Kewtech KEW80L User manual
KEW80L
Bluetooth direct label printer
USER GUIDE
DETAIL LAYOUT
PRINTER STATUS OPERATION
Power On Press the power key for 3s
Power Off Press the power key 2 times
Function
Select
After starting the printer press and hold the power key for 5
seconds, then release. Further presses of the power key selects
the category. Pressing the paper feed key selects the sub-category.
DEVICE SPECIFICATION LABEL ROLL INSTALLATION BATTERY INSTALLATION CHARGING YOUR PRINTER
1. Press the cover release button to open the top cover.
2. Ensurethattheleft-handspacerisinplaceasshowninrstpicture.
3. Load the label roll against the left-hand spacer and with the labels facing
forwards.
4. The right-hand adjustable spacer needs to be set to keep the labels in
line.To release the adjustable spacer’s lock, pull the green lever forward
- second picture – do not use excessive force. With the spacer now
freetomove,slideittobeasnugtwiththeright-handsideofthe
labels. Now, push the green lever backwards until it clicks.
5. Pull one label out of the printer and then close the lid ensuring that it
snaps into its catch.
1. When installing or replacing a battery make sure that the printer is
switched off.
2.Toinstallabatteryforthersttime,removetheprotectiveadhesivestrip
over the battery terminals.
3. Insert the battery into the compartment in the rear of the printer by
placingtheedgeoppositethecatchinrst.Then,pushthecatchintoplace
until it snaps closed.
4. To remove a battery, ensure that the printer is turned off, then do the
reverse of point 3 above.
Your KEW80L is supplied with a power supply unit with the correct
technicalspecicationtochargeyourprinter’sbattery.Onlyusethis
power supply to charge the printer.
Only use the charging interface socket on the printer to charge the
battery. Putting power to the USB Socket will NOT charge the battery.
Important - Never leave the printer unattended while charging.
Print Mode Thermal Line Printing
Paper Width 58mm
Print Density 84 dot / line
Print Speed 50 - 90mm/s
Interface USB + Bluetooth
Resolution 203dpi
Roll Diameter 50mm
Paper Thickness 0.06-0.08mm
Print Command ESC / TSPL
Character Size 24*24 point
Input Buffer 256k bytes
Power Adapter Input AC 100-220V; Output DC9V / 1A
Lithium Battery 1200mAh/7/4V
Charging Time 4 hours
Bar Code Type UPC-A, UPC-E, JAN13 (EAN1), JAN8 (EAN8),
CODE39, CODE93, CODE128,QR CODE
Operating System Android, IOS, PC(Windows)
Working Environment Temperature 0°C ~ 50°C; humidity 20% ~ 85%
Storage Environment Temperature -20°C ~ 60°C; humidity 5% ~ 95%
Power Key
Paper Feed Key
Charging Port
USB Port
OLED Screen
Cover
Release Button
Hook
Battery Clip
Right-hand
adjustable
spacer
Left-hand
Spacer
KEW80L
Bluetooth direct label printer
USER GUIDE
DETAIL LAYOUT
PRINTER STATUS OPERATION
Power On Press the power key for 3s
Power Off Press the power key 2 times
Function
Select
After starting the printer press and hold the power key for 5
seconds, then release. Further presses of the power key selects
the category. Pressing the paper feed key selects the sub-category.
DEVICE SPECIFICATION LABEL ROLL INSTALLATION BATTERY INSTALLATION CHARGING YOUR PRINTER
1. Press the cover release button to open the top cover.
2. Ensurethattheleft-handspacerisinplaceasshowninrstpicture.
3. Load the label roll against the left-hand spacer and with the labels facing
forwards.
4. The right-hand adjustable spacer needs to be set to keep the labels in
line.To release the adjustable spacer’s lock, pull the green lever forward
- second picture – do not use excessive force. With the spacer now
freetomove,slideittobeasnugtwiththeright-handsideofthe
labels. Now, push the green lever backwards until it clicks.
5. Pull one label out of the printer and then close the lid ensuring that it
snaps into its catch.
1. When installing or replacing a battery make sure that the printer is
switched off.
2.Toinstallabatteryforthersttime,removetheprotectiveadhesivestrip
over the battery terminals.
3. Insert the battery into the compartment in the rear of the printer by
placingtheedgeoppositethecatchinrst.Then,pushthecatchintoplace
until it snaps closed.
4. To remove a battery, ensure that the printer is turned off, then do the
reverse of point 3 above.
Your KEW80L is supplied with a power supply unit with the correct
technicalspecicationtochargeyourprinter’sbattery.Onlyusethis
power supply to charge the printer.
Only use the charging interface socket on the printer to charge the
battery. Putting power to the USB Socket will NOT charge the battery.
