Kenyon B80405 User manual

BRIDGE INDUCTION COOKTOPS
OWNERS MANUAL
Part # 145523
Created: January 27, 2021
Revised: December 12, 2022
www.CookWithKenyon.com

Contents
Name Plate
Label Location
Please read & save
these instructions
Thank you for choosing Kenyon,
the world’s leading manufacturer
of specialty cooking appliances.
By following the instructions in this
owners manual, your cooktop will
provide you with many years of
reliable service.
To ensure our ability to continue
serving you, please use this page
to record important product
information.
For quick reference
please keep a
record here:
Purchase date
Model number
Serial number
Name plate location
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS..............3
Product Specications
Electrical Supply Requirements.............................6
Burner Specications.............................................7
Product Dimensions...............................................8
Cleaning and Care
Cleaning the Cooktop..........................................10
Use Good Quality Cookware...............................10
Operation
How Induction Cooking Works............................11
Cookware Noise..................................................11
Indicator Lights....................................................11
Available Power...................................................11
Turning On..........................................................12
Operating the Cooking Zone(s)...........................12
Turning Off..........................................................12
Automatic Zone Power-Off..................................12
Power Levels.......................................................12
Bridge Mode........................................................13
Boost Mode ........................................................14
Simmer Mode .....................................................14
Cookware Detection............................................15
Operation Time Limitation....................................15
Temperature Setting Guide..................................15
Safety Lock Mode...............................................16
Child Lock...........................................................16
Timer Options......................................................17
Optional Silicone Mat..........................................18
Error Code Readout.............................................19
Installation
Unpacking the Cooktop.......................................20
Check Electrical Supply Requirements...............20
Countertop Preparation.......................................21
Installing the Cooktop..........................................22
Electrical Connection...........................................23
Final Preparations Prior to Use...........................23
Warranty.............................................................24

Read this section BEFORE operating and installing
the cooktop. The following information applies
to all KENYON Electric Cooktops.
IMPORTANT SAFETY INSTRUCTIONS
THIS COOKTOP, LIKE ALL APPLIANCES, HAS THE POTENTIAL TO
CREATE SAFETY PROBLEMS THROUGH CARELESS AND
IMPROPER USE. PLEASE OBSERVE ALL OF THE
FOLLOWING SAFETY PRECAUTIONS.
Proper Installation.
Be sure your appliance is properly installed
and grounded by a qualied technician.
Never use your appliance for warming or
heating the room.
CAUTION
Do not leave children alone.
Children should never be left alone or
unattended in the area where the appliance is
in use. They should never be allowed to sit or
stand on any part of the appliance. Do not let
children play with cooktop. Do not store items
of interest to a child in cabinets above the
cooktop, children climbing on the cooktop to
reach such items could be seriously injured.
Wear proper clothing/apparel.
Loose tting or hanging garments should
never be worn while using the appliance.
Fabric or other ammable materials may
contact hot surfaces during operation and
may ignite and result in personal injury.
USER SERVICING
Do not repair or replace any part of the
appliance. If service ever becomes necessary,
this appliance should be serviced by
AUTHORIZED PERSONNEL ONLY or call
KENYON Customer Care at [phone].
Storage in or on Appliance
Flammable materials should not be stored
above, under or near surface cooking units.
Keep ammable materials away from
cooktop.
Do not store plastic material (such as
plastic utensils) in storage areas beneath
cooktop.
Plastic items with low melting temperatures
should not be stored under/over or near the
cooktop.
Do not use water on grease res.
Smother re or ame or use dry chemical or
foam-type extinguisher.
Use only dry potholders.
Moist or damp potholders on hot surfaces may
result in burns from steam. Do not let
potholder touch the heating elements on the
appliance. Do not use a towel or other bulky
cloth in place of a potholder.
3

