Kenmore 110.2485 Operating and installation instructions

))
WATER LEVET SPEEDS
@ ms*i", Heavv DUW . Super Capacity Plus , ALiet Pak . UhG frinse Svsten PUSH&TURN CLOCKWSETOSET
"*^,,a^"..E3rB.A.rr,
LoAo - \\ // i/ )). Lo^o \\ / / n
\\/)/a{sr Yl/
DELICATE NORMAL
slow /aa
CASUAL
Models/M odelos/Moddles 1 1 0.2485*, 2486*, 2487 *
* = color number, nrimero de color, num6ro de couleur
WASH ER CYCLE DESCRI PTIONS
This information covers several different models. Your washer may vary from the model shown and may not have all the cycles and
features described.
:,1,,i,i :::,r1 11.111,11,,, L,,.ii:i:t,t,t,i::,I t. ..lii., I ]] ].,,] :
Adjust to load size. Clothes should move freely. To change to a
higher water level after agitating stads, you may turn knob to
desired setting. On models with Variable Water Level Control, you
should turn the knob to Reset, then to desired setting.
WASH/
SPIN SPEED LOAD TYPE AGITATEi
SPIN SPEED
Delicate Washable knits & Low-speed agitation/
permanent press Low-speed spin
fabrics
You should select the wash/rinse water temperature based on the
type of load you are washing. Always use the warmest water safe
for the fabric and follow garment label instructions. Some models
have AUTO TEMPERATURE CONTROL (ATC). ATC electronically
senses and maintains a uniform water temperature by regulating
temperature of incoming hot and cold water.
On models without AUTO TEMPERATURE CONTROL (ATC)that
do have a Warm/ColdMarm Spray iemperature setting, the
warm wash will be followed by an "Energy Saving" cold rinse
followed by warm spray rinses. This saves energy while providing
the same rinse performance.
Handwash Plus Hand washable Extra-low-speed
Fine Delicates and special care agitation/Soat</
items Low-speed spin
Permanent Press I
A load cooling spray rinse reduces wrinkling.
Permanent Press ll
During the wash cycle, the timer reaches PAUSE, and the washer
cools down the load by replacing some of the wash water with
rinse water. This helps to reduce wrinkling.
Ultra Clean
WASH/
SPIN SPEED LOAD TYPE AGITATE/
SPIN SPEED
Heavy Sturdy or heavily
soiled loads High-speed agitation/
High-speed spin
You may select this cycle for most loads.
Prewash
Helps to remove heavy soils and stains that need pretreatment. This
cycle should be followed by an Ultra Clean or Permanent Press
cycle with additional detergent.
Normal Normally soiled
cottons & linens Low-speed agitation/
High-speed spin
Handwash/
Casual Lingerie &
loosely knit
items
Extra-low-speed
agitation/
Low-speed spin
8543395 Cycle Selections continued

Automatic 2nd Rinse Rinse &Spin
Removes excess detergent residue. May be automatically added
to the Ultra Clean or Permanent Press cycles. Set the RINSE
OPTIONS Control to 2nd Rinse before you staft the washer. You
won't have to come back later to select a second rinse.
Soak
Features agitation followed by unlimited soak time to help
remove heavy soils and stains that need pretreatment. After the
soaking has finished, you should ieset the washer to a Spin
setting to remove water. The Soak cycle should be followed by an
Ultra Clean or Permanent Press cycle with additional detergent.
May be used when an extra rinse is needed to remove additional
detergent residue. Set WATER LEVEL Control, then WATER
TEMPERATURE Control. Set RINSE OPTIONS Controlto One
Rinse and set the SPEEDS Control. You should then set Cycle
Selector fl-imer) Control to a Rinse setting.
Spin Only
A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set RINSE OPTIONS Control to One
Rinse and set the SPEEDS Control. You should then set Cycle
Selector fl-imer) Control to a Spin setting.