Important - Never leave the printer unattended while charging.
Print Mode Thermal Line Printing
Paper Width 58mm
Print Density 84 dot / line
Print Speed 50 - 90mm/s
Interface USB + Bluetooth
Resolution 203dpi
Roll Diameter 50mm
Paper Thickness 0.06-0.08mm
Print Command ESC / TSPL
Character Size 24*24 point
Input Buffer 256k bytes
Power Adapter Input AC 100-220V; Output DC9V / 1A
Lithium Battery 1200mAh/7/4V
Charging Time 4 hours
Bar Code Type UPC-A, UPC-E, JAN13 (EAN1), JAN8 (EAN8),
CODE39, CODE93, CODE128,QR CODE
Operating System Android, IOS, PC(Windows)
Working Environment Temperature 0°C ~ 50°C; humidity 20% ~ 85%
Storage Environment Temperature -20°C ~ 60°C; humidity 5% ~ 95%
Power Key
Paper Feed Key
Charging Port
USB Port
OLED Screen
Cover
Release Button
Hook
Battery Clip
Right-hand
adjustable
spacer
Left-hand
Spacer
KEW80L
Bluetooth direct label printer
USER GUIDE
DETAIL LAYOUT
PRINTER STATUS OPERATION
Power On Press the power key for 3s
Power Off Press the power key 2 times
Function
Select
After starting the printer press and hold the power key for 5
seconds, then release. Further presses of the power key selects
the category. Pressing the paper feed key selects the sub-category.
DEVICE SPECIFICATION LABEL ROLL INSTALLATION BATTERY INSTALLATION CHARGING YOUR PRINTER
1. Press the cover release button to open the top cover.
2. Ensurethattheleft-handspacerisinplaceasshowninrstpicture.
3. Load the label roll against the left-hand spacer and with the labels facing
forwards.
4. The right-hand adjustable spacer needs to be set to keep the labels in
line.To release the adjustable spacer’s lock, pull the green lever forward
- second picture – do not use excessive force. With the spacer now
freetomove,slideittobeasnugtwiththeright-handsideofthe
labels. Now, push the green lever backwards until it clicks.
5. Pull one label out of the printer and then close the lid ensuring that it
snaps into its catch.
1. When installing or replacing a battery make sure that the printer is
switched off.
2.Toinstallabatteryforthersttime,removetheprotectiveadhesivestrip
over the battery terminals.
3. Insert the battery into the compartment in the rear of the printer by
placingtheedgeoppositethecatchinrst.Then,pushthecatchintoplace
until it snaps closed.
4. To remove a battery, ensure that the printer is turned off, then do the
reverse of point 3 above.
Your KEW80L is supplied with a power supply unit with the correct
technicalspecicationtochargeyourprinter’sbattery.Onlyusethis
power supply to charge the printer.
Only use the charging interface socket on the printer to charge the
battery. Putting power to the USB Socket will NOT charge the battery.
Important - Never leave the printer unattended while charging.
Print Mode Thermal Line Printing
Paper Width 58mm
Print Density 84 dot / line
Print Speed 50 - 90mm/s
Interface USB + Bluetooth
Resolution 203dpi
Roll Diameter 50mm
Paper Thickness 0.06-0.08mm
Print Command ESC / TSPL
Character Size 24*24 point
Input Buffer 256k bytes
Power Adapter Input AC 100-220V; Output DC9V / 1A
Lithium Battery 1200mAh/7/4V
Charging Time 4 hours
Bar Code Type UPC-A, UPC-E, JAN13 (EAN1), JAN8 (EAN8),
CODE39, CODE93, CODE128,QR CODE
Operating System Android, IOS, PC(Windows)
Working Environment Temperature 0°C ~ 50°C; humidity 20% ~ 85%
Storage Environment Temperature -20°C ~ 60°C; humidity 5% ~ 95%
Power Key
Paper Feed Key
Charging Port
USB Port
OLED Screen
Cover
Release Button
Hook
Battery Clip
Right-hand
adjustable
spacer
Left-hand
Spacer
KEW80L
Bluetooth direct label printer
USER GUIDE
DETAIL LAYOUT
PRINTER STATUS OPERATION
Power On Press the power key for 3s
Power Off Press the power key 2 times
Function
Select
After starting the printer press and hold the power key for 5
seconds, then release. Further presses of the power key selects
the category. Pressing the paper feed key selects the sub-category.
DEVICE SPECIFICATION LABEL ROLL INSTALLATION BATTERY INSTALLATION CHARGING YOUR PRINTER
1. Press the cover release button to open the top cover.
2. Ensurethattheleft-handspacerisinplaceasshowninrstpicture.
3. Load the label roll against the left-hand spacer and with the labels facing
forwards.
