Keychron K12 User manual

K12 Bluetooth Mechanical Keyboard

2
Keychron K12 Bluetooth Mechanical Keyboard x 1
Type-C Cable * 1
Manual * 1
Quick Start Guide * 1
Extra Keycaps Set * 1
IN THE BOX:

Quick Start Guide
If you are a Windows user, please find the appropriate keycaps in the box,
then follow the instructions below to find and replace the following keycaps.
Mac / Windows
3

4
Press fn1 + Q (for 3 seconds) and pair with
device named Keychron K12
Switch toggle to Bluetooth
fn1 Q
Switch toggle to Cable

5
For RGB version - Press fn2 + right arrow /
fn2

6
6 6.5
For Mac - Karabiner For Windows - SharpKeys
Karabiner SharpKeys
Remap keys Linux’s Setting
We have a Linux user group on facebook. Please search
“Keychron Linux Group” on facebook. So you can
better experience with our keyboard.
We don’t have an oicial software to remap the keys yet.
But you can use these two software to get the job done.
(Except the light eect key)
4
fn2

7
fn2

8
K12 BLUETOOTH MECHANICAL KEYBOARD SPECIFICATIONS
Number of keys: 61
Switch type: Mechanical / Optical Switch
Battery: 4000mAh
Working time: Around 70 hours with the backlight on.
Charging time: Around 3 hours
Charging port: USB Type-C
Mode: Bluetooth/Wired
Bluetooth operating distance: Within 10 meters (open space)
Name of Bluetooth device: Keychron K12
Operating Environment: -10 to 50°c
Technical specifications can be subjected to change without notice we apologize for any
inconvenience caused

9
K12 BLUETOOTH MECHANICAL KEYBOARD OVERVIEW
Mac
Windows
2
4
3
5

10

11

12

13

14
confirm
connections
connection
Settings
find

15

16

K12 蓝牙机械键盘

18
KeychronK12蓝牙机械键盘
赠送键帽套装x1
快速上手指南x1

19
快速上手指南
如果你是 Windows 用户，请在包装盒里找到如下的键帽，用拔键器拔下键盘
上的对应键帽并且更换。
Mac / Windows

20
把开关拨到蓝牙模式
长按fn1+Q三秒使键盘进入配对模式，
键盘的配对名为：Keychron�K12.
连接蓝牙
fn1 Q
连接有线 把开关拨到有线模式