Kettal Phone Booth User manual

Phone Booth
Assembly Manual

I
Phone Booth Assembly Manual
Oct 2022 / Revision 0
Index
Safety information________________________________________________________________________________ 1
Presentation______________________________________________________________________________________3
Unpacked ________________________________________________________________________________________4
Components _____________________________________________________________________________________5
Screws ___________________________________________________________________________________________7
Assembly_________________________________________________________________________________________8

IIOct 2022 / Revision 0
Kettal
Designer: Kettal Studio
Collection: Objetcs
Reference Description
Revision record
Revision 0 Initial version

III
Phone Booth Assembly Manual
Oct 2022 / Revision 0
Safety information
• This manual is part of the device. It must be kept intact and within easy reach
throughout the life of the appliance.
• It is necessary to carefully read this manual and all its indications before
assembling the device.
• This recommendations applies also to the appliance and component manuals.
• Do not perform any other task than the given in this user manual.
• Before getting started, make sure all parts are included, please don't forget
review and count each part.
• Prepare all to necessary tools and parts.
• Don’t force all fittings.
• The assembly of the Phone Booth must be performed by qualified personnel,
following the rules and regulations of the destination country.
• Do not perform any modification on the device.
• Two people may be needed to hold parts in place while tightening and
assembling.
• The installation requires an electrical connection. The client must provide these
services.
• The appliance has been manufactured for the following function: the booth
is a private area with light components to assembly; any other use should be
considered improper.
• The manufacturer declines all responsibility for uses other than those indicated.
• This appliance meets the requirements established by the EEC directives
currently in force.
• The desk surfaces and door must be operated gently to avoid injuries.
• The worktop surfaces may produce shear injuries.
• Pay special attention when children near the Phone Booth.
• Don't supplu electric energy until finish all connection.
• This device complies with the european directive 2002/96/CE regarding electric
and electronic equipment (Waste Electrical and Electronic Equipment - WEEE).
This directive defines the rules to the collection and recycling of the devices'
waste valid throughout the European Union.
• The illustrations given in this manual are merely informative and have no
contractual validity.

IVOct 2022 / Revision 0
Kettal
EN (European Standard): This appliance can be
used by children aged from 8 years and above
and persons with reduced physical, sensory or
mental capabilities or lack of experience and
knowledge they have been given supervision or
instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
IEC (International Electrotechnical Commission):
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should be
supervised to ensure that they do not play with
the appliance. The CE plate must remain legible
throughout the life of the device and must
never be removed.
Safety information
Label Description Location
CE plate Rear end of the device
The Phone Booth has an IPx4
waterproof protection when
not covered.
CE plate
The Phone Booth has an
IPx6 waterproof protection
when covered with the
cover specified by Kettal
(5780000600).
CE plate
Read the user manual CE plate
Ground connection CE plate
Waste Electrical and
Electronic Equipment Directive
(WEEE)
CE plate

V
Phone Booth Assembly Manual
Oct 2022 / Revision 0
Presentation
This manual makes a walkthrough around the
Phone Booth components and their basic how-
to-install.
All of this always keeping in mind the safety of
the user, those around it and the Phone Booth
itself.

1
Phone Booth Assembly Manual
Oct 2022 / Revision 0
Unpacking
2650 mm
1100 mm
1425 mm
400kg

2Oct 2022 / Revision 0
Kettal
Components

3
Phone Booth Assembly Manual
Oct 2022 / Revision 0
Components

4Oct 2022 / Revision 0
Kettal
DIN 914 M10x50
(x16)
DIN 913 M8x20
(x8)
ISO 7380 M6x50
(x5)
Screws
DIN 914 M6x12
(x8) DIN 9021 M6
(X3)
DIN 7380 M6x45
(X3)

5
Phone Booth Assembly Manual
Oct 2022 / Revision 0
Assembly
DIN 914 M10x50 (x8)
1
Tighten the bolts by hand.
ISO 7380 M6x12 (x4)

6Oct 2022 / Revision 0
Kettal
2
DIN 914 M10x50 (x8)
ISO 7380 M6x12 (x4)
Tighten the bolts by hand.

7
Phone Booth Assembly Manual
Oct 2022 / Revision 0
3
DIN 913 M8x20 (x4)
DIN 913 M8x20 (x4)
Tighten the bolts by hand.

8Oct 2022 / Revision 0
Kettal
4
Tighten all the bolts to their
corresponding tightening torque.
90º
90º

9
Phone Booth Assembly Manual
Oct 2022 / Revision 0
5
Click &
Go!(x10)

10Oct 2022 / Revision 0
Kettal
6
Click &
Go!(x10)

11
Phone Booth Assembly Manual
Oct 2022 / Revision 0
7
Click &
Go!(x10)

12Oct 2022 / Revision 0
Kettal
NOTE: PULL VERY SOLWLY NOTE: DO NOT PULL AT AN ANGLE
LENS SECTIONS
SHOWN IN WHITE
ARE MASKED
WITH LABELS
LENS SECTIONS
SHOWN IN GRAY HAVE
NOT BEEN MASKED LENS MASK
HALLWAY FALLS
WITHIN SENSOR’S
COVERAGE AREA
8

13
Phone Booth Assembly Manual
Oct 2022 / Revision 0
ISO 7380 M6x12 (x5)
9

14Oct 2022 / Revision 0
Kettal
10