Kenwood DP-560 User manual

‘COMPACT
DISC
PLAYER
DP-560
INSTRUCTION
MANUAL
KENWOOD
©PRINTED IN JAPAN BS0-6785-10(K, P, U, M, UE, X, T, EXT)
88/12 1110987
may
result
in
hazardous
radiation
exposure.
DIGITAL AUDIO
Fe
CAUTION:
Use
of
controls
or
adjustments
or
perfor-
in
compliance
with
Federal
Regulations,
following
are
mance
of
procedures
other
than
those
specified
herein
reproductions
of
labels
on,
or
inside
the
product
relating to laser product safety.
KENWOOD CORPORATION
SHIONOGI SHIBUYA BUILDING
17-5, 2-CHOME, SHIBUYA,
SHIBUYA-KU, TOKYO, JAPAN
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS NO. 21 CFR
1040.10, CHAPTER |, SUBCHAPTER J.
Location: Back panel
DANGER invisis.e Laser
RADIATION WHEN OPEN AND IN-
TERLOCK FAILED OR DEFEATED,
AVOID DIRECT EXPOSURE TO BEAM.
Location: Inside, near the Laser me-
chanism.
Safety precautions
an B
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO
REDUCE
THE
RISK
OF
ELECTRIC
SHOCK,
DO
NOT
REMOVE
COVER
(OR
BACK).
NO
USER-SERVICEABLE
PARTS
INSIDE.
REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated ‘’dangerous voltage’ within the prod-
uct’s
enclosure
that
may
be
of
sufficient
magnitude
to
constitute
a
risk
of
electric
shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence
of
important
operating
and
maintenance
(servicing)
instructions
in
the
literature accompanying the appliance.

For your records
Record the serial number, found on the back of the
unit,
in
the
spaces
designated
on
the
warranty
card,
and
in
the
space
provided
below.
Refer
to
the
model
and
serial
numbers
whenever
you
call
upon
your
dealer
for information or service on this product.
Model__.._-=—— Serial number
After unpacking
After unpacking, we recommend that you inspect the
unit
for
any
possible
shipping
damage.
If
your
unit
is
damaged or fails to operate, notify your dealer im-
mediately. If your unit was shipped to you directly,
notify the shipping company without delay. Only the
consignee
(the
person
or
company
receiving
the
unit)
can file a claim against the carrier for shipping damage.
We
recommend
that
you
retain
the
original
carton
and
packing materials to prevent any damage should you
transport or ship your unit in the future.
Before applying power
Important!
USA, Canada, Australia, U.K and Europe
Unit shipped to the above are not equipped with an AC
voltage selector switch and the discussion of such a
switch that follows should be disregarded.
All other countries
Units shipped to countries other than the above are
equipped with an AC voltage selector switch on the rear
panel. Refer to the following paragraph for the proper
setting of this switch. |
WARNING:
TO PREVENT FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
2 vP-séo (k)
AC voltage selection
This
unit
operates
on
120
volts
or
220-240
volts
AC.
The
AC
voltage
selector
switch
on
the
rear
panel
is
set
to
the
voltage
that
prevails
in
the
area
to
which
the
unit
is
shipped.
Before
connecting
the
power
cord
to
your
AC
outlet,
make
sure
that
the
setting
position
of
this
“switch
matches
your
line
voltage.
If
not,
it
must
be
set
to
your
voltage
in
accordance
with
the
following
direc-
tion.
Note:
Our
warranty
does
not
cover
damage
caused
by
excessive
line
voltage
due
to
improper
setting
of
the
AC
voltage
selector
switch.
AC120V~
«pe
AC220—240V~,
AC120V~
«p>
AC220~240V~,
Switch
lever
= ®
This shows switch
lever is flocked in AC
120V~ position.
This shows switch
fever is locked in AC
220-240V~\ position.
Move
switch
lever
to
match
your
line
voltage
with
a
small
screwdriver
or
other
pointed
tool.
AC voltage selector switch
For United Kingdom
The
mains
plug
must
be
removed
from
the
wall
socket
prior
to
any
internal
examination.
Important
The
wires
in
this
mains
lead
are
coloured
in
accor-
dance
with
the
following
code:
Blue
Neutral
Live
The
wires
in
this
mains
lead
must
be
connected
to
the
terminals
in
the
plug
as
follows:
Wire
colour
Plug
terminal
marking
BiG:
contisstsussteesassadccences
eco
N
or
Black
BROWN:
osgicvszassteesiedeabewadean
L
or
Red
Notes:.
1}
If
a
13-amp
plug
is
used,
this
must
be
fitted
with
a
5-amp
fuse.
2)
!f
a
3-pin
plug
with
earthing
contact
is
used,
no
wire
must
[ be connected to the E terminal.