IMPORTANT SAFETY INSTRUCTIONS
Do not cook on a broken cooktop.
If the cooktop should break or crack, cleaning
solutions and spillovers may penetrate the
broken cooktop and create a risk of electric
shock. Contact an authorized service center or
KENYON Customer Care immediately at
[phone].
Clean cooktop with caution.
If a wet sponge or cloth is used to wipe spills
on a hot cooking surface, be careful to avoid
steam burns. Some cleaners produce noxious
fumes if applied to a hot surface. Read the
cleaner label for details prior to using.
DO NOT TOUCH SURFACE UNITS OR
AREAS NEAR UNITS.
Surface units may be hot. Areas near
surface may become hot enough to cause
burns. During and after use, do not touch,
or let clothing or other ammable materials
contact surface units until they have had
sufcient time to cool. Among these areas
are the cooking zone and surrounding glass
surface.
DO NOT TOUCH COOKING ZONES
The cooking zones on the cooktop may be
hot. These areas may be hot enough to
cause burns. Never touch cooking zones
until they have had sufcient time to cool.
Likewise, never allow clothing or ammable
materials to come in contact with cooking
zones or cooktop surfaces until they have
had sufcient time to cool. Other surfaces
of the appliance may become hot enough to
cause burns.
Use proper pan size.
This appliance is equipped with one or more
surface units of different size. Select pans
having at bottoms large enough to cover
the cooking zone. Proper relationship of
pan size to cooking zone will improve
efciency.
Never Leave Surface Units Unattended
at High Heat Settings.
Boilover causes smoking and greasy
spillovers that may ignite.
Glazed cooking pans will not work with
induction cooktops.
DO NOT USE ALUMINUM FOIL ON THE
SURFACE OF THE COOKTOP.
Pan Handles Should be Turned Inward
and Not Extend Over Adjacent Surface
Units.
To reduce the risk of burns, ignition of
ammable materials, and spillage due to
unintentional contact with the pan, the
handle of a pan should be positioned so that
it is turned inward, and does not extend over
adjacent surface units.
Cookware should always be dry.
Do not heat cookware with excess water
droplets on the outside of the pan. The
droplets may begin to boil and splatter.
NEVER HEAT AN EMPTY PAN.
It may damage the cooktop or cookware and
overheat the unit.
4
IMPORTANT SAFETY INSTRUCTIONS

5
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
If the glass is cracked, switch off the
appliance to avoid the possibility of electric
shock.
Metallic objects such as knives, forks, spoons
and lids should not be placed on the cooktop/
hob surface since they can get hot.
This appliance is not intended for use
by persons (including children) with
reduced physical sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
The appliance is not intended to be
operated by means of an external timer
or separate remote-control system.
Danger of re: Do not store items on the
cooking surfaces.
CAUTION:
The cooking process has to be supervised.
A short term cooking process has to be
supervised continuously.
WARNING:
Unattended cooking on a cooktop/hob with
fat or oil can be dangerous and may result in
a re.
If the power supply cord is damaged, it
must be replaced by the manufacturer, its
service agent or similarly qualied persons
in order to avoid a hazard.
DO NOT DISCARD THESE INSTRUCTIONS, KEEP
THEM WITH THE KENYON COOKTOP FOR FUTURE REFERENCE.

Product Specications
6
ELECTRICAL SUPPLY REQUIREMENTS
WARNING!
If the electrical supply does not meet the product specications, consult
with a licensed electrician before proceeding with installation!
KENYON
PART NUMBER
MAX CONNECTED
LOAD
POWER SUPPLY
INPUT
MINIMUM WIRE
SIZE
B80401 7000 Watts 240V AC 30A 50/60Hz #10 AWG
B80405 7000 Watts 240V AC 30A 50/60Hz #10 AWG
B80301 3500 Watts 240V AC 15A 50/60Hz #14 AWG
B80305 3500 Watts 240V AC 15A 50/60Hz #14 AWG
B80321 1750 Watts 120V AC 20A 50/60Hz 3 wire molded plug,
NEMA 5-20

