Kenmore 501-40002 Operating instructions

Sears, Canada Inc.
Get it fixed, at your home or ours!
Your Home
In USA for repair–in your home–of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
In Canada, for repair in your home of all major brand
appliances, no matter who made it, no matter who sold it
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800-4-MY-HOME (1-800-469-4663)
Call anytime, day or night (U.S.A. and Canada)
www.sears.com www.sears.ca
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & epair Center.
1-800-469-4663 Call anytime, day or night (Sears Canada)
www.sears.com www.sears.ca
To purchase a protection agreement (U.S.A.)
or maintenance agreement (Canada) on a product serviced by Sears:
1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)
Au Canada pour service en français:
1-800-LE-FOYE MC
(1-800-533-6937)
www.sears.ca

MFL31245115

roduct Feature
P
ontents
C
2
Warranty ...............................................................................................3
Important Safety Information.................................................................4
Specification..........................................................................................5
Installation.............................................................................................6
Preparation Before Washing...............................................................11
Adding Detergent................................................................................12
Cycles ..............................................................................................13
How to Use Washer............................................................................14
Maintenance .......................................................................................17
Troubleshooting Guide........................................................................20
Direct Drive System
The advanced Brushless DC motor directly drives the drum without a
belt or pulley.
Built-in Heater
The internal heater automatically heats the water to the best
temperature for the selected cycles.
Child Lock
The Child lock prevents children from pressing any buttons to change
the settings during operation.
More Economical By Intelligent Wash System
Intelligent Wash System detects the amount of load and water
temperature, and then determines the optimum water level and
washing time to minimize energy and water consumption.
Low Noise Speed Control System
By sensing the amount of load and balance,it evenly distributes load
to minimize the spinning noise level.

arranty
W
3
One Year Limited Warranty
When installed, operated and maintained
according to all instructions supplied with the
product, if this appliance fails due to a defect in
material or workmanship within one year from
the date of purchase, call 1-800-4-MY-HOME®to
arrange for free repair. If this appliance is used
for other than private family purposes, this
warranty applies for only 90 days from the date
of purchase.
This warranty covers only defects in material
and workmanship. Sears will NOT pay for:
1. Expendable items that can wear out from
normal use, including but not limited to filters,
belts, light bulbs, and bags.
2. A service technician to instruct the user in
correct product installation, operation or
maintenance.
3. A service technician to clean or maintain this
product.
4. Damage to or failure of this product if it is not
installed, operated or maintained according to all
instructions supplied with the product.
5. Damage to or failure of this product resulting
from accident, abuse, misuse or use for other
than its intended purpose.
6. Damage to or failure of this product caused by
the use of detergents, cleaners, chemicals or
utensils other than those recommended in all
instructions supplied with the product.
7. Damage to or failure of parts or systems
resulting from unauthorized modifications made
to this product.
Disclaimer of implied warranties; limitations
of remedies
Customer’s sole and exclusive remedy under
this limited warranty shall be product repair as
provided herein. Implied warranties, including
warranties of merchantability or fitness for a
particular purpose, are limited to one year or the
shortest period allowed by law.
Sears shall not be liable for incidental or
consequential damages. Some states and
provinces do not allow the exclusion or limitation
of incidental or consequential damages, or
limitations on the duration of implied warranties
of merchantability or fitness, so these exclusions
or limitations may not apply to you.
This warranty applies only while this appliance is
used in Canada.
This warranty gives you specific legal rights, and
you may also have other rights which vary from
state to state.
Sears Canada Inc.
Toronto, Ontario, Canada M5B 2B8
In the space below, record your complete model
number, serial number and purchase date. You
can find this information on the model and serial
number label.
Have this information available to help you quickly
obtain assistance or service when you contact
Sears concerning your appliance.
Model Number:
Serial Number:
Purchase Date:
Save these instructions and your sales receipt
for future reference.
Kenmore Appliance Warranty - Canada

