Kenmore 134309800 User manual

Printed in U.S.A. P/N134309800(0309)
ContentsContents
ContentsContents
Contents
SUBJECTSUBJECT
SUBJECTSUBJECT
SUBJECT PP
PP
PAGEAGE
AGEAGE
AGE
Product Registration 2
Important Safety Instructions 2-3
Pre-Installation Requirements 4
Electrical Requirements 4
Grounding Requirements 4
Water Supply Requirements 4
Drain Requirements 4
Rough-In Dimensions 5
Location Of Your Washer 6
Unpacking 6
Installation 7-8
Replacement Parts 8
For yoursafetytheinformation
in this manual must be followed to minimize
the risk of
fire or explosion or to prevent property
damage, personal injury or loss of life.
- Do not store or use gasoline or other
flammable vapors and liquid in the vicinity
of this or any other appliance.
--
--
-WHAWHA
WHAWHA
WHAT TO DO IF YOU SMELL GAST TO DO IF YOU SMELL GAS
T TO DO IF YOU SMELL GAST TO DO IF YOU SMELL GAS
T TO DO IF YOU SMELL GAS
··
··
· Do not try to light any appliance.
··
··
· Do not touch any electrical switch; do
not use any phone in your building.
··
··
· Clear the room, building or area of all
occupants.
··
··
· Immediately call your gas supplier from
a neighbor’s phone. Follow the gas
suppliers instructions.
··
··
· If you cannot reach your gas supplier,
call the fire department.
Installation and service must be performed
by a qualified installer, service agency or the
gas supplier.
InstallationInstallation
InstallationInstallation
Installation
InstructionsInstructions
InstructionsInstructions
Instructions
Full Size TFull Size T
Full Size TFull Size T
Full Size Tumble Action Wumble Action W
umble Action Wumble Action W
umble Action Washersashers
ashersashers
ashers
Before beginning installation, carefully read these instructions. This will simplify theBefore beginning installation, carefully read these instructions. This will simplify the
Before beginning installation, carefully read these instructions. This will simplify theBefore beginning installation, carefully read these instructions. This will simplify the
Before beginning installation, carefully read these instructions. This will simplify the
installation and ensurinstallation and ensur
installation and ensurinstallation and ensur
installation and ensure the washer is installed core the washer is installed cor
e the washer is installed core the washer is installed cor
e the washer is installed corrr
rr
rectly and safelyectly and safely
ectly and safelyectly and safely
ectly and safely. Leave these instr. Leave these instr
. Leave these instr. Leave these instr
. Leave these instructionsuctions
uctionsuctions
uctions
near the washer after installation for future reference.near the washer after installation for future reference.
near the washer after installation for future reference.near the washer after installation for future reference.
near the washer after installation for future reference.
NOTE:NOTE:
NOTE:NOTE:
NOTE: The electrical service to the washer must conform with local codes and ordinancesThe electrical service to the washer must conform with local codes and ordinances
The electrical service to the washer must conform with local codes and ordinancesThe electrical service to the washer must conform with local codes and ordinances
The electrical service to the washer must conform with local codes and ordinances
and the latest edition of the National Electrical Code, ANSI/NFPand the latest edition of the National Electrical Code, ANSI/NFP
and the latest edition of the National Electrical Code, ANSI/NFPand the latest edition of the National Electrical Code, ANSI/NFP
and the latest edition of the National Electrical Code, ANSI/NFPA 70.A 70.
A 70.A 70.
A 70.
Sears, Roebuck and Co.,Sears, Roebuck and Co.,
Sears, Roebuck and Co.,Sears, Roebuck and Co.,
Sears, Roebuck and Co.,
Hoffman Estates, IL 60179 U.S.A.Hoffman Estates, IL 60179 U.S.A.
Hoffman Estates, IL 60179 U.S.A.Hoffman Estates, IL 60179 U.S.A.
Hoffman Estates, IL 60179 U.S.A.

2PrintedinU.S.A.
FOR YOUR SAFETYFOR YOUR SAFETY
FOR YOUR SAFETYFOR YOUR SAFETY
FOR YOUR SAFETY
Donotstoreorusegasoline
orotherflammablevaporsor
liquidsinthevicinityofthis
oranyotherappliance.