Product Specications
7
Model # Size
Wattage
(normal /
boost mode*)
Size
Wattage
(normal /
boost mode*)
Size
Wattage
(normal /
boost mode*)
Size
Wattage
(normal /
boost mode*)
Max
Combined
Wattage
B80401
(240V)
6.75”
(171mm)
1400 / 2200 8”
(203mm)
1850 / 3000 8”
(203mm)
1850 / 3000 9”
(228mm)
2300 / 3500 7000 Watts
B80405
(240V)
5.75”
(146mm)
1400 / 2200 7”
(178mm)
1850 / 3000 7”
(178mm)
1850 / 3000 8.25”
(210mm)
2300 / 3500 7000 Watts
B80301
(240V)
8”
(203mm)
1850 / 3000 8”
(203mm)
1850 / 3000
N/A N/A N/A N/A
3500 Watts
B80305
(240V)
8”
(203mm)
1850 / 3000 8”
(203mm)
1850 / 3000
N/A N/A N/A N/A
3500 Watts
B80321
(120V)
6.25”
(160mm)
1100 / 1500 6.25”
(160mm)
1100 / 1500
N/A N/A N/A N/A
1750 Watts
BURNER 1 BURNER 2 BURNER 3 BURNER 4
BURNER SPECIFICATIONS
Model # Width Depth Height Width Depth Radius
B80401
(240V)
30”
762mm
21.25”
540mm
2.93”
74mm
29”
737mm
20.25”
514mm
.25”
6.35mm
B80405
(240V)
24”
610mm
21.75”
552mm
2.93”
74mm
23”
584mm
20.25”
514mm
.25”
6.35mm
B80301
(240V)
12”
305mm
21”
533mm
2.93”
74mm
10.75”
273mm
20”
508mm
.25”
6.35mm
B80305
(240V)
23.25”
591mm
14.25”
362mm
2.93”
74mm
21.75”
552mm
12.75”
324mm
.25”
6.35mm
B80321
(120V)
12”
305mm
21”
533mm
3.3”
84mm
11.25”
286mm
19.25”
489mm
.25”
6.35mm
PRODUCT DIMENSIONS CUTOUT DIMENSIONS
PRODUCT DIMENSIONS
*See details about boost mode on page 15

8
Product Specications
Four Burner 30 Inch Model
29.00in
737mm
20.25in
514mm
2.03in
[52mm]
2.93in [74mm] WITH POWER CORD
30.00in
762mm
21.25in
540mm
D
C
B
A
B
C
D
1 2 3
4 5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
245413
SHEET 1 OF 1
BRIDGE INDUCTION, 4B,
240V
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5
WEIGHT:
REV
DWG. NO.
C
SIZE
TITLE:
KENYON INTERNATIONAL
8 HERITAGE PARK - PO BOX 925
CLINTON, CT 06413
NAME
DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER
ANSI/ASME Y14.5M-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH
0.50
BEND
1.00
TWO PLACE DECIMAL .010"
THREE PLACE DECIMAL
.005"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
KENYON INTERNATIONAL. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
KENYON INTERNATIONAL IS PROHIBITED.
A
DO NOT SCALE DRAWING
Four Burner 24 Inch Model
24.00in
610mm
21.75in
552mm
20.25in
514mm
23.00in
584mm
2.03in
[52mm]
2.93in [74mm] WITH POWER CORD
D
C
B
A
B
C
D
1 2 3
4 5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
245349
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:5
WEIGHT:
REV
DWG. NO.
C
SIZE
TITLE:
KENYON INTERNATIONAL
8 HERITAGE PARK - PO BOX 925
CLINTON, CT 06413
NAME
DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER
ANSI/ASME Y14.5M-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH
0.50
BEND
1.00
TWO PLACE DECIMAL .010"
THREE PLACE DECIMAL
.005"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
KENYON INTERNATIONAL. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
KENYON INTERNATIONAL IS PROHIBITED.
A
DO NOT SCALE DRAWING

