Kenwood DDX7025 User manual

2-DIN CAW-1142-02
Installation kit includes the following items:
* 1X 2-ISO 100 mm. metal bracket
* 2X Mounting plates
* 2X Mounting spacers
* 2X Radio removal keys
* 4X Screws
* 2X Cushion
Installation manual for:
Hyundai Tucson
* Mount the plates.
Use this hole
Use this hole
Kenwood DDX6029
We advice to use the following positions.
Other positions are also possible.
Use position 1 marked with a cross.
Use position 6 & 8 marked with an arrow.
Measured from left to right.
Kenwood DDX 7025
We advice to use the following positions.
Other positions are also possible.
Use position 1 marked with a cross.
Use position 14 & 16 marked with an arrow
Measured from left to right.

2-DIN 12.301142-02
Use a plastic wig te remove the panel
surrounding the gear lever.
Gently remove the silver trim. This is
tighten by a click system
Place the headunit
Remove the screws at the location of the
arrows. Remove the metal ring.
Place the metal bracket and tighten the
four screws. Remove the orginal bracket
which is indicated at the middle arrows
Connect all of the needed wiring harnesses and check all the connections carefully.
12
34
5
You need to order one of the below mentioned
panels. This can be ordered at the Hyundai dealer.
Order this panel when to car is
equipped with a climatic control.
Article number: 847612E211X9
Order this panel when to car is
equipped with a manual airco.
Article number: 847612e201x9
2-DIN CAW-1142-02