Your washer is equipped with a door safety interlock. Verify proper operation of interlock system daily,
using the following procedure:
1.Withthewasherdooropen,inserttherequirednumberofcoins(ortheappropriatecard,onmachines
equipped
with a card-start system) and press the START button. THE WASHER MUST NOT START!THE WASHER MUST NOT START!
THE WASHER MUST NOT START!THE WASHER MUST NOT START!
THE WASHER MUST NOT START!
2. Close the washer door. Press the START button again to start the machine. Attempt to open the door,
without exertingexcessiveforce.THEDOORMUSTNOTOPEN!THEDOORMUSTNOTOPEN!
THEDOORMUSTNOTOPEN!THEDOORMUSTNOTOPEN!
THEDOORMUSTNOTOPEN!
II
II
IF THE WASHER STARTS WITH THE DOOR OPEN, OR THE DOOR CAN BE OPENED WHILE THE WASHER ISF THE WASHER STARTS WITH THE DOOR OPEN, OR THE DOOR CAN BE OPENED WHILE THE WASHER IS
F THE WASHER STARTS WITH THE DOOR OPEN, OR THE DOOR CAN BE OPENED WHILE THE WASHER ISF THE WASHER STARTS WITH THE DOOR OPEN, OR THE DOOR CAN BE OPENED WHILE THE WASHER IS
F THE WASHER STARTS WITH THE DOOR OPEN, OR THE DOOR CAN BE OPENED WHILE THE WASHER IS
OPERATING,THEMACHINEMUSTIMMEDIATELYBETAKENOUTOFSERVICE.DISCONNECTTHEPOWERCORD,OPERATING,THEMACHINEMUSTIMMEDIATELYBETAKENOUTOFSERVICE.DISCONNECTTHEPOWERCORD,
OPERATING,THEMACHINEMUSTIMMEDIATELYBETAKENOUTOFSERVICE.DISCONNECTTHEPOWERCORD,OPERATING,THEMACHINEMUSTIMMEDIATELYBETAKENOUTOFSERVICE.DISCONNECTTHEPOWERCORD,
OPERATING,THEMACHINEMUSTIMMEDIATELYBETAKENOUTOFSERVICE.DISCONNECTTHEPOWERCORD,
ANDMARKTHEMACHINE"OUTOFORDER",UNTILTHEINTERLOCKSYSTEMISREPAIRED,ANDOPERATESASANDMARKTHEMACHINE"OUTOFORDER",UNTILTHEINTERLOCKSYSTEMISREPAIRED,ANDOPERATESAS
ANDMARKTHEMACHINE"OUTOFORDER",UNTILTHEINTERLOCKSYSTEMISREPAIRED,ANDOPERATESASANDMARKTHEMACHINE"OUTOFORDER",UNTILTHEINTERLOCKSYSTEMISREPAIRED,ANDOPERATESAS
ANDMARKTHEMACHINE"OUTOFORDER",UNTILTHEINTERLOCKSYSTEMISREPAIRED,ANDOPERATESAS
DESCRIBEDABOVE.DESCRIBEDABOVE.
DESCRIBEDABOVE.DESCRIBEDABOVE.
DESCRIBEDABOVE.
Read all instructions before using this washer.Read all instructions before using this washer.
Read all instructions before using this washer.Read all instructions before using this washer.
Read all instructions before using this washer.
Important Safety InstructionsImportant Safety Instructions
Important Safety InstructionsImportant Safety Instructions
Important Safety Instructions
Toreducetheriskoffire,electricalshock,orinjurytopersons
when using this washer, comply with the basic warnings listed below.
Failure to comply with thesewarningscouldresult in serious
personal injuries.
PrePre
PrePre
Prevent Firevent Fire
vent Firevent Fire
vent Fire
Do not wash items that have been previously cleaned in,
soaked in, or spotted with gasoline, cleaning solvents, kerosene, cooking
oils, waxes, etc. Do not store these items on or near the washer. These
substances give off vapors or chemical reactions that could ignite or
explode.
Donotputoilyorgreasyragsorclothingontopofthewasher.
These substances give off vapors that could ignite the materials.
Donotaddgasoline,cleaningsolvents,orotherflammableor
explosivesubstances to the washwater. Thesesubstances give off vapors
that could ignite or explode.
Under certain conditions, hydrogen gas may be produced in
ahotwatersystemthathasnotbeenusedfor2weeksormore. HYDROGENHYDROGEN
HYDROGENHYDROGEN
HYDROGEN
GAS IS EXPLOSIVE.GAS IS EXPLOSIVE.