Product Specications
9
Two Burner Portrait (240V) Model Two Burner Landscape (240V) Model
Two Burner Portrait (120V) Model

Since cookware plays an important role in
cooking efciency and convenience, keep in
mind the following information when selecting
your cookware.
Avoid pans with shaped and rounded bottoms
as this inhibits the pan or pot in cooking
evenly. The best quality pans and pots to use
are the multi-ply stainless steel type. Kenyon
sells such pots and pans called StacKEN™.
They come with a lifetime guarantee and are
made in the USA. These pans and pots work
exceptionally well on induction cooktops as
well as radiant glass top stoves.
Use cookware of the correct diameter only.
The base of the pot or pan should be about
the same size as the cooking zone on which it
is used – not much wider and not much
smaller. By using utensils with the correct
diameter, you should achieve maximum
heating efciency with the shortest possible
cooking time.
Be certain that both the cooktop glass
panel and the bottom of your pots and pans
are clean and dry before use. By doing so, you
will help prevent scratches and stains on your
cooktop glass panel.
Cleaning and Care
Cleaning the Cooktop
The cooking surface and control areas of
your ceramic glass cooktop are identied by
permanent patterns in the cooktop. The
appliance is easy to maintain and clean.
Keep the cooktop in top performance by
following these simple guidelines for use
and cleaning.
Clean the cooktop before you use it for the
rst time. A thorough cleaning with a
recommended cooktop cleaner (Cerama
Bryte Ceramic Cooktop Cleaner). A sample
is included with your Kenyon cooktop.
Always remove food spills, grease spatters
and metal rub-off from cookware. A razor blade
scraper or the equivalent works well to remove
spillovers.
When the cooktop is cool, clean it with a paper
towel or a clean, soft cloth and Cerama Bryte
Ceramic Cooktop Cleaner. After cleaning,
always wipe the cooktop with a clean, damp
cloth to avoid cooked-on cleaner residue, then
wipe the cooktop dry.
Do not use a dish towel or sponge to wipe off the
cooktop. A lm may be left by the detergent and
may cause discoloration of the cooktop surface.
Avoid abrasive scouring cleaners of any kind.
Also avoid using plastic, nylon or metal cleaning
pads. They may scratch or melt onto the
cooktop.
Avoid chemical cleaners such as chlorine
bleach, ammonia, hydrouoric acid or
chemical oven cleaners. They can etch or
discolor the surface.
Do not let anything that melts - plastic,
aluminum foil, sugar, etc. come into contact
with the cooktop surface when it is hot. Should
something melt onto the surface, immediately
move it to a cool area of the cooktop with a
razor blade scraper and then remove it from
the cooktop as soon as possible. If they are
allowed to harden the cooktop may become
pitted.
Use Good Quality
Cookware
10
NOTE:
To prevent accidental activation of the
touch controls, it is recommended that
you enable the LOCK MODE feature
before cleaning.

