Kew Labs KPD10 User manual

1
Innovated in our Labs
Styled for your life.
KPD10

Safety Instructions ...............................................................3
Overview ...............................................................................4
Get Started ...........................................................................5
Specifications .......................................................................6
Recycling............................................................................... 6
Warranty ............................................................................... 7
Customer Service ................................................................ 7

3
• Never keep or use the unit in high temperature, moist
environments and never expose to direct sunlight. This
product is not a toy. Never leave the equipment within reach
of children. Close supervision is required when using this
equipment near children.
• Never disassemble or refit the unit.
• Never shock, hit or drop the unit.
• If any leakage goes into your eyes, never rub your eyes.
Clean your eyes with water or get medical help.
• The unit will get hotter during use, this is normal.
Never cover the unit with paper or other things.
Do not push any objects into openings as damage to the
equipment may occur.
• Never expose or dispose of in a fire.
• Do not use if it has been dropped or damaged in any way.
• Repairs to electrical equipment shall only be performed by
qualified personnel. Improper repairs may place the user at
serious risk.
• Do not use the product with wet hands.
Keep the unit out of reach from children, this product is not
a toy!
• Keep the unit free from dust, lint etc.
SAFETY INSTRUCTIONS
KPD10
USER MANUAL

4
OVERVIEW
Micro USB Input Port
Type C Input / Output Port
USB Output Port
Power Button
LED Power Indicator
Fast Charge Indicator (Type C cable only)

5
GET STARTED
1. Charge KPD10 by connecting Micro USB/Type C cable to
the adapter or computer.
2. Press the power button to start charging. The LED power
indicator will show the remaining power.
3. Disconnect product after devices are fully charged. Charge
the power bank every 3 month to maintain its best function.
Note: Charge with Type C cable and QC adaptor for faster
recharge.
Problem Solution
Power bank will
not power on
Charge the power bank and it will
work normally after 2-3 minutes.
Power bank will
not charge
Ensure that the charging cable is
properly connected to your mobile
device.

6
SPECIFICATIONS
RECYCLING
Product Name KPD10
Capacity 10000 mAh
Battery Li-polymer
Input Micro USB 5V-2.1A,
Type C, DC5V-3A
DC9V-2A, DC12V-1.5A
(18W PD3.0)
Output USB, Type-C, DC5V-3A,
DC9V-2A, DC12V-1.5A
(18W Max QC3.0/PD 3.0)
Included in the
packaging
Power Bank
USB to Type C cable
Dimension 135 x 69 x 11mm
Weight 240g
Recycling:
This product’s packaging materials are recyclable and can be
reused. This product and the accessories packed together are
the applicable product to the WEEE directive except batteries.
Please dispose of any materials in accordance with your local
recycling regulations. Batteries should never be thrown away
or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.

7
CUSTOMER SERVICE
WARRANTY
Please don’t hesitate to contact us at
[email protected] for any technical assistance,
warranty claim or just any feedback you may have
relating to this product. Otherwise please visit our website
www.kewlabstech.com for more FAQs and more product
news.
KEW LABS warrants to the purchaser that your product shall
be free from defects in material and workmanship for the
length of time, identified on your product package and/or
at www.kewlabstech.com under the warranty specification
for your product, from the date of purchase. This warranty is
non transferable and is limited to original purchaser and the
country it was purchased in.
This warranty does not cover problems or damage resulting
from: (1) accident, abuse, misapplication, or any unauthorized
repair, modification or disassembly; (2) improper operation or
maintenance, usage not in accordance with product
instructions or connection to improper voltage supply; (3)
use of non KEW LABS consumables, such as replacement
batteries, (4) lost parts that were originally supplied with by
KEW LABS; (5) normal wear and tear. This limited warranty
does not, under any circumstances, cover the replacement
of or reimbursement for any electronic device or personal
property that is not a KEW LABS product.

8