GAS IS EXPLOSIVE.GAS IS EXPLOSIVE.
GAS IS EXPLOSIVE. If the hot water system has not been used for such a
period, before using the washer, turn on all hot water faucets and let the
waterflowfromeachforseveralminutes. Thiswillreleaseanyaccumulated
hydrogen gas. Hydrogen gas is flammable; do not smoke or use an open
flame during this time.
Failure to comply with these warnings could result in fire,
explosion,seriousbodilyinjuryand/ordamagetotherubberorplasticparts
of the washer.
Protect ChildrenProtect Children
Protect ChildrenProtect Children
Protect Children
Do not allow children to play on or in the washer. Close
supervisionofchildrenisnecessarywhenthewasherisusednearchildren.
As children grow, teach them the proper, safe use of all appliances.
Destroy the carton, plastic bag and other packing materials
after the washer is unpacked. Children might use them for play. Cartons
covered with rugs, bedspreads or plastic sheets can become airtight
chambers.
Keep laundry products out of children's reach. To prevent
personal injury, observe all warnings on product labels.
Before the washer is removed from service or discarded,
remove the washer lid to prevent accidental entrapment.
Product RegistrationProduct Registration
Product RegistrationProduct Registration
Product Registration
Thank you for choosing this
washer.
Record Your Model andRecord Your Model and
Record Your Model andRecord Your Model and
Record Your Model and
Serial NumbersSerial Numbers
Serial NumbersSerial Numbers
Serial Numbers
Record below the model and
serial numbers found on the
washer serial plate located
on the underside of the
washer lid. Keep these
numbersforfuturereference.
Model Number
_______________
Serial Number
________________
Date of Purchase
______________
Register Your ProductRegister Your Product
Register Your ProductRegister Your Product
Register Your Product
Theself-addressedPRODUCTPRODUCT
PRODUCTPRODUCT
PRODUCT

3
PreventInjuryPreventInjury
PreventInjuryPreventInjury
PreventInjury
Testdoorinterlocksystemdaily.Followinstructionsonprevious
page.
Topreventshockhazardandassurestabilityduringoperation,
thewashermustbeinstalledandelectricallygroundedbyaqualifiedservice
personinaccordancewithlocalcodes. RefertoINSTALLATIONANDSAFETY
INSTRUCTIONSfordetailedgroundingprocedures.Ifthewasherismovedtoa
newlocation,haveitcheckedandreinstalledbyaqualifiedserviceperson.
To prevent personal injury or damage to the washer, the
electricalpowercordofthewashermustbepluggedintoaproperlygrounded
andpolarized3-prongoutlet.ThethirdgroundingprongmustneverbeThethirdgroundingprongmustneverbe
ThethirdgroundingprongmustneverbeThethirdgroundingprongmustneverbe
Thethirdgroundingprongmustneverbe
removed.Nevergroundthewashertoagaspipe.Donotuseanextensionremoved.Nevergroundthewashertoagaspipe.Donotuseanextension
removed.Nevergroundthewashertoagaspipe.Donotuseanextensionremoved.Nevergroundthewashertoagaspipe.Donotuseanextension
removed.Nevergroundthewashertoagaspipe.Donotuseanextension
cord or an adaptor plug.cord or an adaptor plug.
cord or an adaptor plug.cord or an adaptor plug.
cord or an adaptor plug.
Followpackagedirectionswhenusinglaundryproducts.Incorrect
usagecanproducepoisonousgas--resultinginseriousinjuryordeath.
••
••
•DonotDonot
DonotDonot
Donot combinelaundryproductsforusein1loadunlessspecifiedonthe
label.
••
••
•DonotDonot
DonotDonot
Donotmixchlorinebleachwithammoniaoracidssuchasvinegar.
Topreventseriouspersonalinjuryanddamagetothewasher:
••
••
•AllrepairsandservicingmustbeperformedbyanauthorizedservicerAllrepairsandservicingmustbeperformedbyanauthorizedservicer
AllrepairsandservicingmustbeperformedbyanauthorizedservicerAllrepairsandservicingmustbeperformedbyanauthorizedservicer
Allrepairsandservicingmustbeperformedbyanauthorizedservicer
unlessspecificallyrecommendedinthisINSTALLATIONANDSAFETY
INSTRUCTIONSmanual.Useonlyauthorizedfactoryparts.