4. The right-hand adjustable spacer needs to be set to keep the labels in
line.To release the adjustable spacer’s lock, pull the green lever forward
- second picture – do not use excessive force. With the spacer now
freetomove,slideittobeasnugtwiththeright-handsideofthe
labels. Now, push the green lever backwards until it clicks.
5. Pull one label out of the printer and then close the lid ensuring that it
snaps into its catch.
1. When installing or replacing a battery make sure that the printer is
switched off.
2.Toinstallabatteryforthersttime,removetheprotectiveadhesivestrip
over the battery terminals.
3. Insert the battery into the compartment in the rear of the printer by
placingtheedgeoppositethecatchinrst.Then,pushthecatchintoplace
until it snaps closed.
4. To remove a battery, ensure that the printer is turned off, then do the
reverse of point 3 above.
Your KEW80L is supplied with a power supply unit with the correct
technicalspecicationtochargeyourprinter’sbattery.Onlyusethis
power supply to charge the printer.
Only use the charging interface socket on the printer to charge the
battery. Putting power to the USB Socket will NOT charge the battery.
Important - Never leave the printer unattended while charging.
Print Mode Thermal Line Printing
Paper Width 58mm
Print Density 84 dot / line
Print Speed 50 - 90mm/s
Interface USB + Bluetooth
Resolution 203dpi
Roll Diameter 50mm
Paper Thickness 0.06-0.08mm
Print Command ESC / TSPL
Character Size 24*24 point
Input Buffer 256k bytes
Power Adapter Input AC 100-220V; Output DC9V / 1A
Lithium Battery 1200mAh/7/4V
Charging Time 4 hours
Bar Code Type UPC-A, UPC-E, JAN13 (EAN1), JAN8 (EAN8),
CODE39, CODE93, CODE128,QR CODE
Operating System Android, IOS, PC(Windows)
Working Environment Temperature 0°C ~ 50°C; humidity 20% ~ 85%
Storage Environment Temperature -20°C ~ 60°C; humidity 5% ~ 95%
Power Key
Paper Feed Key
Charging Port
USB Port
OLED Screen
Cover
Release Button
Hook
Battery Clip
Right-hand
adjustable
spacer
Left-hand
Spacer
KEW80L
Bluetooth direct label printer
USER GUIDE
DETAIL LAYOUT
PRINTER STATUS OPERATION
Power On Press the power key for 3s
Power Off Press the power key 2 times
Function
Select
After starting the printer press and hold the power key for 5
seconds, then release. Further presses of the power key selects
the category. Pressing the paper feed key selects the sub-category.
DEVICE SPECIFICATION LABEL ROLL INSTALLATION BATTERY INSTALLATION CHARGING YOUR PRINTER
1. Press the cover release button to open the top cover.
2. Ensurethattheleft-handspacerisinplaceasshowninrstpicture.
3. Load the label roll against the left-hand spacer and with the labels facing
forwards.
4. The right-hand adjustable spacer needs to be set to keep the labels in
line.To release the adjustable spacer’s lock, pull the green lever forward
- second picture – do not use excessive force. With the spacer now
freetomove,slideittobeasnugtwiththeright-handsideofthe
labels. Now, push the green lever backwards until it clicks.
5. Pull one label out of the printer and then close the lid ensuring that it
snaps into its catch.
1. When installing or replacing a battery make sure that the printer is
switched off.
2.Toinstallabatteryforthersttime,removetheprotectiveadhesivestrip
over the battery terminals.
3. Insert the battery into the compartment in the rear of the printer by
placingtheedgeoppositethecatchinrst.Then,pushthecatchintoplace
until it snaps closed.
4. To remove a battery, ensure that the printer is turned off, then do the
reverse of point 3 above.
Your KEW80L is supplied with a power supply unit with the correct
technicalspecicationtochargeyourprinter’sbattery.Onlyusethis
power supply to charge the printer.
Only use the charging interface socket on the printer to charge the
battery. Putting power to the USB Socket will NOT charge the battery.
Important - Never leave the printer unattended while charging.
