Keyscaper YLC-1291 User manual

keyscaper®
fan gear
Power Bank Flashlight Combination
Product Manual
Version 1.0

THANK YOU!
Thanks for choosing Keyscaper!
Please read the following manual carefully to ensure you get the most out of your
Power Bank Flashlight Combincation.
Product Guide:
Index: Page
Maintenance &
Product Specs 3
Charging the Battery 4
Charging a Device 5
Using the Flashlight 6
Power Button
Micro USB Port
Charge Indicator
Battery Indicator
3
4
6
5
Lanyard Hole
2
USB Port
1

WARNINGS!
Maintenance
Device Specications
Do not store in a depleted state for long periods of time. Doing so will damage the internal
battery. Charge this product at least once every two months, to prevent damage.
Keep this product dry. It is best to avoid damp conditions and corrosive materials when storing,
handling and using this device.
Do not clean this product with harsh chemicals.
Please read all instructions and warnings before using this product.
DO NOT modify, crush, disassemble, or open this product.
DO NOT expose this product to water or re.
KEEP AWAY from high voltage devices.
KEEP AWAY from children, this is not a toy.
Model # YLC-1291
Input 4.5~5.8V 1A
Output 5V/1A
Capacity 2600mAh
Dimension 029*113mm
Weight 105g
Battery Type Lithium-ion
Charging via USB 3 hours
Battery Life More than 500 cycles

Charging the Battery
Charging a Mobile Device
How to Use:
1. Using the provided USB cable, connect the power bank ashlight combo to a usb port.
1. Using the provided USB cable, connect the power bank ashlight combo to a mobile device.
2. Charging will start automatically.
3. The battery level indicator will show the level of charge as it progresses.
1 ashing LED = less than 15%
1 solid LED = 16% - 30%
2 LEDs = 31% - 70%
3 LEDs = 71% - 100%
4. When all 4 LEDs are solid, the battery is fully charged.
(This device comes with automatic overcharge protection. This prevents damage to the internal battery. )
2. Press the power button to begin charging. The charge indicator light will remain on
while charging.
36
Micro USB
USB
USB
5

Using the Flashlight
1. Holding the power button for longer than 2 seconds will swtich the power bank ashlight
combo to ashlight mode.
2. There are 4 light modes for the ashlight.
Normal bright → Extra bright → Flashing light → SOS signal
You can choose different modes by pressing the power button again for less than 2 seconds.
3. To turn the ashlight off, hold the power button for longer than 2 seconds.
3