••
••
•DonotDonot
DonotDonot
Donottamperwithcontrols.
••
••
•DonotDonot
DonotDonot
Donotinstallorstorethewasherwhereitwillbeexposedtotheweather.
Toreducetheriskofelectricshock,disconnectthisappliance
fromthepowersupplybeforeattemptinganyusermaintenance.Turningthe
controlstotheOFFpositiondoesnotdisconnectthisappliancefromthepower
supply.
Topreventinjury,donotreachintothewasherwhilepartsare
moving. Beforeloading,unloadingoraddingitems,pushinthecycleselector
knobandallowthetubtocoasttoacompletestopbeforereachinginside.
Failuretocomplywiththesewarningscouldresultinserious
personalinjuries.
Thiswasherisequippedwithanelectricaloverloadprotector.
Themotorwillstopifitbecomesoverheated.Thewasherwillautomatically
restartafteracooldownperiodofupto30minutes,ifthewasherhasnotbeen
manuallyturnedoffduringthistime.
Important Safety InstructionsImportant Safety Instructions
Important Safety InstructionsImportant Safety Instructions
Important Safety Instructions (continued)(continued)
(continued)(continued)
(continued)
Grounding type
wall receptacle
Power supply
cord with 3-prong
grounding plug
Do not under
any circumstances
cut, remove,
or bypass
the grounding prong
from this plug.
Do not use or mixDo not use or mix
Do not use or mixDo not use or mix
Do not use or mix
liquid chlorine bleach with otherliquid chlorine bleach with other
liquid chlorine bleach with otherliquid chlorine bleach with other
liquid chlorine bleach with other
household chemicals such as toilethousehold chemicals such as toilet
household chemicals such as toilethousehold chemicals such as toilet
household chemicals such as toilet
cleaners, rust removers, acid orcleaners, rust removers, acid or
cleaners, rust removers, acid orcleaners, rust removers, acid or
cleaners, rust removers, acid or
products containing ammonia.products containing ammonia.
products containing ammonia.products containing ammonia.
products containing ammonia.
These mixtures can produceThese mixtures can produce
These mixtures can produceThese mixtures can produce
These mixtures can produce
dangerous fumes which can causedangerous fumes which can cause
dangerous fumes which can causedangerous fumes which can cause
dangerous fumes which can cause
serious injury or death.serious injury or death.
serious injury or death.serious injury or death.
serious injury or death.
Avoid fire hazard orAvoid fire hazard or
Avoid fire hazard orAvoid fire hazard or
Avoid fire hazard or
electrical shock. Do not use anelectrical shock. Do not use an
electrical shock. Do not use anelectrical shock. Do not use an
electrical shock. Do not use an
adaptor plug or extension cord oradaptor plug or extension cord or
adaptor plug or extension cord oradaptor plug or extension cord or
adaptor plug or extension cord or
remove grounding prong fromremove grounding prong from
remove grounding prong fromremove grounding prong from
remove grounding prong from
electrical power cord. Failure toelectrical power cord. Failure to
electrical power cord. Failure toelectrical power cord. Failure to
electrical power cord. Failure to
follow this warning can causefollow this warning can cause
follow this warning can causefollow this warning can cause
follow this warning can cause
serious injury, fire or death.serious injury, fire or death.
serious injury, fire or death.serious injury, fire or death.
serious injury, fire or death.
CORRECTCORRECT
CORRECTCORRECT
CORRECT
Use this way ONLYUse this way ONLY
Use this way ONLYUse this way ONLY
Use this way ONLY
SASA
SASA
SAVE THESE INSTRUCTIONSVE THESE INSTRUCTIONS
VE THESE INSTRUCTIONSVE THESE INSTRUCTIONS
VE THESE INSTRUCTIONS
Note:Note:
Note:Note:
Note: The instructions appearing in
this INSTALLATION AND SAFETY
INSTRUCTIONSmanualarenotmeant
tocovereverypossibleconditionand
situation that may occur. Common
senseandcautionmustbepracticed
when installing, operating and
maintaininganyappliance.