There are a series of lights that provide
indications of cooking zone operation and hot
surfaces.
These lights are located adjacent to the control
panels. When the control is ON, a LED light
will illuminate indicating which cooking zone is
on.
For your safety, we have incorporated a “HOT”
indicator light. When lit, this light indicates that
some part of the ceramic glass on the cooktop
is too warm to touch or place articles upon.
Do not place articles other than cookware on
the cooking surface while this light is glowing.
After turning off the cooking zone, the “HOT”
indicator light will remain illuminated until the
cooking zone is safe to touch.
How Induction Cooking
Works
Induction is the most energy efcient method
of cooking. The electromagnetic eld under
the ceramic glass top excites the atoms in the
ferrous metal cookware directly above,
immediately producing heat saving time and
energy.
The Bridge induction cooktop will heat up 25%
to 50% faster and distribute heat more evenly
than radiant cooktops, and offers immediate
temperature adjustment.
11
READ SAFETY INSTRUCTIONS BEFORE
OPERATING YOUR APPLIANCE
Operation
Cookware Noise
Some noise may occur from cookware when
using the cooktop. It may vary according to
cookware construction and power level.
In addition, the noise may vary according to
the use of adjacent cooking zone. Possible
noises include a low humming sound or
whistle. A cookware piece that completely
covers the cooking zone will produce less
noise.
These noises may be reduced or eliminated by
lowering or raising the power level setting on
one or both cooking zones or by using
different cookware. Using StacKEN™
cookware is the quietest cookware for the
Bridge induction cooktop.
Indicator Lights
Available Power
The cooktop has a limited total power
available. To ensure that the induction
cooktop power usage does not exceed the
maximum combined wattage limit for safe
operation, the power of the previously set
cooking zone will automatically decrease when
another cooking zone is activated and set to
use an amount of power that may amount to
the maximum load.

Operation
12
Turning On
Touch the controls rmly with the at part of
your ngertips. With the unit unlocked, touch
the Main Power button. If a cooking zone is
not activated within 10 seconds, the cooktop
will de-power by itself.
Operating the Cooking
Zone(s)
Position a cookware piece and touch and hold
the Cooking Zone Power button for 1
second in the cooking zone control area for
the selected cooking zone. Slide your nger
on the Heating Level Control Sweep to the
right to increase the cooking level or slide your
nger to the left to decrease it. The power
level indicator visually indicates the power
selected along with the numeric value in the
power level display.
Automatic Zone Power-Off
If a cooking zone is active but it does not
detect a pan for more than 10 seconds, it will
shut off.
Power Levels
The power level of the cooking zone can be
set from Lo and level 1 to level 9. An
additional level (Boost mode) is available for
very rapid heating of food.
Turning Off
A single cooking zone can be turned off
directly by touching the Cooking Zone
Power in the Cooking Zone Control Area for
the cooking zone that is working. You can turn
off all cooking zones immediately at any time
using the Main Power button.
HOT LIGHT
COOKING ZONE POWER
COOKING ZONE CONTROL AREA
HEATING LEVEL CONTROL SWEEP
MAIN POWER
POWER LIGHT
HOT HOT

Operation
13
Bridge Mode
This mode facilitates cooking with elongated
cookware, and allows the two cooking zones
to work together as one. When the Bridge
mode is active, the following symbols will be
displayed in the Cooking Zone Control Area:
TWO BURNER MODEL INSTRUCTIONS:
Activate Bridge Mode
1. Turn the Main Power ON.
2. Simultaneously touch and hold anywhere
on both Heating Level Control Sweeps until
you see the bridge symbol displayed.
3. Touch the power button on the left cooking
zone.
4. Adjust setting to desired level using the left
Heating Level Control Sweep.
Deactivate Bridge Mode by simultaneously
touching and holding anywhere on both
Heating Level Control Sweeps.
Boost Mode is not available when the cooking
zones are actively bridged.
FOUR BURNER MODEL INSTRUCTIONS:
The two right side (zone 3 & 4) cooking
zones feature Bridge Mode.
Activate Bridge Mode
1. Turn the Main Power ON.
2. Simultaneously touch and hold anywhere
on the two right side Heating Level Control
Sweeps (zone 3 & 4) until you see the bridge
symbol displayed.
3. Touch the power button for zone 3.
4. Adjust setting to desired level using the
zone 3 Heating Level Control Sweep.
Deactivate Bridge Mode by simultaneously
touching and holding anywhere on the two
right side Heating Level Control Sweeps
(zone 3 & 4).
Boost Mode is not available when the cooking
zones are actively bridged.
BRIDGE ZONES
ZONE 1 CONTROLS
ZONE 2 CONTROLS ZONE 3 CONTROLS
ZONE 4 CONTROLS
ZONE 1
ZONE 2
ZONE 3
ZONE 4

