Kensington M01238 User manual

Kensington® USERMANUAL
M01238(Keyboards) Introduction
1.Introduction
1.1 Product Briefing
M01238 is designed for using iPad mini with in Bluetooth Wireless Keyboard technology and
recharge Li-ion battery. The main proposal is for mobility and easy carry with iPad mini to
build into one leather case. Keyboard use notebook scissors design.
1.2 BLUETOOTH SPECIFICATIONS
Bluetooth Chip: Broadcom BCM20730
Bluetooth specification version 3.0 compatible.
Bluetooth HID profile version 1.0 compliant.
Bluetooth Radio Power: Class 2 or Class 3 requirements
RF Frequency Range: 2.402 ~ 2.480 GHz
Receive Sensitivity: -84dBm
This keyboard built-in li-ion polymer battery is charged through MicroUSB port.
This device is compatible with Apple Tablet , NEW iPad and iOS Version 4.3 +
1.3 POWER REQUIREMENTS
Battery: 1 Li-ion polymer battery
Working voltage range: 4.2V~3.0V
Charge current: 100mA
Rating: 3.7V / 250mA
1.4 WEIGHT AND DIMENSIONS
1. Weight: 207 g
2. Dimensions: 205 x 140 x 5.5 mm (only KB side without IPAD holder)
3. Dimensions: 205 x 140 x 15.6 mm
1.5 IDENTIFICATION AND MARKING
1. Label

Kensington® USERMANUAL
It would be pasted on the lower case to cover the injection point. Please refer
to the picture below.
3.1.2 IPAD mini angle X = 120°±10°
3.1.3 IPAD mini angle Y= 155°±10°
Label location

Kensington® USERMANUAL
KEYBOARD OUTLINE Dimensions

Kensington® USERMANUAL
FCC ID:GV3M01238
FCC Statement:

Kensington® USERMANUAL
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
IC:6128A-M01238
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.