Keysight ixia Application Server User manual

Application Server
Release 9.10
Installation Guide
Document version: 202007160823+05:30

Notices
Copyright Notice
© Keysight Technologies 2017–
2020
No part of this document may
be reproduced in any form or by
any means (including electronic
storage and retrieval or
translation into a foreign
language) without prior
agreement and written consent
from Keysight Technologies,
Inc. as governed by United
States and international
copyright laws.
Warranty
The material contained in this
document is provided “as is,”
and is subject to being
changed, without notice, in
future editions. Further, to the
maximum extent permitted by
applicable law, Keysight
disclaims all warranties, either
express or implied, with regard
to this manual and any
information contained herein,
including but not limited to the
implied warranties of
merchantability and fitness for
a particular purpose. Keysight
shall not be liable for errors or
for incidental or consequential
damages in connection with the
furnishing, use, or performance
of this document or of any
information contained herein.
Should Keysight and the user
have a separate written
agreement with warranty terms
covering the material in this
document that conflict with
these terms, the warranty
terms in the separate
agreement shall control.
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and
may be used or copied only in
accordance with the terms of
such license.
U.S. Government Rights
The Software is "commercial
computer software," as defined
by Federal Acquisition
Regulation ("FAR") 2.101.
Pursuant to FAR 12.212 and
27.405-3 and Department of
Defense FAR Supplement
("DFARS") 227.7202, the U.S.
government acquires
commercial computer software
under the same terms by which
the software is customarily
provided to the public.
Accordingly, Keysight provides
the Software to U.S.
government customers under
its standard commercial
license, which is embodied in
its End User License Agreement
(EULA), a copy of which can be
found at
http://www.keysight.com/find
/sweula or
https://support.ixiacom.com/s
upport-services/warranty-
license-agreements. The
license set forth in the EULA
represents the exclusive
authority by which the U.S.
government may use, modify,
distribute, or disclose the
Software. The EULA and the
license set forth therein, does
not require or permit, among
other things, that Keysight: (1)
Furnish technical information
related to commercial computer
software or commercial
computer software
documentation that is not
customarily provided to the
public; or (2) Relinquish to, or
otherwise provide, the
government rights in excess of
these rights customarily
provided to the public to use,
modify, reproduce, release,
perform, display, or disclose
commercial computer software
or commercial computer
software documentation. No
additional government
requirements beyond those set
forth in the EULA shall apply,
except to the extent that those
terms, rights, or licenses are
explicitly required from all
providers of commercial
computer software pursuant to
the FAR and the DFARS and are
set forth specifically in writing
elsewhere in the EULA.
Keysight shall be under no
obligation to update, revise or
otherwise modify the Software.
With respect to any technical
data as defined by FAR 2.101,
pursuant to FAR 12.211 and
27.404.2 and DFARS 227.7102,
the U.S. government acquires
no greater than Limited Rights
as defined in FAR 27.401 or
DFAR 227.7103-5 (c), as
applicable in any technical
data. 52.227-14 (June 1987) or
DFAR 252.227-7015 (b)(2)
(November 1995), as
applicable in any technical
data.
Safety Information
Do not proceed
beyond a hazard
notice until the
indicated conditions
are fully understood and met.
– ii –

ACAUTION notice denotes a
hazardous situation that, if not
avoided, could result in minor
or moderate injury.
AWARNING notice denotes a
hazardous situation that, if not
avoided, could result in death
or serious injury.
– iii –

Contact Us
Ixia headquarters
26601 West Agoura Road
Calabasas, California 91302
+1877 367 4942 – Toll-free North America
[phone] – Outside North America
+1.818.871.1805 – Fax
www.ixiacom.com/contact/info
Support
Global Support [phone] [e-mail]
Regional and local support contacts:
APAC Support [phone] [e-mail]
Australia [phone] [e-mail]
EMEA Support [phone] [e-mail]
Greater ChinaRegion [phone] [e-mail]
Hong Kong [phone] [e-mail]
India Office [phone] [e-mail]
Japan Head Office [phone] [e-mail]
Korea Office [phone] [e-mail]
Singapore Office [phone] [e-mail]
Taiwan (local toll-free number) 00801856991 [e-mail]
– iv –

