Keurig Bean to Cup User manual

Let's Get
Back to Business
Urnex Complete Café
Urnex  Rinza Liquid
Urnex  Tabz Z61
Urnex SuperGrindz
Empty Spray Bottle
Equipment Sanitizer
The Keurig® Bean to Cup
Deep Cleaning Kit is designed
to service three bean to cup
coffee makers
Included in your kit:
When cleaning...
Wash your hands with soap
Wear disposable glovesif
Increase ventilation by
Disinfect high-touch surfaces
regularly
and water for 20 seconds before
and after cleaning
they are available
opening windows or adjusting
air conditioning
SOURCE: CDC.GOV
For the full Use and Care Guide for
your coffee maker, please visit:
commercial.keurig.com
On a weekly basis, clean and
sanitize your Keurig® bean to cup
coffee maker using Urnex®
Complete Café Sanitizer and
Urnex® Rinza Liquid
At least weekly, spray exterior
parts of your coffee maker with the
prepared sanitizing solution. Once a
month, use Urnex® Tabz Z61 and
once every six months, use
Urnex® SuperGrindz
®
®
®
®
NOTE: This kit is designed to service three bean to cup coffee makers for one
month, but it may also be used to service one bean to cup coffee maker for
three months
You will also need a bucket for
preparing each solution, as well as
a lint-free, non-abrasive cloth

Follow the instructions below to clean and sanitize
your Keurig® Bean to Cup Coffee Maker
First, clean your coffee maker
to remove physical debris
and coffee soil
Then, sanitize your
coffee maker to kill viruses,
germs, and bacteria
Still need help?
Give us a call at 1-888-287-2739, option 5
1. Remove all removable parts
2. Prepare cleaning solution by adding 8 oz
(240 ml) of Urnex Rinza Liquid to 1 gallon
(3.7 L) of warm tap water (or equivalent
dilution)
3. Mix well and use immediately
4. Soak removed parts for 30 minutes in solution
5. Empty bucket and set aside parts to prepare
sanitizing solution per the instructions to the
right. If sanitizing procedure will not be
performed, rinse well under clean running
water and allow parts to drain and dry
completely
Cleaning Instructions
Enter the service menu to access the
maintenance mode
For Tabz Z61, select "brewer cleaning". For
SuperGrindz, select "grinder cleaning"
Follow prompts on screen to complete
cleaning process
1.
2.
3.
NOTE: For non-removable parts, add cleaning solution to a
soft cloth and use it to coat appliance parts. Then let sit for
30 minutes prior to wiping down with sanitizer solution. No
need to rinse
Urnex Tabz Z61/SuperGrindz
Sanitizing Instructions
1. Prepare sanitizing solution by adding 0.5 oz
(15 ml) of Urnex Complete Café Equipment
Sanitizer to 1 gallon (3.7 L) of warm tap
water (or equivalent dilution)
2. Mix well and use immediately
3. Soak removed parts for 1 minute in solution
4. Remove parts from solution and allow to
drain and dry completely. Do NOT rinse
or apply water
1. Prepare sanitizing solution by adding 4 ml of
Urnex Complete Café Equipment Sanitizer
to 1 L of warm tap water (or equivalent
dilution) in a spray bottle
2. Spray exterior surface of appliance and allow
solution to remain on surface for 1 minute
3. Wipe away with clean cloth and allow to
fully air dry
Create a Sanitizing Spray:
NOTE: Parts must be cleaned prior to sanitizing
NOTE: If you choose to descale your coffee maker, please do so
before following the cleaning instructions below
®
®
®
NOTE: The cleaning instructions found on each product are a general recommendation from the manufacturer.
The instructions above should be used for Keurig coffee makers
®
®
For non- removable brewer parts and to use
on all parts in between sanitizing soaks
AW: AW0000000065 REV A
12-BEANKIT-INSRT 1