4
mportant Safety Information
I
For your safety, the information in this manual must be followed to minimize the risk of fire
or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
!
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
• Read all instructions before using the washer.
• Do not wash articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry cleaning solvents, or other
flammable or explosive substances, as they give
off vapors that could ignite or explode.
• Do not add gasoline, dry cleaning solvents, or
other flammable or explosive substances to the
wash water. These substances give off vapors
that could ignite or explode.
• Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not
been used for such a period, before using the
washing machine, turn on all hot water faucets
and let the water flow from each for several
minutes. This will release any accumulated
hydrogen gas. As the gas is flammable, do not
smoke or use an open flame during this time.
• Do not allow children to play on or in the washer.
Close supervision of children is necessary when
the washer is used near children.
• Before the washer is removed from service or
discarded, remove the door to prevent children
from hiding inside.
• Do not install or store the washer where it will
be exposed to the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance
instructions or published user-repair instructions
that you understand and have the skills to carry
out.
• See Installation Instructions for grounding
requirements.
• Do not use heat to dry articles containing foam
rubber or similarly textured rubber-like materials.
• Interior of washer and condensing duct should be
cleaned periodically by qualified service
personnel.
•ALWAYS follow the fabric care instructions
supplied by the garment manufacturer.
• Do not place items exposed to cooking oil in your
dryer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause
a load to catch fire.
•Do not use fabric softeners or products to
eliminate static unless recommended by the
manufacturer of the fabric softener or product.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a
cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
• Do not use an adapter or extension cord.
• Do not remove ground prong.
• If you don’t have the proper outlet, consult an electrician.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock, or injury to persons when using the
washer, follow basic precautions, including the following:
SAVE THESE INSTRUCTIONS
WARNING : Improper connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
!
!

5
for removing shipping bolts
And leveling the washer
pecification
S
 Accessories
Shipping Bolts
Dispenser
Drain Hose
Door
Lower Cover
Adjustable Feet
Power Plug
Control Panel
Drum
Lower Cover Cap
Drain Plug
Drain Pump Filter
Name: Front-loading Washing Machine
Power supply: 120V~, 60Hz
Size: 233/5”X 213/5”X 331/2”, 401/4”(D, door open)
600 mm X 550 mm X 850 mm, 1022 mm (D, door open)
Weight: 128 lbs. (58 kg)
Spin speed: 1300 rpm max.
Permissible water pressure: 4.5 ~ 145 PSI (30 ~ 1000 kPa)
❋Specifications subject to change by manufacturer.

nstallation
I
6
1. To prevent internal damage during transport,
4 locking bolts are installed. Before operating
the washer, remove the bolts.
•If they are not removed, it may cause severe
vibration, noise, and malfunction.
3. Take out the 4 bolts by twisting the braces
slightly. Keep the 4 bolts and the wrench for
future use.
•Whenever the appliance is transported, the
shipping bolts must be replaced.
2. Unscrew the 4 bolts with the wrench
supplied. 4. Close the holes with the caps supplied.
The appliance is fitted with shipping bolts to prevent internal damage during transport.
■Shipping bolts
Install or store unit where it will not be exposed to temperatures below freezing or exposed to outside
weather conditions.
Properly ground washer to conform with all governing codes and ordinances.
To reduce the risk of electric shock, do not install the washer in humid spaces.
The base opening must not be obstructed by carpeting when the washer is installed on a carpeted floor.
In areas where there are areas which may be subject to infestation by cockroaches or other vermin, pay
particular attention to keeping the appliance and its surroundings in clean condition at all times.
Damage caused by cockroaches or other vermin will not be covered by the appliance warranty.
■Removing shipping bolts
cap

