Kensington W2050 Pro User manual

Kensington W2050 Pro 1080p Auto Focus Webcam
Register your webcam at kensington.com/register

1a. Plug the webcam cable into any available USB-A port.
"1b. For USB-C, connect the included USB-A to USB-C adapter to the end of the webcam
cable, then plug the adapter into any available USB-C port."
2a. LED Indicator: The camera and microphones are live when this light is on.
2b. Autofocus 1080p Lens:This lens is optimized to help you look your best when using your webcam with video conferencing applications.
2c. Privacy Cover: Manually slide this cover to the left to block the camera when you are not actively engaged in a conference call—to ensure you are only
being seen when you want to be seen.
2d. Omnidirectional Stereo Microphones: Built-in noise-reduction technology helps you sound your best and allow others to focus on your voice.
2e. Universal Mounting Clip: Use this clip to mount your webcam directly onto your device.

3a. Open the clip by extending it away from the camera lens.
3b. Slide the camera into the desired position on your device (usually centered).
3c. Secure the back side of the clip to the back of your device.
3d. Ensure the webcam is secure and stable.

4a. Slide the Privacy Cover to the right to allow others to see you.
4b. Leave the Privacy Cover in this position when you are actively engaged in a video call.
5a. Manually swivel your webcam up to 360 degrees horizontally.
5b. Manually adjust up to 37 degrees vertically to help you get the most flattering angle.
Download Kensington Konnect™ today at kensington.com/konnect

For other Webcam Mounting options, please visit kensington.com/pro-video-conferencing
For support, visit kensington.com/support