Documentation conventions
The following documentation conventions are used in this guide:
Describing interactions with the UI
You can interact with products by using different input methods: keyboard, mouse, touch, and more.
So in most parts of the user documentation, generic verbs have been used that work with any input
method. In cases where input-neutral verbs do not work, mouse-specific verbs are used as the first
choice, followed by touch-specific verbs as the second choice.
See the following table for examples on how you can interpret the different input methods.
Input-neutral Mouse Touch
Select Modify. Click Modify.Tap Modify.
Select Accounts >Other
accounts >Add an account.
Click Accounts >Other
accounts >Add an account.
Tap Accounts >Other
accounts >Add an account.
To open the document in Outline
view, select View >Outline.
To open the document in
Outline view, click View >
Outline.
To open the document in
Outline view, tap View >
Outline.
Select Protocols. Click the Protocols tab. Tap Protocols.
-NA- Double-click the Client wizard. Double-tap the Client wizard.
Open the Packages context
menu.
Right-click Packages to open
the shortcut menu.
Long tap Packages to open
the shortcut menu.
Deprecated words
The following words have been replaced with new words, considering the audience profile, our modern
approach to voice and style, and our emphasis to use input-neutral terms that support all input
methods.
Old usage... New usage...
shortcut menu, right-click menu context menu
click, right-click select
drag and drop drag
Documentation conventions
– v –

CONTENTS
Documentation conventions v
About this guide 1
Note icons and messages 2
Typographical conventions 2
Textual conventions 3
Chapter 1 Ixia Application Server Installation 5
Note Regarding Ixia Applications 5
Supported Applications 5
Overview and Specifications 5
Installation and Setup 7
Overview 7
Unpacking the System 7
Preparing for Setup 7
Choosing a Setup Location 7
Rack Precautions 7
Installer Precautions 8
Rack Mounting Considerations 8
Ambient Operating Temperature 8
Reduced Airflow 8
Mechanical Loading 8
Circuit Overloading 8
Reliable Ground 8
– vi –

Installing the System into a Rack 8
Identifying the Sections of the Rack Rails 9
Installing the Inner Rails 9
Installing the Outer Rails 9
Installing the Server into the Rack 10
Installing a Server into a Telco Rack 11
Providing Power 12
System Interface 12
Overview 13
Control Panel Buttons 13
Safety Precautions 14
Electrical 14
General Safety Precautions 15
ESD Precautions 15
Operating Precautions 15
Onboard Battery Replacement 15
Chapter 2 Ixia Application Server Settings 17
Remote Desktop Usage 17
Logging In to the Ixia Application Server 17
User Account Settings 17
Chapter 3 Running Ixia Applications 21
Configuration 21
Multi-User Support 22
Known Limitations 24
Installation 24
IxNetwork 24
IxAutomate 25
– vii –

INDEX 27
– viii –

This page intentionally left blank.
– ix –

About this guide
This section explains the notational and typographical conventions used in this documentation, and
provides a list of related documentation.
Section contents:
Note icons and messages 2
Typographical conventions 2
Textual conventions 3
–1–

Note icons and messages
The following table describes the note icons and messages used in this document.
Name Icon Description
Note Indicates information that emphasizes or supplements important points in the
main text.
Important Indicates information that is essential to the completion of a task.
Tip Provides supplemental suggestions for applying techniques and procedures to
accomplish a task.
Typographical conventions
The following table describes the typographical conventions used in this document.
Convention Description
bold text Bold text indicates:
lGraphical user interface element names (such as dialog boxes, buttons, menu
selections, and so forth).
lCommand line interface commands and options.
lThe name of a field, option, or parameter when used as part of an instruction.
For example: “Select the desired InnerPriority value.”
Italic text Italic text indicates:
lA text reference to the name of a field, option, or parameter.
lDocument and book titles.
lThe first reference to a new term.
lSpecial identification or emphasis in a statement.
monospace
text
Text shown in a monospace font is used to indicate:
lText that you input. For example:
Enter cd project1
lCode samples, including keywords and variables within text and as separate
paragraphs, and user-defined program elements within text.
lText file content or examples, such as lines of text from an .ini file.
About this guide
–2–

Textual conventions
The following table describes the typographical conventions used in this document.
Convention Description
Boolean text Words that represent Boolean notation are written in all uppercase text.
For example: 192.168.5.5 OR 10.20.30.30.
Keystrokes Simultaneous keystrokes are shown by joining the key names with a plus
sign(+).
For example, CTRL+Q.
> (right angle
bracket)
Separates levels in a hierarchy of menu selections.
For example: “Select Administration >Users.”
About this guide
–3–