7
nstallation
I
■Installation clearances
The location must be large enough to fully
open the washer door.
■Washer dimensions
•Most installations require a minimum 4 in.
(10 cm) clearance behind the washer.
■Minimum installation spacing
for recessed area installation.
The following dimensions shown are for the
minimum spacing allowed.
Additional spacing should be considered for
installation and servicing.
•Additional clearances might be required for
wall, door and floor moldings.
•Additional spacing of 1 in. (2.5 cm) on all
sides of the washer is recommended to
reduce noise transfer.
Companion appliance spacing should also be
considered.
■Level floor
■Power outlet
•Allowable slope under entire washer is 1°.
• To minimize noise and vibration, the
washer MUST be installed on a solidly
constructed floor.
•Carpeting and soft tile surfaces are not
recommended.
•Never install the washer on a platform or
weakly supported structure.
• Must be within 60 in. (1.5 m) of either side of
the washer. Do not overload the outlet with
more than one appliance.
• Time-delay fuse or circuit breaker is
recommended.
[Front view]
[Side view]
It is the personal responsibility and
obligation of the customer to have a
proper outlet installed by a qualified
electrician.
A firm, solid floor is even more critical
to a front-loading washer than to a
top-loader. If your floor is wood and/or
frame construction, you may need to
reinforce it. Front-loaders use
substantially faster spin speeds than
top-loaders, causing greater vibration.
If the floor is not solid, your washer will
vibrate. You will hear and feel the
vibration throughout your house.
23
3/5
"
(60 cm)
21
3/5
"
(55 cm)
33 1/2"
(85 cm)
40
1/4
"
(102.2 cm)
23 3/5"
(60 cm)
1"
(2.5 cm) 1" (2.5 cm)
21 3/5"
(55 cm) 4"
(10 cm)

8
nstallation
I
•Water supply pressure must be between
4.5 and 145 PSI (30~1000 kPa).
•Do not crossthread when connecting the inlet
hose to the valve.
•If the water supply pressure is more than
145 PSI, a pressure reducing device should
be installed.
•Two sealing washers are supplied with the
water inlet hoses to prevent water leaks.
•Check for leakage of washing machine
connections by turning the tap completely on.
•Periodically check the condition of the hoses
and replace the hose if necessary.
•Make sure the hose is not kinked or crushed.
•Be sure that the two water input ports are
connected to the correct water faucets.
The connector for hot water is colored red.
 Use new hoses to connect a new washing machine. Old hoses should not
be re-used.
 Connecting water supply hose
 Electrical connection
•Do not use an extension cord or double adapter.
•If the supply cord is damaged, it must be replaced by a qualified person in order to avoid a hazard.
•If the machine will not be used for an extended time, unplug it and shut off the water supply.
•Connect the machine to a grounded outlet in accordance with current wiring regulations.
•The appliance must be positioned so that the plug is easily accessible.
•Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out
by inexperienced persons may cause injury or serious malfunctioning. Contact your local service
center.
•Do not install your washing machine in rooms where temperatures below freezing may occur.
Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired
at temperatures below freezing point.
•If the appliance is delivered in the winter months and temperatures are below freezing, store the
washing machine at room temperature for a few hours before putting it into operation.

9
nstallation
I
Installation of drain hose
max. 47"
min. 24"
about 41"
about 72"
about 79"
max. 47"
min. 24"
Hose
Retainer
Laundry tub
Tie
strap max. 47"
min. 24"
max. 47"
about 41"
about 72"
about 79"
min. 24"
•The drain hose should not be placed higher than 47”above the floor.
•Properly securing the drain hose will protect the floor from damage due to water leakage.
This washer is not designed for maritime use or for mobile installations such as in RVs,
aircraft, etc.
Turn off the faucet if the machine is to be left for an extended period of time (e.g. vacation).
When disposing of the appliance, cut off the power cable and destroy the plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
of suffocation! Keep all packaging from children.
•When installing the drain hose at a sink,
secure it so it cannot break away and
cause flooding and damage.
•Properly securing the drain hose will
protect the floor from damage due to
water leakage.