Print Mode Thermal Line Printing
Paper Width 58mm
Print Density 84 dot / line
Print Speed 50 - 90mm/s
Interface USB + Bluetooth
Resolution 203dpi
Roll Diameter 50mm
Paper Thickness 0.06-0.08mm
Print Command ESC / TSPL
Character Size 24*24 point
Input Buffer 256k bytes
Power Adapter Input AC 100-220V; Output DC9V / 1A
Lithium Battery 1200mAh/7/4V
Charging Time 4 hours
Bar Code Type UPC-A, UPC-E, JAN13 (EAN1), JAN8 (EAN8),
CODE39, CODE93, CODE128,QR CODE
Operating System Android, IOS, PC(Windows)
Working Environment Temperature 0°C ~ 50°C; humidity 20% ~ 85%
Storage Environment Temperature -20°C ~ 60°C; humidity 5% ~ 95%
Power Key
Paper Feed Key
Charging Port
USB Port
OLED Screen
Cover
Release Button
Hook
Battery Clip
Right-hand
adjustable
spacer
Left-hand
Spacer
KEW80L
Bluetooth direct label printer
USER GUIDE
DETAIL LAYOUT
PRINTER STATUS OPERATION
Power On Press the power key for 3s
Power Off Press the power key 2 times
Function
Select
After starting the printer press and hold the power key for 5
seconds, then release. Further presses of the power key selects
the category. Pressing the paper feed key selects the sub-category.
DEVICE SPECIFICATION LABEL ROLL INSTALLATION BATTERY INSTALLATION CHARGING YOUR PRINTER
1. Press the cover release button to open the top cover.
2. Ensurethattheleft-handspacerisinplaceasshowninrstpicture.
3. Load the label roll against the left-hand spacer and with the labels facing
forwards.
4. The right-hand adjustable spacer needs to be set to keep the labels in
line.To release the adjustable spacer’s lock, pull the green lever forward
- second picture – do not use excessive force. With the spacer now
freetomove,slideittobeasnugtwiththeright-handsideofthe
labels. Now, push the green lever backwards until it clicks.
5. Pull one label out of the printer and then close the lid ensuring that it
snaps into its catch.
1. When installing or replacing a battery make sure that the printer is
switched off.
2.Toinstallabatteryforthersttime,removetheprotectiveadhesivestrip
over the battery terminals.
3. Insert the battery into the compartment in the rear of the printer by
placingtheedgeoppositethecatchinrst.Then,pushthecatchintoplace
until it snaps closed.
4. To remove a battery, ensure that the printer is turned off, then do the
reverse of point 3 above.
Your KEW80L is supplied with a power supply unit with the correct
technicalspecicationtochargeyourprinter’sbattery.Onlyusethis
power supply to charge the printer.
Only use the charging interface socket on the printer to charge the
battery. Putting power to the USB Socket will NOT charge the battery.
Important - Never leave the printer unattended while charging.
Print Mode Thermal Line Printing
Paper Width 58mm
Print Density 84 dot / line
Print Speed 50 - 90mm/s
Interface USB + Bluetooth
Resolution 203dpi
Roll Diameter 50mm
Paper Thickness 0.06-0.08mm
Print Command ESC / TSPL
Character Size 24*24 point
Input Buffer 256k bytes
Power Adapter Input AC 100-220V; Output DC9V / 1A
Lithium Battery 1200mAh/7/4V
Charging Time 4 hours
Bar Code Type UPC-A, UPC-E, JAN13 (EAN1), JAN8 (EAN8),
CODE39, CODE93, CODE128,QR CODE
Operating System Android, IOS, PC(Windows)
Working Environment Temperature 0°C ~ 50°C; humidity 20% ~ 85%
Storage Environment Temperature -20°C ~ 60°C; humidity 5% ~ 95%
Power Key
Paper Feed Key
Charging Port
USB Port
OLED Screen
Cover
Release Button
Hook
Battery Clip
Right-hand
adjustable
spacer
Left-hand
Spacer
BLUETOOTH CONNECTION FAQ WARRANTY & IMPORTANT INFORMATION
This printer is upplied with a 12 month Limited Warranty. For full Terms
and Condition, please visit kewtechcorp.com
Only use compatible labels - your KEW80L has been designed to work
with the KEWPAT App using labels that are only recommended or sup-
plied by Kewtech.
New labels can be purchased from Kewtech.
Damage to the printer may result if you use labels not recommended by
Kewtech.
MENU SETTINGS
OLED display Options (selected by pressing the Paper Feed
key once in settings mode)
Settings for
KEWPAT
Label printing
Information On pressing Paper Feed, the printer’s data is
printed out.
Snooze PWROFF, OFF, 30s, 60s,90s,120,150s,180s
The timings are started after powering on,
however when connected by Bluetooth the
timings are overridden
OFF
Speed 0, 1, 2, 3, 4 , 5, 6, 7, 8 4
Paper Label,Ticket Label
CMD EMC/POS,TSPL TSPL
EDGE 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 mm 8 mm
Charset CodePage, GBK, UTF-8,Arabic, Unicode GBK
CPage NULL NULL
Language ENG ENG
PRINTER SETTINGS (Function Key)
YourKEW80Lprintercomespre-conguredtoworkwithKEWPAT
and the label stock that we supply, therefore the settings should not
need to be changed.