PRE-INSTPRE-INST
PRE-INSTPRE-INST
PRE-INSTALLAALLA
ALLAALLA
ALLATION REQUIREMENTSTION REQUIREMENTS
TION REQUIREMENTSTION REQUIREMENTS
TION REQUIREMENTS
TT
TT
Tools Requirools Requir
ools Requirools Requir
ools Required for Installation:ed for Installation:
ed for Installation:ed for Installation:
ed for Installation:
1. 1/4 in. nut driver
2. 3/8 in. socket with ratchet.
3. 3/8 in. open end wrench.
4. 7/16 in. socket with ratchet.
5. 9/16 in. open end wrench.
6. Channel-lock adjustable pliers.
7. Carpenter’s level.
ELECTRICAL REQUIREMENTSELECTRICAL REQUIREMENTS
ELECTRICAL REQUIREMENTSELECTRICAL REQUIREMENTS
ELECTRICAL REQUIREMENTS
CIRCUITCIRCUIT
CIRCUITCIRCUIT
CIRCUIT - Individual, properly polarized and
grounded15 amp. branchcircuitfused with 15amp.
time delay fuse or circuit breaker.
POWER SUPPLPOWER SUPPL
POWER SUPPLPOWER SUPPL
POWER SUPPLYY
YY
Y - 2 wire, with ground, 120 volt,
single phase, 60 Hz, Alternating Current. NOTE: The
use of this washer with power created by gas
powered generators, solar powered generators,
wind powered generators or and other generator
other than the local utility company is not
recommended.
OUTLET RECEPTOUTLET RECEPT
OUTLET RECEPTOUTLET RECEPT
OUTLET RECEPTACLEACLE
ACLEACLE
ACLE - Properly grounded 3-prong
receptacle to be located so the power supply cord
is accessible when the washer is in an installed
position. NOTE: GFI (Ground Fault Interrupter)
receptacle is not required.
GROUNDING REQUIREMENTSGROUNDING REQUIREMENTS
GROUNDING REQUIREMENTSGROUNDING REQUIREMENTS
GROUNDING REQUIREMENTS
Improper connection of the equipment
grounding conductor can result in a risk of electrical
shock. Check with a licensed electrician if you are in
doubt as to whether the appliance is properly
grounded.
1. The washer MUSTMUST
MUSTMUST
MUST be grounded. In the event of
malfunction or breakdown, grounding will reduce
the risk of electrical shock by a path of least
resistance for electrical current.
2. Since your washer is equipped with a power
supply cord having an equipment-grounding
conductor and a grounding plug, the plug MUSTMUST
MUSTMUST
MUST
be plugged into an appropriate, copper wired
receptacle that is properly installed and grounded
in accordance with all local codes and ordinances
NOTE:NOTE:
NOTE:NOTE:
NOTE:
Drain hose attached to the washer can reach a
58 in. (147 cm) high standpipe. For higher
standpipe use hose P/N 134049201, available
from an authorized parts distributor. If drain
is less than 24 in. (61 cm), install a siphon break
kit, available at your local hardware store.
Models equipped with gravity drain:
1. Floor drain MUSTMUST
MUSTMUST
MUST be capable of eliminating 17
gals (64.3 L) per minute.
2. Floor drain diameter must be at least 1/2 inch
larger than drain hose.
or in the absence of local codes, with the
National Electrical Codes, ANSI/NFPA 70 (latest
edition). If in doubt, call a licensed electrician.
DO NOTDO NOT
DO NOTDO NOT
DO NOT cut off or alter the grounding prong on
the power supply cord. In situations where a
two-slot receptacle is present, it is the owner’s
responsibility to have a licensed electrician
replace it with a properly groundedproperly grounded
properly groundedproperly grounded
properly grounded three prong
grounding type receptacle.
WW
WW
WAA
AA
ATER SUPPLTER SUPPL
TER SUPPLTER SUPPL
TER SUPPLY REQUIREMENTSY REQUIREMENTS
Y REQUIREMENTSY REQUIREMENTS
Y REQUIREMENTS
Hot and coldwater faucets MUSTMUST
MUSTMUST
MUSTbe installed within
42 inches (107 cm) of your washer’s water inlet. The
faucets MUSTMUST
MUSTMUST
MUST be 3/4 inch (1.9 cm) garden hose type
so inlet hoses can be connected. Water pressure
MUSTMUST
MUSTMUST
MUST be between 10 and 120 pounds per square
inch (maximum unbalance pressure, hot vs. cold,
10 psi.) Your water department can advise you of
your water pressure. The hot water temperature
should be about 140 degrees F (60 degrees C).
