Keychron K11 Pro User manual

Quick Start Guide
If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.
Connect Bluetooth
1
Press fn1 + Q (for 4 seconds) and pair with
device named Keychron K11 Pro.
Bluetooth
Connect Cable
2
Bluetooth

Not Happy
[e-mail]
The Layers
4
There are five layers of key settings on the keyboard.
The layer 0 is for the Mac system. The layer 1 is for the
Windows system. The layer 2 is for the Mac Multimedia
keys. The layer 3 is for the Windows Multimedia keys.
The layer 4 is for the Function keys.
If your system toggle is switched
to Mac, then the layer 0 will be
activated.
If your system toggle is switched
to Windows, then the layer 1 will be
activated.
WinMac
01
LAYER 234
Win
Mac Multimedia
Windows Multimedia
Function
Mac
0 1
LAYER 234
WinMac
0
LAYER 2341
Multimedia Key and Function Key
5
Mulmedia keys Funcon keys
In order to get Mulmedia Key, you need to press fn1 and Key.
In order to get Funcon Key, you need to press fn2 and Key.
6The Backlight
Press fn1 + A to change the lighting effect Press fn1 + caps lock to turn the backlight on/off
fn1 + A fn1 + caps lock
Adjust The Backlight Brightness
7
Press fn1 + S to increase the backlight brightness Press fn1 + X to decrease the backlight brightness
fn1 + S fn1 + X
The keyboard is highly customizable and easy to be rebuilt.
If anything goes wrong with any of the keyboard components
of keyboard during the warranty period, we will only replace
the defective parts of the keyboard, not the whole keyboard.
Warranty
8
If you are building the keyboard for the first time, we highly
recommend you watch the building tutorial video on our
website first, then start building the keyboard yourself.
Watch The Building Tutorial On Our Website
9
① Plug in the power cable and switch the keyboard to Cable mode.
② Factory reset the keyboard by pressing fn2 + J + Z (for 4 seconds).
③ Download the right firmware and QMK Toolbox from our website.
④ Switch the keyboard to OFF mode and remove the space bar keycap
to find the reset button on the PCB.
⑤ Hold the reset key first, then switch the keyboard to Cable mode.
Release the reset key, and the keyboard will now enter DFU mode.
⑥ Flash the firmware with the QMK Toolbox.
⑦ Factory reset the keyboard again by pressing fn2 + J + Z (for 4 seconds).
Troubleshooting? Don’t know what’s going on with the keyboard?
Step by step guide can be found on our website.
Factory Reset
10
Your keyboard’s best friend
The VIA Key Remapping Software
3
Please visit caniusevia.com to download the
latest VIA software to remap the keys.
If the VIA software cannot recognize your
keyboard, please reach out to our support
to get the instruction. (VIA only works when
the keyboard is connected by wire to the computer.)