10
nstallation
I
 Level adjustment
Concrete floors
Wooden floors
1. Adjusting the washing machine level properly prevents excessive
noise and vibration.
Install the appliance on a solid and level floor surface, preferably in a
corner of the room.
2. If the floor is uneven, adjust the adjustable feet as required.
(Do not insert pieces of wood etc. under the feet)
Make sure that all four feet are stable and resting on the floor and
then check that the appliance is perfectly level. (Use a spirit level)
※※
After the washer is level, tighten the lock nuts towards of the base of the
washer. All lock nuts must be tightened.
❊ Diagonal Check
When pushing down the edges of the washing machine top plate
diagonally, the machine should not move up and down at all.
(Check in both directions)
If the machine rocks when pushing the machine top plate diagonally,
adjust the feet again.
•The installation surface must be clean, dry and level.
•Install washer on a flat, hard floor.
Tile floors (Slippery floors)
•Position each foot on the Tread Mat and level the machine to suit (Cut the Tread Mat into 2 3/4inch
squares and stick the pieces to the dry tile where machine is to be placed).
※※
Tread Mat is a self adhesive material used on ladders & steps to prevent slipping.
•Wooden floors are particularly susceptible to vibration.
•If possible install the washer in one of the corners of the room, where the floor is more stable.
•If your floor has too much flex in it, you may need to reinforce it to make it more rigid.
Important!
•Proper placement and levelling of the washer ensure long,regular and reliable operation.
•The washer must be absolutely horizontal and stand firmly in position.
•It must not move when any corner is pressed.
•The installation surface must be clean, free from floor wax and other lubricant coatings.
•Do not let the feet of the washer get wet. If the washer feet get wet, slipping may occur.
Timber or suspended type flooring may contribute to excessive
vibration and unbalance errors.

11
reparation Before Washing
P
1. Fabric Care Labels
Look for a care label on your clothes. This will tell you about the fabric content of your
garment and how it should be washed.
2. Sorting
To get the best results, sort clothes into loads that can be washed with the same wash cycle.
Different fabrics need to be washed in different ways.
Always sort dark colors from light colors and whites. Wash separately as dye and lint transfer
can occur causing discoloration of white clothing. If possible, do not wash heavily soiled
items with lightly soiled ones.
Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.
Color (White, Lights, Darks) Separate white fabrics from colored fabrics.
Lint (Lint Producers, Collectors) Wash lint producers and lint collectors separately.
3. Check before loading
WARNING - To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
• Combine large and small items in a load. Load large items first. Large items should not be
more than half the total wash load.
• Do not wash single items. This may cause an out-of-balance load. Add one or two similar
items.
•Check all pockets to make sure that they
are empty. Things such as nails, hair
clips, matches, pens, coins and keys can
damage both your washer and your
clothes.
•Secure zippers, hooks, and strings to
make sure that these items don’t snag on
other clothes.
•Pre-treat dirt and stains by brushing a
little detergent dissolved in water onto
stains like collars and cuffs to help shift
dirt.
Do not wash or spin water-proof clothes.
!
 Before the first washing
Select the Normal cycle, add about 1/2 the recommended amount of detergent in the
dispenser, and allow the unit to wash without clothing. This will remove any residue from
the drum that may remain after manufacturing.
Remember to use only HE (High Efficiency) detergent in this machine.

12
dding Detergent
A
•Do not exceed the maximum fill line.
Overfilling can cause early dispensing of
the fabric softener which could stain
clothes.
•Do not leave the fabric softener in the
detergent drawer for more than 2 days.
(Fabric softener could harden)
•Softener will automatically be added
during last rinse cycle.
•Do not open the drawer when water is
supplied.
•Solvents (benzene, etc.) should not be
used.
1. The Dispenser Drawer
Your washer is designed to use only High
Efficiency (HE) detergents.
HE detergents are formulated specifically for
front load washers and contain suds-reducing
components.
HE detergents make less suds, improve
washing and rinsing performance, and help to
keep the interior of your washer clean.
If a regular detergent is used, it may cause
oversudsing and unsatisfactory performance.
For the best washing and rinsing
performance, low-sudsing HE detergents
required.
•Because reducing the amount of detergent
may reduce cleaning, it is important to
pretreat stains, sort carefully by color and
soil level, and avoid overloading.
•Detergent usage may need to be adjusted
for water temperature, water hardness, size
and soil level of the load. For best results,
avoid using too much detergent.
•Detergent is dispensed at the beginning of
the cycle.
4. Detergent usage
•Do not open the dispenser drawer during
water fill cycle.
•Bleach will be dispensed automatically after
the detergent has had time to work.
•Do not exceed the maximum fill line.
3. The liquid bleach dispenser
2. Adding Fabric Softener
Adding detergent and fabric softener
MAX
max
Do not pour fabric softener
directly on the clothes
Designed specially to use only
HE (High Efficiency) detergent

