Kettal Molo User manual

1
Assembly Guide
Molo
Seat and Cover Removing

Kettal Assembly Guide
2
Molo
Sofa
1.1 Raise the seat holiding from the front part
underneath, push up until it can be removed.
1.2 Once seat is removed, open the zipper and remove the cover.
Zipper
Seat Front
1. Remove seat cover

3
2.1 Put cover back on and place the seat in the right position. Always
respecting front of seat.
Designer
Rodolfo Dordoni
Collection
Molo
Seat and Cover
Removing
22/06/2021
Rear fixing
Front fixing
2. Seat placement
Place fixing inside profiles to
guide the seat

Kettal Assembly Guide
4
Molo
Sofa
2.2 Press down and push against the backrest until it clicks.
Click!

5
Designer
Rodolfo Dordoni
Collection
Molo
Seat and Cover
Removing
22/06/2021
3.1
3.2
To remove backrest and armrest cover, first you must remove the seat.
Pull out to remove the guide underneath. Velcro is just positioned in the outer part of
sofa.
3. Remove backrest & armrest
cover

Kettal Assembly Guide
6
Molo
Sofa
Outside Inside
3.3 3.4

7
Designer
Rodolfo Dordoni
Collection
Molo
Seat and Cover
Removing
22/06/2021
3.5
3.6
Insert your finger through the guide and slide it to both sides to finish removing it.
Remove cover pulling upwards.

Kettal Assembly Guide
8
4. Place backrest & armrest cover
Molo
Sofa
4.1
4.2
2.1 2.2 2.3
Introduce the cover pulling downwards
Insert the end of the sleeve into the guide

9
Designer
Rodolfo Dordoni
Collection
Molo
Place Backrest and
Armrest Cover
22/06/2021
4.3 Pull the guide to flatten and fully fit.

Kettal Assembly Guide
10
Molo
Sofa
4.4 Finally, place the seat cushion.
Click!