Boost Mode
Boost Mode makes additional power available
to each cooking zone (for example, you want
to bring a large volume of water to a boil). The
power of a cooking zone can be increased or
“boosted” for up to 10 minutes.
When Boost is active, the display of the
boosted cooking zone will show:
Activate Boost by sliding your nger right to
the end of the Heating Level Control Sweep
of the cooking zone.
Deactivate Boost by sliding left on the
Heating Level Control Sweep to lower the
temperature setting of the cooking zone.
Operation
14
Simmer Mode
This function allows for gentle cooking even
for the most delicate of sauces and chocolate.
Activate Simmer by pressing and holding the
“LO” setting on the Heating Level
Control Sweep of the cooking zone. This will
rst activate “low” mode, continue holding the
“LO” button as this will activate the “simmer”
mode indicated by the SIM light.
When simmer or low mode are active, the
following symbols will be displayed in the
Cooking Zone Control Area:
Deactivate Simmer by switching to a higher
level, lift and touch the Heating Level Control
Sweep to the right until the desired level is
displayed.
These temperatures are approximate and are
greatly dependent on the cookware and the
quantity of food.
NOTE: Simmer mode is not applicable to 120V
models. The simmer mode operates for a max-
imum of 2 hours.
LOW (48˚C, 118˚F) Melting Chocolate or butter
SIM (70˚C, 158˚F) Simmering

Operation
Cookware Detection
The cooktop will only apply power to a
cooking zone where cookware is detected.
In the event that no cookware is identied a
“missing pot” error will be displayed on the
Cooking Zone Control Area. Below is the error
that will be displayed:
SETTING USES
1 - 2 Melt chocolate or butter.
Heating delicate sauces.
Warming food.
2 - 3 Simmer sauces.
Steaming rice.
Melting large quantities.
3 - 5 Range of simmer levels for
simmering with or without
lid.
4 - 5 Maintain a slow boil.
Stew or steam food.
5 - 6 Fry or sauté foods.
Cook soups, sauces and
gravies.
6 - 7 Hold a rapid boil.
7 - 8 Brown or sear food.
9 Start food cooking, boiling,
frying and roasting.
b (Boost) Bringing liquid to a boil,
frying and roasting.
Temperature Setting Guide
SETTING OPERATION TIME
LIMIT (MIN)
LOW 120
SIM 120
1 516
2 402
3 318
4 258
5 210
6 138
7138
8 108
9 90
b (Boost) 10
Operation Time Limitation
15

Operation
16
Safety Lock Mode
You can lock the entire cooktop at any time
during use or when the unit is powered off but
you must rst turn the cooktop ON in order to
use the lock. Locking the cooktop prevents
unwanted cooktop operation.
To Lock the cooktop touch the lock graphic.
An audible beep will be heard and the light
above the lock graphic will illuminate. The
cooktop is now locked.
To Unlock the cooktop touch the lock
graphic. An audible beep will be heard and
the light above the lock graphic will go out.
The cooktop is now unlocked and all functions
operate.
NOTE: When the cooktop is locked and the
cooking zones are ON, the heat settings can-
not be raised. Only the OFF function for both
cooking zones and Main Power will still work
for safety reasons.
POWER LIGHT LOCK LIGHT
INDICATES LOCKED UNIT
LOCK FEATURE
MAIN POWER
D
C
B
A
B
C
D
1 2 3
4 5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
BRIDGE INDUCTION, 2B LARGE, LANDSCAPE WITH COUNTERTOP
SHEET 1 OF 4
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
WEIGHT:
REV
DWG. NO.
C
SIZE
TITLE:
KENYON INTERNATIONAL
8 HERITAGE PARK - PO BOX 925
CLINTON, CT 06413
NAME
DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER
ANSI/ASME Y14.5M-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH
0.50
BEND
1.00
TWO PLACE DECIMAL .010"
THREE PLACE DECIMAL
.005"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
KENYON INTERNATIONAL. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
KENYON INTERNATIONAL IS PROHIBITED.
A
DO NOT SCALE DRAWING
Child Lock
You can use the Child Lock to safeguard
against a child unintentionally turning on a
cooking zone and activating the cooktop
surface. Also, the control panel, with
exception of the Main Power button.
To Turn On the Child Lock simultaneously
touch and hold the lock and clock graphic. An
audible beep will be heard and the cooktop
will be locked. An “L” will be displayed in the
both Cooking Zone Control Areas and in the
Timer Display.
To Turn Off the Child Lock simultaneously
touch and hold the lock and clock graphic. An
audible beep will be heard and the cooktop will
be unlocked.