13
ycles
C
■Select cycles designed for different types of fabric and soil levels.
Stain
Cycle Quick Cycle Extra Rinse Warm Rinse
Soak
Rinse+
Spin
Extra Hot 1000
1300
No Spin
900
1000
1300
No Spin
900
1000
1300
No Spin
900
800
1000
No Spin
400
600
600
800
No Spin
400
400
600
800
No Spin
400
600
800
No Spin
900
1000
1300
No Spin
1000
1300
No Spin
900
1300
No Spin
900
1000
Hot
Warm
Cold
Hot
Warm
Cold
Hot
Warm
Cold
Warm
Cold
Warm
Cold
Warm
Cold
Warm
Rinse and spin
Drain+
Spin Drain/Spin only

14
ow to Use Washer
H
•Rotate the Cycle selector knob to
select cycle designed for different types
of fabric and soil levels.
•Each cycle has a preset Water
Temperature and Spin Speed
(See page 13).
•The preset settings can be changed
anytime before START is pressed.
2. Cycles
•Use this button to turn the Power On/Off.
1. Power ( )
This front load washer requires
longer cycle time and gets
clothes much cleaner, yet is
more gentle on the fabrics, than
top load washers. Washing time
can be reduced significantly for
small loads or lightly soiled loads
by selecting Quick Cycle option.
•Select a water temperature based on
the type of load you are washing.
•Follow the fabric care label and chart
below for best results.
3. Wash Temperatrue
Suggested Wash Temp. Garment
Kitchen towels, sheets,
and baby garments
Whites and Heavy
soiled color-fast items
Most loads
Brightly colored items,
washable woolens
Sanitary
(Extra Hot)
Hot
Warm
Cold
•Cold rinses save energy.
•The Cold rinse temperatures depend on
the cold water at your faucet.
Delay Wash Spin Speed

15
ow to Use Washer
H
OPTION
MULTI DISPLAY
•This option provides an additional rinse.
•Use this option to ensure the removal of
detergent or bleach residue from
garments.
4. Extra Rinse
•This display shows:
a) the estimated time remaining in the
cycle when operating,
b) the error code when an error has
been detected (See page 22).
•Provides a set time for soaking, then
automatically moves into the wash cycle.
•Use this option to wash normal clothes or
thick and heavy clothes which are
excessively dirty.
3. Soak
•The Quick Cycle offers a quick cycle
time.
•Suggested uses include freshening newly
purchased clothes, or clothing that has
been packed away.
2. Quick Cycle
•Add time to the wash and rinse for better
stain removal.
•Automatically provides a rinse.
1. Stain Cycle
5. Warm Rinse
• Warm rinses leave the load dryer than cold
rinses. Warm rinses increase wrinkling.
• In cold climates, a warm rinse makes the
load more comfortable to handle.
•To change the spin speed, press the
Spin Speed button repeatedly to cycle
through available options.
•Spin Speed is available according to
the program (See page 13).
6. Spin speed
•Use this button to Start/Stop the washer.
4. Start/Pause ( )
•Allows the start of any cycle to be delayed
for 1~19 hours.
•Choose the wash cycle for your load, and
then press the Delay Wash button once
for one hour or press the button again to
increase the delay wash time up to 19
hours in one hour increments.
5. Delay Wash

16
ow to Use Washer
H
CHILD LOCK
DOOR LOCK
•Lights whenever the door of the washer
is locked.
•The door can be unlocked by pressing
the Start/Pause ( ) button to stop the
washer. It will unlock after 1~2 minutes.
If the water temperature or the
level is too high, the door cannot
be unlocked.
Do not try to force the door open
when DOOR LOCK ( )
lights on.
•Use this option to prevent unwanted use
of the washer. Press and hold the Delay
Wash button for 3 seconds to
lock/unlock control.
•When Child lock is set, blinks and
all buttons are disabled except the
Power ( ) button. You can lock the
washer while it is operating.

