
DPX-MP7050
6
Pin No. Pin Name I/O Application
Truth Value
Processing Operation Description
Table
48 CD_PON O Power SW for CD_DSP L : ON (While CD sourcing)
49 PM_MOT1 O Panel motor control 1 r
50 PM_MOT2 O Panel motor control 2 r
51 PM_VR O Panel mechanism voltage control
52 PM_DET I Panel mechanism detection
53 PM_OPEN I Panel full-open detection
54 CD_MOTOR O CD motor control terminal wRefer to the truth value table.
55 CD_LOEJ I/O CD motor control terminal wRefer to the truth value table.
56 CD_LOE_LIM_SW I CD detection terminal (Chucking SW) H : Loading complete, L : No disc.
57 CD_DISC8_SW I Not used.
58 CD_MSTOP O CD mechanism µ-com stop terminal H : Mechanism µ-com in operation
L : Mechanism µ-com in stop
59 CD_MUTE_L I CD MUTE(Lch) request terminal L : Lch mute request
60 CD_LOS_SW I CD loading detection terminal
61 CD_DISC12_SW I CD detection terminal (12cm)
62 VCC -
63 CD_MUTE_R I CD MUTE(Rch) request terminal L : Rch mute request
64 VSS -
65 CD_MRST O CD mechanism µ-com RST terminal H : Normal, L : Reset
66 TEL_TYPE I
Setting for whether hand-free function exists or not
H : Exists, L : No function.
67 TA_MSC O TAPE music change SW L : FF/Rewinding, H :Other
68 TA_MUSIC I TAPE between music detection L : Music exists.
69 TA_PACKDET I TAPE PACK detection L : PACK exists.
70 TA_MODE1 I TAPE mode detection 1
71 TA_MODE2 I TAPE mode detection 2
72 TA_MODE3 I TAPE mode detection 3
73 TA_SMOTOR1 O TAPE sub motor control 1 e
74 TA_SMOTOR2 O TAPE sub motor control 2 e
75 TA_MOTOR O TAPE main motor control H : ON
76 TA_FR O TAPE PLAY direction change SW H : REVERSE, L :FORWARD
77 TA_EQ_MUTE O TAPE EQ MUTE change SW L :TAPE playing, H : Other than playing (MUTE)
78 TA_DOLBY O TAPE DOLBY change SW H : ON
79 TA_METAL O TAPE METAL change SW H : NORMAL, L : METAL
80 TEL_V_DOWN O TEL DSP control terminal (Not used.) H : In operation.
81 TEL_V_RST O TEL DSP Reset terminal (Not used.) H : In operation.
82 TEL_MUTE O TEL MUTE terminal (Not used.) L :TEL in use.
H : Other than TEL, momentary power dropped
83 MUTE O MUTE H : MUTE ON.
84 MUTE_PWIC O Power IC MUTE control L : ALL OFF, momentary power dropped
85 ASEL1 O INPUT SEL change terminal 1 q
86 ASEL2 O INPUT SEL change terminal 2 q
87 FM+B O FM power supply control H : FM (However, AM+B is L)
88 AM+B O AM power supply control H : AM (However, FM+B is L)
89 TUN_SD I Station detection H : Station exists.
90 NC I
91 TUN_SMETER I S-meter input
92 REFCON O A/D reference voltage output
93 PM_MODE I Panel mechanism position detection
94 CD_DET I CD detection L : CD exits. (A/D input) Vth : 2.2V
MICROCOMPUTER’STERMINAL DESCRIPTION
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299