Operation
Timer Options
Kitchen Timer
This is a general timer that has many uses
around the kitchen, independent of cooking
activity on the induction cooktop. The timer
can be set for periods of up to 1 hour 59
minutes.
Activate the Kitchen Timer by touching the
clock graphic. Set the desired time duration
by touching the + or - buttons, holding the
button to increase or decrease the setting. A
beep will sound at the start of the setting and
the set time will display in the timer display
box. The time increments will run from 1-10
minutes in 1 minute increments, and then
change to 5 minute increments up to the next
full hour, from there on, it’s in increments of 10
minutes. The time reading will speed up as the
touch is held. The timer automatically starts a
few seconds after you adjust the time. A clock
will appear between the + or - buttons
indicating the kitchen timer has been set.
Cancel the Kitchen Timer by pressing the
clock graphic, then dial down to zero.
Change the Kitchen Timer by pressing the
clock graphic then the + or – buttons to adjust
to the desired time.
NOTE: The kitchen timer does not control the
cooking zones. If no time is set, the timer will
deactivate after 5 seconds. When the time
has elapsed the Kitchen Timer will beep for 2
minutes then shut off. Touch the clock graphic
to stop the alarm.
17
KITCHEN AND
COOKING TIMER
TIMER + AND - BUTTONS
TIMER DISPLAY
D
C
B
A
B
C
D
1 2 3
4 5
6
7
8
8
7
6
5
4
3
2
1
E
F
E
F
BRIDGE INDUCTION, 2B LARGE, LANDSCAPE WITH COUNTERTOP
SHEET 3 OF 4
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:2
WEIGHT:
REV
DWG. NO.
C
SIZE
TITLE:
KENYON INTERNATIONAL
8 HERITAGE PARK - PO BOX 925
CLINTON, CT 06413
NAME
DATE
COMMENTS:
Q.A.
MFG APPR.
ENG APPR.
CHECKED
DRAWN
FINISH
MATERIAL
INTERPRET GEOMETRIC
TOLERANCING PER
ANSI/ASME Y14.5M-2009
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH
0.50
BEND
1.00
TWO PLACE DECIMAL .010"
THREE PLACE DECIMAL
.005"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
KENYON INTERNATIONAL. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
KENYON INTERNATIONAL IS PROHIBITED.
A
DO NOT SCALE DRAWING