1. Turn the printer on.
2. On your device that you want to pair, go to settings and then Bluetooth
settings, search for a new device and select MHT-KEW-58L
3. When prompted for a password enter: 0000
Question Answer
Why are the labels scrambled
when I print the label?
Ensure that TSPL is selected in
settings.
The display shows UPDATE
MODE
Update mode means the tester is in
clean mode. Press the power key for
at least 10 seconds to exit.
Bluetooth automatically
disconnectsbeforenishing
printing
Bluetooth automatically disconnects
due to lack of power. Recharge the
battery. Spare batteries are available
if your usage is such that a second
battery is required.
The settings are correct but the
printer does not respond
Check whether the adjustable guide
is correctly located.
Unstable charging Make sure that the charging
connector has good contact.
Label details not clear Dirty print head or poor quality
label stock.
Printer shuts down automatically Low power or poor label quality.
DO NOT dispose of the printer, battery or charger within normal
household waste. Find a suitable recycling centre.
Do not allow the printer to come into contact with any form of liquid or
powder.Allowing any loose objects to enter the label compartment may
result in damage to the print head or mechanism.
Excessive ambient temperature (+30 / -5°C) or humidity will result in
degraded print quality.
Do no open the label compartment cover during printing.
If the print head becomes dirty, use a soft cloth dampened in a little
cleaning alcohol to wipe clean.
MENU SETTINGS
1. To turn on press the power key for 3 seconds then release.
2.Toaccessthecongurationmenu:
After powering on the printer press and hold the power key for
5 seconds then release it. Each subsequent press of the power
key toggles through the functions as in table 2.
3. To turn off press the power key twice in a row.
kewtechcorp.com
Power Key Paper Feed Key
LABEL STOCK
The KEW80L printer comes with a roll of the labels
that is designed to work with the printer.
To re-order the stock number is KEW80LABEL.
If other label stock is used we cannot guarantee the
performance of the printer. The label stock determines
the quality of print, ease of ejecting and protection of
the printed head.
BLUETOOTH CONNECTION FAQ WARRANTY & IMPORTANT INFORMATION
This printer is upplied with a 12 month Limited Warranty. For full Terms
and Condition, please visit kewtechcorp.com
Only use compatible labels - your KEW80L has been designed to work
with the KEWPAT App using labels that are only recommended or sup-
plied by Kewtech.
New labels can be purchased from Kewtech.
Damage to the printer may result if you use labels not recommended by
Kewtech.
MENU SETTINGS
OLED display Options (selected by pressing the Paper Feed
key once in settings mode)
Settings for
KEWPAT
Label printing
Information On pressing Paper Feed, the printer’s data is
printed out.
Snooze PWROFF, OFF, 30s, 60s,90s,120,150s,180s
The timings are started after powering on,
however when connected by Bluetooth the
timings are overridden
OFF
Speed 0, 1, 2, 3, 4 , 5, 6, 7, 8 4
Paper Label,Ticket Label
CMD EMC/POS,TSPL TSPL
EDGE 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 mm 8 mm
Charset CodePage, GBK, UTF-8,Arabic, Unicode GBK
CPage NULL NULL
Language ENG ENG
PRINTER SETTINGS (Function Key)
YourKEW80Lprintercomespre-conguredtoworkwithKEWPAT
and the label stock that we supply, therefore the settings should not
need to be changed.
1. Turn the printer on.
2. On your device that you want to pair, go to settings and then Bluetooth
settings, search for a new device and select MHT-KEW-58L
3. When prompted for a password enter: 0000
Question Answer
Why are the labels scrambled
when I print the label?
Ensure that TSPL is selected in
settings.
The display shows UPDATE
MODE
Update mode means the tester is in
clean mode. Press the power key for
at least 10 seconds to exit.
Bluetooth automatically
disconnectsbeforenishing
printing
Bluetooth automatically disconnects
due to lack of power. Recharge the
battery. Spare batteries are available
if your usage is such that a second
battery is required.
The settings are correct but the
printer does not respond
Check whether the adjustable guide
is correctly located.
Unstable charging Make sure that the charging
connector has good contact.
Label details not clear Dirty print head or poor quality
label stock.
Printer shuts down automatically Low power or poor label quality.
DO NOT dispose of the printer, battery or charger within normal
household waste. Find a suitable recycling centre.
Do not allow the printer to come into contact with any form of liquid or
powder.Allowing any loose objects to enter the label compartment may
result in damage to the print head or mechanism.
Excessive ambient temperature (+30 / -5°C) or humidity will result in
degraded print quality.
Do no open the label compartment cover during printing.