DRAIN REQUIREMENTSDRAIN REQUIREMENTS
DRAIN REQUIREMENTSDRAIN REQUIREMENTS
DRAIN REQUIREMENTS
Models equipped with drain pump:
1. Drain MUSTMUST
MUSTMUST
MUST be capable of eliminating 17 gals
(64.3 L) per minute.
2. A standpipe diameter of 1-1/4 in. (3.18 cm)
minimum.
3. The standpipe height above the floor should be:
Minimum height: 24 in. (61 cm)
Max.Max.
Max.Max.
Max.

ROUGH-IN DIMENSIONSROUGH-IN DIMENSIONS
ROUGH-IN DIMENSIONSROUGH-IN DIMENSIONS
ROUGH-IN DIMENSIONS
ì
ë
>
8
43/8 <>
v
^
(20.4)
(11.2)
(43.2)
17
<

6
LOCALOCA
LOCALOCA
LOCATION OF YOUR WTION OF YOUR W
TION OF YOUR WTION OF YOUR W
TION OF YOUR WASHERASHER
ASHERASHER
ASHER
DO NOT INSTDO NOT INST
DO NOT INSTDO NOT INST
DO NOT INSTALL YOUR WALL YOUR W
ALL YOUR WALL YOUR W
ALL YOUR WASHER:ASHER:
ASHER:ASHER:
ASHER:
1. In an area exposedtodripping water or outside
weather conditions. The ambient temperature
should never be below 60 degrees F (15.6
degrees C) for proper washer operation.
2. In an area where it will come in contact with
curtains or drapes.
3. In an area (garage or garage-type building)
where gasoline of other flammables are kept
or stored (including automobiles).
4. On carpet. Floor MUSTMUST
MUSTMUST
MUST be solid with a
maximum slope of 1/2 in. per foot (1.27 cm
per 30.5 cm). To ensure vibration or movement
does not occur, reinforcement of the floor may
be necessary.
IMPORIMPOR
IMPORIMPOR
IMPORTT
TT
TANTANT
ANTANT
ANT
MINIMUMINSTMINIMUMINST
MINIMUMINSTMINIMUMINST
MINIMUMINSTALLAALLA
ALLAALLA
ALLATIONCLEARANCESTIONCLEARANCES
TIONCLEARANCESTIONCLEARANCES
TIONCLEARANCES
When installed in alcove: Sides, Rear, Top = 0 in
(0 cm).
When installed in closet: Sides, Rear, Top = 0 in
(0 cm), Front = 1 in (2.54 cm).
Closetdoorventilationopeningsrequired: 2louvers
each 60 in2(387 cm2) - 3 in (7.6 cm) from top and
bottom of door. UNPUNP
UNPUNP
UNPACKINGACKING
ACKINGACKING
ACKING
1. Cut the shipping carton along the dotted line
along the base of the unit.
2. While in the carton carefully lay the washer
on its back side.
3. Remove the styrofoam base.
4. Carefully return the washer to an upright
position and remove the carton.
5. Carefully move the washer to within 4 feet
(122cm) of the final location.
6. Remove the following from the back side of
the washer: 3 bolts,
3 yellow plastic spacers,
7. Remove the service panel from the front of the
washer.
8. Remove the 4 nuts and 6 large washers that
attach the 2 yellow shipping braces to the drum
and the base. Lift up on the drum and remove
the braces (a yellow ribbon surrounds the items
to be removed). These braces must be removed
to allow the power supply cord to be released
from the shipping ring.
9. Remove the large styrofoam block locatedunder
the drum. Lift up on the drum, tilt the base of
the foam block inwards toward the rear of the
washer until free, then pull it out.
10. Removeanddiscardthe yellow ribbon andlabel
from the front of the washer.
11. From the rear of the washer, carefully pull out
the power supply cord through the hole in the
backsheet.
12. Replace the service panel and screws.
NOTE:NOTE:
NOTE:NOTE:
NOTE: If the washer is to be transported at a
later date, the shipping support
hardwaremustbereinstalledtoprevent
shipping damage.
BOLT
SPACER
"P" CLAMP

7
INSTINST
INSTINST
INSTALLAALLA
ALLAALLA
ALLATIONTION
TIONTION
TION
1. Run some water from the
hot and cold faucets to flush
the water lines and remove
particles that might clog up
the water valve screens.