Cooking Timer
You can use the timer function to set a cook
time for any cooking zone. The cooking zone
will lower to power level 1 once the set time
has elapsed. The timer can be set for periods
of up to 1 hour 59 minutes.
Activate the Cooking Timer by rst
selecting the desired cooking zone and power
level. Touch the clock graphic and then set
the desired time duration by touching the +
or - buttons, holding the button to increase or
decrease the setting. A beep will sound at the
start of the setting and the set time will display
in the timer display box. The time increments
will run from 1-10 minutes in 1 minute
increments, and then change to 5 minute
increments up to the next full hour, from there
on, it’s in increments of 10 minutes. The time
reading will speed up as the touch is held. The
timer automatically starts a few seconds after
you adjust the time. A clock will appear next
to the power level in the cooking zone control
area indicating the timer has been set.
Cancel the Cooking Timer by pressing the
clock graphic, then dial down to zero.
Change the Cooking Timer by pressing the
clock graphic then the + or – buttons to adjust
to the desired time.
Operation
18
Cancel the Cooking Timer by pressing the
clock graphic, then dial down to zero.
Change the Cooking Timer by pressing the
clock graphic then the + or – buttons to adjust
to the desired time.
NOTE: All three timers are viewed and
controlled by the Timer Display and Clock
graphic. Press the Clock graphic to advance
through each set timer. A clock indicator will
display in the Cooking Zone Control Area next
to the power level for each cooking zone.
When the clock indicator light appears
between the + or - buttons the Kitchen Timer is
being controlled.
Silicone Mat
The patented silicone mat covers the entire
cooking area and provides spill and pot
retention, glass top protection, quick heat
dissipation and easy cleanup. Made from a
unique textile core and food grade silicone
wrap. Simply throw the mat in the dishwasher
or sink for easy clean up after cooking.

Operation
Error Code Readout
ERROR CODE DESCRIPTION ACTION TO REMEDY ERROR
Too many control functions
activated at the same time
Water or cooking utensils on the
glass; Clean the glass
ER20 Internal Error Contact customer support
ER21 Over temperature Let cooktop cool down
ER22 Internal Error Contact customer support
ER31 Internal Error Contact customer support
ER36 Internal Error Contact customer support
ER40 Power supply voltage too low Ensure that the electrical
hookup voltage to the unit is
correct.
ER47 Internal Error Contact customer support
EA Internal Error Contact customer support
U400 Over voltage Ensure that the electrical
hookup voltage to the unit is
correct.
E2 Cooking zone over temperature Allow cooking zone to cool down
E3 Inapplicable Pot Use suitable pot
E4 Internal Error Contact customer support
E5, E6 Internal Error Contact customer support
E7 Internal Error Contact customer support
E8 Internal Error Contact customer support
E9 Internal Error Contact customer support
TROUBLESHOOTING INDEX
In the event that the Bridge induction cooktop
is not operating correctly, the Cooking Zone
Control Area will display an error code that will
identify the problem. If an error code is shown
in the Cooking Zone Control Area, identify the
code in the Troubleshooting Index below and
take action as noted.
De-power and restart the unit to clear the
display. Allow the unit to cool as necessary.
Lock out the main power supply to the unit by
turning off the breaker before performing any
wiring operations. If the problem persists,
please call Kenyon Customer Care at
860-664-4906, M-F, 8AM – 5PM EST or email
at [email protected].
19
The Kenyon Bridge Induction Cooktop is a sealed unit that does not require regular
maintenance. Please follow our operating instructions as mentioned above. If your cooktop
requires service, this must be preformed by Authorized Personnel only.
Please call Kenyon Customer Care at 860-664-4906.
BRIDGE INDUCTION COOKTOP MAINTENANCE

Installation
Unpacking the Cooktop
1Carefully unpack the cooktop from its
shipping container. If possible, retain the
original shipping carton and protective
packaging in the event the unit ever has to
be returned for service.
Verify and identify the package contents.
The following items should be included in the
carton. If any components are missing or
damaged, call KENYON immediately.
20
IMPORTANT!
Do not remove the clear plastic
covering lm on the ceramic glass
until cooktop is ready to be used.
2This product must be installed in accordance
with national, state and local electric codes.
The table on page 6 provides the correct
voltage, amperage and frequency that must be
supplied to the cooktop.
The supply must be from an individually
grounded circuit that is protected by a circuit
breaker and rated per the specications for the
various models as shown in the table on
page 6.
IMPORTANT!
Save this document for future
reference. This appliance must
be properly installed and
grounded by a qualied
technician. Check the Electrical Supply
Requirements
(2) Mounting brackets (1) Package of
mounting screws
PARTS INCLUDED
Bridge Induction
Cooktop
(1) Ceramic
cooktop cleaner