If the print head becomes dirty, use a soft cloth dampened in a little
cleaning alcohol to wipe clean.
MENU SETTINGS
1. To turn on press the power key for 3 seconds then release.
2.Toaccessthecongurationmenu:
After powering on the printer press and hold the power key for
5 seconds then release it. Each subsequent press of the power
key toggles through the functions as in table 2.
3. To turn off press the power key twice in a row.
kewtechcorp.com
Power Key Paper Feed Key
LABEL STOCK
The KEW80L printer comes with a roll of the labels
that is designed to work with the printer.
To re-order the stock number is KEW80LABEL.
If other label stock is used we cannot guarantee the
performance of the printer. The label stock determines
the quality of print, ease of ejecting and protection of
the printed head.
BLUETOOTH CONNECTION FAQ WARRANTY & IMPORTANT INFORMATION
This printer is upplied with a 12 month Limited Warranty. For full Terms
and Condition, please visit kewtechcorp.com
Only use compatible labels - your KEW80L has been designed to work
with the KEWPAT App using labels that are only recommended or sup-
plied by Kewtech.
New labels can be purchased from Kewtech.
Damage to the printer may result if you use labels not recommended by
Kewtech.
MENU SETTINGS
OLED display Options (selected by pressing the Paper Feed
key once in settings mode)
Settings for
KEWPAT
Label printing
Information On pressing Paper Feed, the printer’s data is
printed out.
Snooze PWROFF, OFF, 30s, 60s,90s,120,150s,180s
The timings are started after powering on,
however when connected by Bluetooth the
timings are overridden
OFF
Speed 0, 1, 2, 3, 4 , 5, 6, 7, 8 4
Paper Label,Ticket Label
CMD EMC/POS,TSPL TSPL
EDGE 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 mm 8 mm
Charset CodePage, GBK, UTF-8,Arabic, Unicode GBK
CPage NULL NULL
Language ENG ENG
PRINTER SETTINGS (Function Key)
YourKEW80Lprintercomespre-conguredtoworkwithKEWPAT
and the label stock that we supply, therefore the settings should not
need to be changed.
1. Turn the printer on.
2. On your device that you want to pair, go to settings and then Bluetooth
settings, search for a new device and select MHT-KEW-58L
3. When prompted for a password enter: 0000
Question Answer
Why are the labels scrambled
when I print the label?
Ensure that TSPL is selected in
settings.
The display shows UPDATE
MODE
Update mode means the tester is in
clean mode. Press the power key for
at least 10 seconds to exit.
Bluetooth automatically
disconnectsbeforenishing
printing
Bluetooth automatically disconnects
due to lack of power. Recharge the
battery. Spare batteries are available
if your usage is such that a second
battery is required.
The settings are correct but the
printer does not respond
Check whether the adjustable guide
is correctly located.
Unstable charging Make sure that the charging
connector has good contact.
Label details not clear Dirty print head or poor quality
label stock.
Printer shuts down automatically Low power or poor label quality.
DO NOT dispose of the printer, battery or charger within normal
household waste. Find a suitable recycling centre.
Do not allow the printer to come into contact with any form of liquid or
powder.Allowing any loose objects to enter the label compartment may
result in damage to the print head or mechanism.
Excessive ambient temperature (+30 / -5°C) or humidity will result in
degraded print quality.
Do no open the label compartment cover during printing.
If the print head becomes dirty, use a soft cloth dampened in a little
cleaning alcohol to wipe clean.
MENU SETTINGS
1. To turn on press the power key for 3 seconds then release.
2.Toaccessthecongurationmenu:
After powering on the printer press and hold the power key for
5 seconds then release it. Each subsequent press of the power
key toggles through the functions as in table 2.
3. To turn off press the power key twice in a row.
kewtechcorp.com
Power Key Paper Feed Key
LABEL STOCK
The KEW80L printer comes with a roll of the labels
that is designed to work with the printer.
To re-order the stock number is KEW80LABEL.
If other label stock is used we cannot guarantee the
performance of the printer. The label stock determines
the quality of print, ease of ejecting and protection of
the printed head.
BLUETOOTH CONNECTION FAQ WARRANTY & IMPORTANT INFORMATION
This printer is upplied with a 12 month Limited Warranty. For full Terms
and Condition, please visit kewtechcorp.com
Only use compatible labels - your KEW80L has been designed to work
with the KEWPAT App using labels that are only recommended or sup-
plied by Kewtech.
New labels can be purchased from Kewtech.
Damage to the printer may result if you use labels not recommended by
Kewtech.
MENU SETTINGS
OLED display Options (selected by pressing the Paper Feed
key once in settings mode)
Settings for
KEWPAT
Label printing
Information On pressing Paper Feed, the printer’s data is
printed out.