17
aintenance
M
The water inlet filter
- error message will blink on the control panel when water does not enter the
detergent drawer.
- If your water is very hard or contains traces of lime deposit, the water inlet filter may
become clogged.
It is a good idea to clean it from time to time.
The drain pump filter
󳢬 The drain filter collects threads and small objects left in the laundry.
Check regularly that the filter is clean to ensure smooth running of your machine.
CAUTION Drain, using the drain hose, before opening the pump filter to remove objects.
󳢬 Allow the water to cool down before cleaning the drain pump, carrying out emergency
emptying or opening the door in an emergency.
󳢬Before cleaning the washer interior, unplug the electrical power cord to avoid
electrical shock hazards.
1
100
2
323
1. Turn off the
water tap. 2. Unscrew the
water inlet
hose.
3. Clean the filter
using a hard
bristle brush.
4. Tighten the
inlet hose.
1. Open the lower
cover cap 󳡉by
using a coin. Drain
plug 󳡊to pull out
the hose.
2. Unplug the drain plug 󳡊,
allowing the water to flow out. At
this time use a vessel to prevent
water flowing onto the floor. When
water does not flow any more, turn
the pump filter 󳡋open to the left.
3. Remove any foreign objects from
the pump filter 󳡋.
After cleaning, turn the pump
filter 󳡋clockwise and insert the
drain plug 󳡊to the original
place. Close the lower cover cap.
!

18
aintenance
M
Dispenser drawer
❋ After a while, detergents and fabric softeners leave a build-up in the drawer.
•It should be cleaned from time to time with a running water.
•If necessary, it can be removed completely from the machine by pressing the catch
downward and by pulling it out.
•To facilitate cleaning, the upper part of the fabric softener compartment can be removed.
The drawer recess
❋ Detergent can also accumulate inside the recess which should
be cleaned occasionally with an old toothbrush.
•Once you have finished cleaning, replace the drawer and run a
rinse cycle without laundry.
The washing drum
•If you live in a hard water area, lime scale can continuously build up in places where it cannot be seen
and it is not easily removed from the drum. Over time, the build-up of scale clogs appliances, and if it
is not kept in check, these will eventually have to be replaced.
•Although the washing drum is made of Stainless steel, specks of rust can be caused by small metal
articles (paper clips, safety pins, etc.) which have been left in the drum.
•The washing drum should be cleaned from time to time.
•If you use descaling agents, dyes, or bleaches, make sure they are suitable for washing machine use.
•Descaler could contain components that can damage part of your washing machine.
•Remove the spots with a stainless steel cleaning agent.
•Never use steel wool.
MAX
max
MAX
max

19
aintenance
M
■Cleaning your washer
1. Exterior
Proper care of your washer can extend its life.
The outside of the machine can be cleaned with warm water and a neutral, non-
abrasive household detergent.
Immediately wipe off any spills with a damp cloth.
Try not to damage the surface with sharp objects.
󳢬IMPORTANT: Do not use methylated spirit, solvents, or similar products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass. These areas
should always be clean to ensure a water-tight seal.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
Remove hard water deposits using only cleaners labeled safe for washing
machines.
■Winterizing instructions
If the washer is stored in an area where freezing can occur or moved in freezing
temperatures, follow these winterizing instructions to prevent damage to the washer:
1. Turn off water supply tap.
2. Disconnect hoses from water supply and drain water from hoses.
3. Plug electrical cord into a properly grounded electrical outlet.
4. Add 1 gallon (3.8ℓ) nontoxic recreational vehicle (RV) antifreeze to the empty
wash drum. Close door.
5. Set spin cycle and let washer spin for 1 minute to drain all the water.
Not all of the RV antifreeze will be expelled.
6. Unplug electrical power cord, dry drum interior, and close door.
7. Remove the two-compartment container from the Dispenser. Drain any water in
compartments and dry the compartments.
8. Store washer in an upright position.
9. To remove antifreeze from washer after storage, run empty washer through a
complete cycle using detergent. Do not add laundry.