2. Remove the inlet hoses and
rubber washers from the
plastic bag and install the
rubber washers in each end
of the inlet hoses.
3. Carefull connect the inlet
hose (90°elbow end) marked
"HOT" to the outside "H"
oulet of the water valve.
Tighten by hand, then
tighten another
2/3 turn with pliers.
Carefully connect the other inlet hose to the
inside "C" outlet of the water valve. Tighten by
hand, then tighten another 2/3 turn with pliers.
Do not crDo not cr
Do not crDo not cr
Do not crossthrossthr
ossthrossthr
ossthread or overead or over
ead or overead or over
ead or over-tighten these-tighten these
-tighten these-tighten these
-tighten these
connections.connections.
connections.connections.
connections.
4. Connect the inlet hose ends
to the HOT and COLD water
faucets tightly by hand, then
tighten another 2/3 turn
with pliers. Turn the water
on and check for leaks.
5. On machines equipped with
drain pump, form a U shape
on the end of the drain hose,
with the hose pointed
toward the drain.
NOTE:NOTE:
NOTE:NOTE:
NOTE: If the drain hose is placed in a standpipe
without forming a U shape, a siphoning action could
occur. There must be an air gap around the drain
hose. A snug hose fit can also cause a siphoning
action.
6. On machines equipped with
gravity drain, connect one end
of the drain hose to the drain
outlet of the machine, using
the provided clamp.
Cable
Tie
Cable
Tie
7. Carefully move the washer to its final location.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Do not use the dispenser drawer or door
to lift washer.
8.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Keep the leg extension at a minimum to
prevent excessive vibration. The farther out
the legs are extended the more the washer
will vibrate.
Rear leg adjustments are also accessible through the
front service panel.
9. Models equipped with drain pump:Models equipped with drain pump:
Models equipped with drain pump:Models equipped with drain pump:
Models equipped with drain pump: Place the formed
end of the drain hose in a laundry tub or a standpipe
and secure with the cable tie provided in the enclosure
package.
With the washer in its final position, place a
level on top of the washer. Adjust the front
leveling legs up or down to ensure the washer is
resting solid. Turn the lock nuts on each leg up
towards the base of the washer and snug with a
wrench.

8
Models equipped with gravity drain:Models equipped with gravity drain:
Models equipped with gravity drain:Models equipped with gravity drain:
Models equipped with gravity drain: Run
the machine's drain hose into an oversized
floor drain or drain trough. The entire
length of the drain hose must be below
the drain outlet on the machine.
NOTENOTE
NOTENOTE
NOTE: The drain pipe or floor drain, into
which the drain hose is placed,
MUSTMUST
MUSTMUST
MUST be at least 1/2 inch larger in
diameter than the drain hose. This
will insure that the sewer line
cannot back up into the washing
machine.
8. Plug the power cord into a grounded outlet.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Check to ensure the power is off at
the circuit breaker/fuse box before
plugging the power cord into an
outlet.
9. Turn on the power at the circuit breaker/
fuse box.
10. Be sure you have read the "Important
Safety Instructions" on pages 2-3 before
operating this washer.
11. Run the washer through a complete cycle. Check
for water leaks and proper operation.
12. Keep these instructions for future reference.
NOTE:NOTE:
NOTE:NOTE:
NOTE: A wiring diagram is located inside the
washer on the service panel.
REPLACEMENT PREPLACEMENT P
REPLACEMENT PREPLACEMENT P
REPLACEMENT PARAR
ARAR
ARTSTS
TSTS
TS
If replacements parts are needed for your washer, call
Sears Parts and Service Toll Free Number 1-800-4-MY-
HOME(1-800-469-4663)
Destroy the carton and plastic bags
afterthewasherisunpacked.Childrenmightusethem
for play. Cartons covered with rugs, bedspreads, or
plastic sheets can become airtight chamberscausing
suffocation. Place all materials in a garbage container
or make materials inaccessible to children.
The instructions in this manual and
all other literature included with this washer are not
meantto cover everypossiblecondition and situation
that may occur. Good safe practice and caution MUSTMUST
MUSTMUST
MUST
be applied when installing,operating and
maintaining any appliance.
Maximumbenefits and enjoyment are achievedwhen
all the Safety and Operating instructions are
understood and practiced as a routine with
your laundering tasks.