Before operation
Transportation screw
Before
operation,
remove
the
two
red
screws
attached
to
the
bottom
of
the
unit
used
during
transport
from
the
factory.
Remove
both
screws
using
4
coin,
etc.
and,
after
removing,
retain
them
together
with
the
Warranty
card
and
other
documents.
When
the
unit
is
to
be
transported
again,
be
sure
replace
the
two
screws
to
their
original
position:
*
For
the
procedure
of
attaching
the
transport
screws,
refer
to page 10.
Beware of condensation
Water vapor in the air may condense on cold parts, forming
“‘dew"' on its surface.
For example, when a bottle taken out of the refrigerator and
brought into a warn room, dropets of water will form on the
bottle surface. This phenomenon is called ‘‘condensation’’.
If this occurs of the unit internally, the player may operate in-
correctly or may not function at all.
This is not a malfunction, however, the player should be left
until it is dry. (Turn the power of this unit ON and leave the
player for a while. After several hours, even in the worst case,
the player wil! stabilize and correct playback will be possible.)
Be especially careful in the following cases:
@ When the unit is suddenly brought from a cold place to 4
warm place (causing rapid temperature change).
© When the temperature of the room is raised suddenly us-
ing a heater, etc.
e When the unit is brought from a well-cooled (aircondition-
ed) room to a damp and hot room.
¢ In conditions where the temperature difference between
the surroundings and this unit might cause condensation.
Notes on installation
1. Do not place the unit in a place which is exposed to direct
sunlight, near a heating appliance, etc.
2. Do not place a vase containing water, makeup, etc. on the
unit. De not use in a humid place.
3. To maintain good ventilation, place the unit at least 10 cm
away from the walls.
4, Choose a location that is relatively free from vibration or
excessive dust.
5. Keep the unit away from a source of magnetic fields such
as TV sets, motorized toys, etc.
Safety precautions
Never remove the case. if the internal parts are touched ac-
cidentally, a serious electric shock might occur.
Never touch internal parts.
Touching the power plug when your hands are wet may result
in a serious electric shock.
‘ “7
ys
S)
6
Never touch with wet hands.
68
——==
Never pull, bend or extend the power cord. This could
damage the power cord, resulting in a broken cord or short-
circuit.
Always grasp the plug.
In case of abnormal smell
If an abnormal smell or smoke is detected, immediately turn
the power OFF and pull out the power cord. Contact your
dealer or nearest Service Station.
Cleaning
Do not use volatile solvents such as alcohol, paint thinner,
gasoline, benzine, etc. to clean the cabinet. Use a silicone
cloth or a clean dry cloth.
Silicone cloth = Thinner Benzine