Snooze PWROFF, OFF, 30s, 60s,90s,120,150s,180s
The timings are started after powering on,
however when connected by Bluetooth the
timings are overridden
OFF
Speed 0, 1, 2, 3, 4 , 5, 6, 7, 8 4
Paper Label,Ticket Label
CMD EMC/POS,TSPL TSPL
EDGE 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 mm 8 mm
Charset CodePage, GBK, UTF-8,Arabic, Unicode GBK
CPage NULL NULL
Language ENG ENG
PRINTER SETTINGS (Function Key)
YourKEW80Lprintercomespre-conguredtoworkwithKEWPAT
and the label stock that we supply, therefore the settings should not
need to be changed.
1. Turn the printer on.
2. On your device that you want to pair, go to settings and then Bluetooth
settings, search for a new device and select MHT-KEW-58L
3. When prompted for a password enter: 0000
Question Answer
Why are the labels scrambled
when I print the label?
Ensure that TSPL is selected in
settings.
The display shows UPDATE
MODE
Update mode means the tester is in
clean mode. Press the power key for
at least 10 seconds to exit.
Bluetooth automatically
disconnectsbeforenishing
printing
Bluetooth automatically disconnects
due to lack of power. Recharge the
battery. Spare batteries are available
if your usage is such that a second
battery is required.
The settings are correct but the
printer does not respond
Check whether the adjustable guide
is correctly located.
Unstable charging Make sure that the charging
connector has good contact.
Label details not clear Dirty print head or poor quality
label stock.
Printer shuts down automatically Low power or poor label quality.
DO NOT dispose of the printer, battery or charger within normal
household waste. Find a suitable recycling centre.
Do not allow the printer to come into contact with any form of liquid or
powder.Allowing any loose objects to enter the label compartment may
result in damage to the print head or mechanism.
Excessive ambient temperature (+30 / -5°C) or humidity will result in
degraded print quality.
Do no open the label compartment cover during printing.
If the print head becomes dirty, use a soft cloth dampened in a little
cleaning alcohol to wipe clean.
MENU SETTINGS
1. To turn on press the power key for 3 seconds then release.
2.Toaccessthecongurationmenu:
After powering on the printer press and hold the power key for
5 seconds then release it. Each subsequent press of the power
key toggles through the functions as in table 2.
3. To turn off press the power key twice in a row.
kewtechcorp.com
Power Key Paper Feed Key
LABEL STOCK
The KEW80L printer comes with a roll of the labels
that is designed to work with the printer.
To re-order the stock number is KEW80LABEL.
If other label stock is used we cannot guarantee the
performance of the printer. The label stock determines
the quality of print, ease of ejecting and protection of
the printed head.
BLUETOOTH CONNECTION FAQ WARRANTY & IMPORTANT INFORMATION
This printer is upplied with a 12 month Limited Warranty. For full Terms
and Condition, please visit kewtechcorp.com
Only use compatible labels - your KEW80L has been designed to work
with the KEWPAT App using labels that are only recommended or sup-
plied by Kewtech.
New labels can be purchased from Kewtech.
Damage to the printer may result if you use labels not recommended by
Kewtech.
MENU SETTINGS
OLED display Options (selected by pressing the Paper Feed
key once in settings mode)
Settings for
KEWPAT
Label printing
Information On pressing Paper Feed, the printer’s data is
printed out.
Snooze PWROFF, OFF, 30s, 60s,90s,120,150s,180s
The timings are started after powering on,
however when connected by Bluetooth the
timings are overridden
OFF
Speed 0, 1, 2, 3, 4 , 5, 6, 7, 8 4
Paper Label,Ticket Label
CMD EMC/POS,TSPL TSPL
EDGE 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 mm 8 mm
Charset CodePage, GBK, UTF-8,Arabic, Unicode GBK
CPage NULL NULL
Language ENG ENG
PRINTER SETTINGS (Function Key)
YourKEW80Lprintercomespre-conguredtoworkwithKEWPAT
and the label stock that we supply, therefore the settings should not
need to be changed.
1. Turn the printer on.
2. On your device that you want to pair, go to settings and then Bluetooth
settings, search for a new device and select MHT-KEW-58L
3. When prompted for a password enter: 0000
Question Answer
Why are the labels scrambled
when I print the label?
Ensure that TSPL is selected in
settings.
The display shows UPDATE
MODE
Update mode means the tester is in
clean mode. Press the power key for
at least 10 seconds to exit.
Bluetooth automatically
disconnectsbeforenishing
printing
Bluetooth automatically disconnects
due to lack of power. Recharge the
battery. Spare batteries are available
if your usage is such that a second
battery is required.
