Kenwood VR-407 User manual

or theU.S.A.
FCCWARNING
This equipment may generate or use radio frequency energy Changes
or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction
manual The user could lose the authority to operate this equipment ifan
unauthorized change or modification is made
NOTE
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules These
limits are designed to provide reasonable protection against harmful
interference in a residential installation This equipment may cause
harmful interference to radio communications, if it is not installed and
used in accordance with the instructions However, there is no guaran-
tee that interference will not occur in a particular installation If this
equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of
the following measures:
- - Reorient or relocate the receiving antenna
- - Increase the separation between the equipment and receiver
- - Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
- - Consult the dealer or an experienced radio/TV technician for help
Forthelt.S.A.
This reminder is provided to call the CAN system installer’s attention to
Article 820-40 of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry
AS an ENERGY STAR@ Partner, Kenwood Corpora-
Maintenance of the unit
When the front panel or case becomes dirty, wipe with a soft, dry
cloth Do not use thinner, benzine, alcohol, etc for these agents may
cause discoloration
In regard to contact cleaner
Do not use contact cleaners because it could cause a malfunction
Be specially careful not to use contact cleaners containing oil, for
they may deform the plastic component
h
-
Beforeapplyingthepower ,, ... .,. ..... 2
A Safety precautions 2
Unpacking 2
How to use this manual 4
Special features 4
Namesandfunctionsofparts .. . ,. . ,. 5
Settingupthesystem,..........,.. .......,... 8
Connecting audio components a
Connecting video components 9
Connecting a DVD player (6-channel input) (VR-
407/406/KRF-V7030DN6030D/V5030DA/4530D
only) 9
Digital connections 10
Connecting to the AUX IN jacks (VR-407/KRF-
V7030D only) 11
Connecting the antennas 11
Connecting the system control 12
Connecting the speakers 13
Channel space switching 14 >.:2
Preparing the remote control ;-;<
14 ‘<4’
Preparingforsurroundsound ,.. ... ..
Speaker settings
Normalplayback. . . . * . ,,. ...*
Preparing for playback
Listening to a source component
Adjusting the sound
Recording,,..,.,,,.....,............... ........
Recording audio (analog sources) ,* i”
Recording video 19
Recording audio (digital sources)
Listeningtoradiobroadcasts.,. .... ,... ki
Tuning radio stations 20
Presetting radio stations manually 20
Receiving preset stations
Receiving preset stations in order (P CALL)
Ambienceeffects....... .... .. .
Surround modes
Surround play
DVD 6-channel playback (VR-407/406/KRF-
V7030DN6030D/V5030DN4530D only)
Convenient functions
. a In caseofdifficrdty . ..... . . .~.~ .
Specifications. .,. ,. . ,.. ..
Guichstartguide. . .. ... ,.. . .... 1
Gettingthemost
fromyourremotecontrol. ...-..-... .... *
Setupcodechart ... .. .. .,,,.,. ..
In caseofdifficulty .. .,. . ,,. ..........
Remoteoperationof othercomponents.. 6