Controls and indicators
Numbers in circles correspond to the diagram, symbols in brackets correspond to front panel indications.
@ o °@
SET araaT eae Id
(BGs be od]
@ @ 8 680 @ @
@ POWER switch @ Memory key
Press to turn the power on. Pressing again turns the Used to store the desired tunes for memory play.
power off. in the stop mode, select the desired tunes using the SKIP
(kt, BI) keys and then press the MEMORY key. The
@ Disc tray M-READ indicator lights to show that the program tune is
This will be opened or closed by pressing the stored in memory.
OPEN/CLOSE (4) key.
Place
a
disc
on
this
tray
with
its
label
surface
up.
@
MANUAL
SEARCH
keys
(<<,
p>)
e
OPEN/CLOSE
key
(4)
Press
to
go
quickly
in
the
forward
or
backward
direction.
ey
(A
Used
to
open/close
the
disc
tray.
(3)
SKIP
keys
(l¢<,
bi)
When
this
key
is
pressed
during
play,
the
disc
rotation
Press
to
play
the
next
tune
or
the
tune
being
played
from
will
stop
and the
disc
tray
will
be
opened.
the
beginning.
e
When
this
key
is pressed
with
the
tray closed,
the
tray
is
opened.
©
PLAY/PAUSE
key
(>
1D)
When
it
is pressed
in
the
middie
of
tray
opening,
the
tray
When this key is pressed, the PLAY indicator lights and
the play starts. When it is pressed again, the PAUSE in-
dicator lights and the unit enters the pause mode.
When the key is pressed with the tray opened, the tray is
closed and then the play starts after the disc information
(TOC) is read out. If the tunes are programmed using the
@ \-READ key MEMORY key, the memory play will be started.
will be closed.
e After the tray is closed, the disc information (TOC = Table
Of Contents) will be read out and then the unit will enter
the stop mode automatically.
Press to recall the memory contents for checking: the
M-READ indicator lights and the memory contents are @ STOP key (BB)
displayed every three seconds automatically. When this key is pressed during play, the play stops.
C5] REPEAT key
Press this key to play the disc repeatedly.
The repeat function will be cancelled pressing the
REPEAT key again.

@ Display window
@ REPEAT indicator
Lights in the repeat mode.
@ M-READ indicator
Lights when the M-READ key is pressed.
@® M-PLAY indicator
Lights when the tunes are programming.
@® TIME display
*
When
a
disc
is
loaded
and
the
unit
is
set
to
stop
mode,
the
total
playing
time
of
the
disc
is
displayed.
¢
During
play,
the
elapsed
time
of
the
tune
being
played
is displayed.
®
In
the
stop
mode,
when
the
tunes
are
programming,
the
total
playing
time
of
the
programmed
tunes
is
displayed.
@® TRACK NO. display
This shows the number of the track.
PLAY indicator (>)
Lights during play.
@ PAUSE indicator (I)
Lights when the unit is in the pause mode.

System connections
@ Make system connections with the power turned off.
I Speaker systems
Turntable
tJ == SC)
ve=0 0 O OFEEr6 =
oe eens aa ee ts |
When connected to an integrated amplifier |
When connected to a control and power amplifier!
Pre-main amp |
DP-560
L oa srvorsomen
ea Oa .
6: L]
To AC outlet
Power cord connection
Connect the power cord to a convenient AC outlet.
Connection to the amplifier
Connect the OUTPUT jacks to the right and left CD, TUNER,
TAPE IN or AUX jacks of the amplifier.
Note:
Do not connect the OUTPUT jacks to the PHONO jacks of the
amplifier.
System control
Refer to “System control jacks’’ on the 11 page (Except for
some areas).

Operating
instructions
How
to
load
a
compact
disc
Disc
tray
Press
the
OPEN/CLOSE
(4)
key
to
open
or
close
the
tray.
The
~
tray
can
also
be
closed
by
pressing
the
front
of
the
tray
lightly.
©
‘The
disc
is
inserted
with
the
labeled
side
up.
ne
Wake
sure
of
the
side
of
the
disc.
The
disc
cannot
be
played
if
itis
placed
upside
down,
;
2,
Do
not
place
objects
other
than
disc
on
the
disc
tray.
3,
Be
sure
to
place
a
disc
correctly,
B To use the pause mode
Press the PLAY/PAUSE (>, Hi) key.
e The PAUSE indicator will fight up and the pickup will stop
at that point.
© Press the PLAY/PAUSE (>, §9} key again to restart playing
from the point.
Labeled side
When
the
disc
tray
is
closed
with
the
OPEN/CLOSE
(4)
or
the
front
panel
of
the
tray
is
pressed,
the
display
window
shows
the
total
playing
time
of
the
disc.
‘ce No, TIME
aoe
| £ 1 5 t
Manual playback
& To play a disc
@ Turn the POWER switch ON.
@
Press
the
OPEN/CLOSE
(4)
switch
to
open
the
disc
tray.
@ Place the disc in the tray with the label facing up.
@ Press the PLAY/PAUSE (>, ff) key.
©
After
the
final
selection
has
been
played,
the
player
will
go
into
the
stop
mode.
ae BS Se bs ga
et a ee
Geececeee
|"
®
ba bs es
310F
=
aa
——————
=
sen
@ To stop disc play
Press the STOP (EB) key.
Play will stop, the pickup will return to the beginning of the
first selection.
i To play a particular track
@Select the desired Track No. using the SKIP (lta, ppl)
keys.
@Press the PLAY/PAUSE (>, If) key within about 3 seconds
after selection.
e The Track No. and the PLAY indicator will light up. After
the pickup has moved to the beginning of the tune, the
player will begin play.
° After the final selection has been played, the pickup will
automatically return to the beginning of the first selection.
aad
ees
—————————————————
=ps
®
@O/ \O