The settings are correct but the
printer does not respond
Check whether the adjustable guide
is correctly located.
Unstable charging Make sure that the charging
connector has good contact.
Label details not clear Dirty print head or poor quality
label stock.
Printer shuts down automatically Low power or poor label quality.
DO NOT dispose of the printer, battery or charger within normal
household waste. Find a suitable recycling centre.
Do not allow the printer to come into contact with any form of liquid or
powder.Allowing any loose objects to enter the label compartment may
result in damage to the print head or mechanism.
Excessive ambient temperature (+30 / -5°C) or humidity will result in
degraded print quality.
Do no open the label compartment cover during printing.
If the print head becomes dirty, use a soft cloth dampened in a little
cleaning alcohol to wipe clean.
MENU SETTINGS
1. To turn on press the power key for 3 seconds then release.
2.Toaccessthecongurationmenu:
After powering on the printer press and hold the power key for
5 seconds then release it. Each subsequent press of the power
key toggles through the functions as in table 2.
3. To turn off press the power key twice in a row.
kewtechcorp.com
Power Key Paper Feed Key
LABEL STOCK
The KEW80L printer comes with a roll of the labels
that is designed to work with the printer.
To re-order the stock number is KEW80LABEL.
If other label stock is used we cannot guarantee the
performance of the printer. The label stock determines
the quality of print, ease of ejecting and protection of
the printed head.
BLUETOOTH CONNECTION FAQ WARRANTY & IMPORTANT INFORMATION
This printer is upplied with a 12 month Limited Warranty. For full Terms
and Condition, please visit kewtechcorp.com
Only use compatible labels - your KEW80L has been designed to work
with the KEWPAT App using labels that are only recommended or sup-
plied by Kewtech.
New labels can be purchased from Kewtech.
Damage to the printer may result if you use labels not recommended by
Kewtech.
MENU SETTINGS
OLED display Options (selected by pressing the Paper Feed
key once in settings mode)
Settings for
KEWPAT
Label printing
Information On pressing Paper Feed, the printer’s data is
printed out.
Snooze PWROFF, OFF, 30s, 60s,90s,120,150s,180s
The timings are started after powering on,
however when connected by Bluetooth the
timings are overridden
OFF
Speed 0, 1, 2, 3, 4 , 5, 6, 7, 8 4
Paper Label,Ticket Label
CMD EMC/POS,TSPL TSPL
EDGE 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 mm 8 mm
Charset CodePage, GBK, UTF-8,Arabic, Unicode GBK
CPage NULL NULL
Language ENG ENG
PRINTER SETTINGS (Function Key)
YourKEW80Lprintercomespre-conguredtoworkwithKEWPAT
and the label stock that we supply, therefore the settings should not
need to be changed.
1. Turn the printer on.
2. On your device that you want to pair, go to settings and then Bluetooth
settings, search for a new device and select MHT-KEW-58L
3. When prompted for a password enter: 0000
Question Answer
Why are the labels scrambled
when I print the label?
Ensure that TSPL is selected in
settings.
The display shows UPDATE
MODE
Update mode means the tester is in
clean mode. Press the power key for
at least 10 seconds to exit.
Bluetooth automatically
disconnectsbeforenishing
printing
Bluetooth automatically disconnects
due to lack of power. Recharge the
battery. Spare batteries are available
if your usage is such that a second
battery is required.
The settings are correct but the
printer does not respond
Check whether the adjustable guide
is correctly located.
Unstable charging Make sure that the charging
connector has good contact.
Label details not clear Dirty print head or poor quality
label stock.
Printer shuts down automatically Low power or poor label quality.
DO NOT dispose of the printer, battery or charger within normal
household waste. Find a suitable recycling centre.
Do not allow the printer to come into contact with any form of liquid or
powder.Allowing any loose objects to enter the label compartment may
result in damage to the print head or mechanism.
Excessive ambient temperature (+30 / -5°C) or humidity will result in
degraded print quality.
Do no open the label compartment cover during printing.
If the print head becomes dirty, use a soft cloth dampened in a little
cleaning alcohol to wipe clean.
MENU SETTINGS
1. To turn on press the power key for 3 seconds then release.
2.Toaccessthecongurationmenu:
After powering on the printer press and hold the power key for
5 seconds then release it. Each subsequent press of the power
key toggles through the functions as in table 2.
3. To turn off press the power key twice in a row.
kewtechcorp.com
Power Key Paper Feed Key
LABEL STOCK
The KEW80L printer comes with a roll of the labels
that is designed to work with the printer.
To re-order the stock number is KEW80LABEL.
If other label stock is used we cannot guarantee the
performance of the printer. The label stock determines
the quality of print, ease of ejecting and protection of
the printed head.
Table of contents