Ei To select another selection during play
@ Press the SKIP key (ppl). The pickup will search the begin-
ning of the next selection.
e When it is done during play of the final selection, the
pickup will return to the beginning of the first selection.
@A press of the SKIP key (lt )will move the pickup to the
beginning of the selection being played.
e Even with the disc tray open, a press of the SKIP keys
(keq, pel), will display the selected track. A subsequent
press of the PLAY/PAUSE (p>, I) key will automatically
close the tray and start play from the selection. If the
PLAY/PAUSE (p>, #) key is pressed again so that the
PAUSE indicator, the pickup will go into the pause mode at
the beginning of the selection.
we (BGs Go aa
‘SURO — aad net eT,
& To play from the desired position
® Fast forward and fast backward operations
During playing or in the pause mode, press the MANUAL
SEARCH (pm) key for fast forward play and press the
MANUAL SEARCH (<4) key for fast reverse play.
e When one of the keys is pressed during play and held, a
small sound is heard during fast movement. To start the
play from the desired position, listen to the sound and
release the key at the desired point. If the fast forward
movement exceeds the end of the last tune or if the fast
reverse movement exceeds the beginning of the first tune,
the CD player enters the stop mode (as long as the
REPEAT key has not been pressed).
SoS
mopruqse sto commouso s¥srUeE
§ DP-560 (kK)
Memory play
Tre memory play allows the desired tunes to be played in the
desired order. The maximum of 20 selections can be put into
memory.
& To program the selection
@Press the STOP (Bl) key.
@Select the desired Track No. using the SKIP keys (ke4,
bel).
@Press the MEMORY key.
*® The Track No. will be back lit, and the selected track will
be memorized in Channel 1.
* Unless the MEMORY key is pressed within 3 seconds after
selecting the Track No., the programming will be aborted.
@To continue to program further selections, repeat the pro-
cedures in 2. and 3. The maximum number of selections
for memory is 20. More than 20 selections cannot be
memorized. Any attempt to program tunes exceeding the
number will be cancelled.
e To program quickly without waiting 2 or 3 seconds, select
the next Track No. When the next Track No. is selected,
the current memory operation is completed.
vcr)
=.
& To confirm a memorized selection
Press the M-READ key.
© The Track No. and Channel No. of the memorized selec-
tions can be confirmed beginning at the Channel 1. Each
channel contents will be displayed for about 3 seconds.
Memory indications will not appear when the selections are
not in memory.
353]
PUAIPAGSE
. =
storraiun StAvO CONTROLLED SYSTTAH

i
To
erase
the
memory
press
the
OPEN/CLOSE
(4)
key.
e
The
memory
will
be
erased
when
the
disc tray
is
opened
with
the
OPEN/CLOSE
(4)
key
or
the
power
is
turned
off.
SSS
See
REA
RAT
aA
FERS
=
=
i
\RoProOA
SERVO
CONTROULED
BYTE
EB To stop memory play
Press the STOP (I) key.
®
Play
is
discontinued,
the
pickup
returns
to
the
beginning
of
the
first
selection
of
the
disc,
and
the
disc
will
stop.
FE! ar
| sewvo contnonn srSt0m
Hi
To
play
the
memorized
selections
@Program
the
desired
selections
in
accordance
with
the
pro-
cedures
in
‘‘To
program
the
selection’’
on
page
8.
@Press
the
PLAY/PAUSE
(>,
IB)
key.
e
The
M-PLAY
indicator
will
light
to
show
that
the
player
is
in
the
memory
play
mode.
©
The
player
will
play
only
memorized
channels.
©
inthe
memory
play
mode,
a
blank
of
more
than
4
seconds
will
automatically
be
placed
between
selections.
—S
ws = ie in
am 8 be 98
ec ee
ig ent eo
PTT
Err
|
@ To use the pause mode
Press
the
PLAY/PAUSE
(>,
If}
key
once.
©
The
PAUSE
indicator
will
light
to
‘stop
play
at
the
point
where
the
PLAY/PAUSE
(>,
ff)
key
was
pressed.
©
To
resume
play,
press
the
PLAY/(>
,
If)
PAUSE
key
again.
Saat
GES
_
aA
ow
ES
=
&
To
play
from
a
specific
selection
Press
the
SKIP
keys
(ké,
PBI)
to
call
on
the
desired
chan-
nel.
@pPress
the
PLAY/PAUSE
(>,
IB)
key.
seam
aoe
pti
A
ry
‘STOR
PLAYAPAUSE
Hab
Ge
sa
|
:
[>
Se
EOE
ae
a
mi
[|
a
ps
orm
O/\®
f&
To
select
another
selection
during
play
Press
the
SKIP
key
(pl).
Play
will
then
be
discontinued
and
the
pickup
will
advance
to
the
next
selection
on
the
disc.
When
the
key
is
pressed
during
play
of
the
final
selection,
the
pickup
will
return
to
the
first
channel
of
the
memory.
@
if
the
SKIP
key
(ea)
is
pressed,
play
will
also
be
discon-
tinued,
and
the
pickup
will
return
to
the
beginning
of
the
selection
under
play.
A
continuous
press
of
the
key
will
reverse
the
pickup
to
the
beginning
of
the
previous
selection.
When
the
player
is
in
the
pause
mode,
the
pickup
will
move
to
the
beginning
of
the
selected
track.
ener
=
+f
‘stop
PLAYPAUSE
Babe
bs
ae
a
=
i
PEGE
RD
A
RT
RO
ae
seu ane coment sr
ch

B Repeat playback
Repeat playback can be activated or canceled any time, i.e.
when the tray is open, during memory or normal playback.
When the REPEAT key is pressed, the indicator will light.
e During memory playback, repeat playback is activated on-
ly from the trackes programmed in memory.
® During normal playback, all tracks are repeated.
@ To cancel repeat playback, press the REPEAT key again,
press the STOP key, or open the tray.
Note:
Repeat playback is also canceled when TOC has been read.
SR
SG ae oo eT
10 op-seo tk)
EWUl OG WIbEbEG
Should this unit require servicing, be sure to repack the unit
with original carton box and material.
Sending the unit without repacking may result in damaged
finish or malfunction.
Before repacking, be sure to secure the laser pick-up system
with the transportation screws as follows.
1. Turn the power ON without loading disc.
2. Turn OFF the power after the display shows the following
indication.
ia 50. ane
myn [ ey
iu H
3. Install the transportation screws.
Notes on handling compact dises
Handling
Compact discs are made of plastic (polycarbonate). When the
recorded side of the compact disc is dirty or scratched,
playback may be noisy or sound may be missed. Even when
the label side is scratched, the recording may be damaged.
Handle compact discs carefully. Do not stick tape, etc. to
compact discs.
Cleaning
When a compact disc is contaminated with fingerprints, etc.,
wipe with a dry cloth in a radial direction. Never use chemical
solvents, such as thinner, benzene, etc. anid conventional
record cleaners or aerosols.
Storage
Always replace the compact disc in its case and store it. Com-
pact discs are adversely affected by heat and moisture. Do
not store compact discs in a place exposed to direct sunlight
or where humidity is high.
Additional precautions
When performing connections, always disconnect the power
cord from the AC outlet. When setting the power switch
(POWER) to OFF, always turn the volume control of the
amplifier to minimum.

in case of difficulty
lf
your
unit
should
not
perform
as
expected,
consult
the
table
below
to
see
if
the
problem
can
be
corrected
before
seeking
help
from your dealer or service representative.
Symptom
Possible cause
Remedy
Even when the POWER switch is turn-
ed ON, the power is not supplied.
The power plug is not properiy fitted.
Reconnect the power plug properly
into the AC outlet.
When a disc is loaded, it does not
start play.
. Disc is loaded upside down.
. Disc is dirty.
. Optical system collects dew.
. The player is in the roulette play
mode.
1. Reverse the disc.
2. Clean the disc.
3. Keep the unit warm for an hour.
4. The amplifier should be switched
out of the roulette play mode.
No sound.
Loose connection
Connect the connection cord tightly.
Sound skipped
1. Disc is very dirty.
2. Disc is greatly damaged.
3. Vibration is transmitted to the
i unit.
1. Clean the disc.
2. Replace the disc with the new
one.
3. Move the unit to a place where no
vibration is transmitted to the set.
Selection searching time is extremly
long.
Disc is dirty or damaged.
Clean the disc or replace it with the
new one.
Tray does not open even after the
OPEN/CLOSE (4) switch is pressed.
. Improper insertion of a power
plug.
. Transportation screws are not
1. Insert the power plug tightly into
the AC outlet.
2. Remove the transportation screws.
removed.
System control jacks
(Except for some areas)
Connect this jack to the system control jack for system con-
trol. For details, refer to ‘‘System control connections’’ on the
back page.
Receivers KR-V126R, KR-V106R, KR-V86R, KR-V76R or
KR-A56R can be connected to this jack (except some areas).
Synchro operation
When this unit is used together with the KC-206 preamplifier
or the KR- series receivers, the synchro operation becomes
possible.
Specifications
Number of channels ....
Frequency response .
Dynamic range...... -92 dB or more
Signal to noise ratio ...94 dB
Total harmonic distortion ...... 0.007% at 1 kHz
Channel separation .. .90 dB at 1 kHz
Wow & flutter... -Unmeasurabie limit
Line output leveli/impedance ..1.6 V/3.3 kohms
Constant linear velocity ........ 1,2 - 1.4 misec.
Quantization -16 bits linear 1 channel
Sampling frequency . 44.1 kHz
...2 channels
-5 Hz — 20 kHz, +1 dB
The remote control unit supplied with the KC-206 or the KR-
series receivers can contro! the PLAY > /ff PAUSE, STOP (i)
and SKIP (ked/pp!) operations. The numeric keys on the
remote control unit can also be used.
The synchro operation with the cassette deck used (KX-96W,
KX-76R, KX-66CW/KX-66W) is also allowed.
For detailed information, refer to the Instruction Manual of the
KC-206 preamplifier, KR- series receiver, or the KX-96W,
KX-76R, KX-66CW/KX-66W cassette decks.
Power consumptions...
Dimentions
15 W
»W 420 mm (16-9/16%
H 87mm ( 3-7/16”%)
D 262 mm (10-5/16")
..3.8 kg (8.36 Ib}
Weight (Net) ..
Note:
We follow a policy of advancements in development. For this reason
specifications may be changed without notice.

System
control
connections
(Except
Europe
and
U.K.)
Turntable (KD-66F)
i ae
Power amplifier
(KM-206/KM-106)
Control amplifier (KC-206)
lols osdceseed be ne
Fr l@ €@0@@eee4 fe pO
Tuner
{KT-76/KT-56)
——— || —— ay
Tapedeck (KX-96W) Pe on ie cutian
Notes:
1. Fer connections of the audio cords, refer to the ‘’System connections”
diagram.
2. in some models except KT-76, KT-56 the AC outlet is not provided. Obtain
an extension cord to connect the power cords to the KT-76, KT-56.
The
remote
control
socket
on.
This
unit
is
only
for
use
with
associated
models
which
are
not
available
on
the
U.K.
market.