This page intentionally left blank.
–4–

CHAPTER 1Ixia Application Server
Installation
Note Regarding Ixia Applications
The Ixia Application Server does not have Ixia applications pre-installed.
In order to support Ixia applications, the client component of Ixia applications used must be installed
on the Ixia Application Server. For Ixia application compatibility and support, please visit
www.ixiacom.com (under Support, choose Product Compatibility Matrix ).
Supported Applications
lIxAutomate 6.90 GA SP1, or later version
lIxLoad 5.10 GA, or later version
lIxN2X 6.13 GA, or later version
lIxNetwork 5.70 EA Patch 2, or later version
lIxOS 5.70 EA SP2 Client, or later version
A downloadable version of the applications are available at www.ixiacom.com (under Support,
Downloads & Updates).
Overview and Specifications
The Ixia Application Server is a high-end dual-processor, 1U rack-mount server with state-of-the-art
features. It optimizes and enhances Ixia test application performance by running Ixia applications, in a
server-based environment. Connection via Microsoft's remote desktop (RDT) facility provides access
to the test applications on the server, minimizing client requirements. The Ixia Application Server
centralizes application updates and installation, simplifying test-environment management.
Figure: 1U Multi-User Application Server
Specifications are detailed in Table: Specifications.
–5–

Table: Specifications
Ixia Application Server
Motherboard Dual-processor motherboard using Intel C610-series chipset.
Processor 2 x Intel Xeon processor E5-2600 v3 product family.
Memory 64GB RDIMM, 2133 MT/s, Dual Rank.
Drives One 1TB SATA 6Gbps 3.5 inch hot-plug hard-drive
One 480GB Solid State Drive 6Gbps 2.5 inch hot-plug drive
I/O Ports Rear panel ports: COM port, VGA port, USB and USB 3.0 ports
Front panel ports: VGA port, DVD drive
Ethernet
Ports
4 x 1 Gigabit Ethernet ports.
System
Power
2 x 550W power supply units, 100-240VAC, 50/60Hz, 3.7A-7.4A.
Control
Panel
LEDs indicate power on, network activity, hard disk drive activity, overheat warning,
and fan failure; control panel also includes a main power button and a reset button.
Cooling
System
6x high-efficiency fans.
Physical Dimensions (WxHxD) 17.2 x 1.7 x 25.4 in. (437 x 43 x 645 mm)
Weight: 27 lbs (12.25 kg), Shipping Weight: 47.45 lbs (21.7 kg)
Operating
Environment
Up to 35°C (95°F) maximum temperature is reduced by 1°C/300m (1°F/547 ft) above
950m (3,117 ft).
Operating
System
Microsoft Windows Server 2012 64-bit Standard Edition with 10 remote desktop user
licenses.
Rackmount
Kit
Rails for tool-less mounting in 4-post racks with square or unthreaded round holes, or
tooled mounting in 4-post threaded hole racks, with support for optional tool-less
cable management arm.
Application
Support
10 Users on the following applications:
IxNetwork
IxLoad
IxOS
Chapter 1 Ixia Application Server Installation
–6–

Installation and Setup
Overview
This section provides a quick setup checklist to get your Ixia Application Server up and running. Follow
the steps in the order given to get the system operational within a minimum amount of time. This quick
setup assumes that your system has come to you with the processors and memory pre-installed. If
your system is not already fully integrated with a serverboard, processors, and system memory, turn
to the chapter or section noted in each step for details on installing specific components.
Unpacking the System
Inspect the box the Ixia Application Server was shipped in and note if it was damaged in any way. If
the server itself shows damage you should file a damage claim with the carrier who delivered it. Decide
on a suitable location for the rack unit that will hold the Ixia Application Server. It should be situated in
a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
electromagnetic fields are generated. You will also need it placed near a grounded power outlet. Read
the Rack and Server Precautions in the next section.
Preparing for Setup
The shipment box of the Ixia Application Server should include two sets of rail assemblies, two rail
mounting brackets, and the mounting screws needed to install the system into the rack. Read this
section in its entirety before you begin the installation procedure outlined in the sections that follow.
Choosing a Setup Location
lLeave enough clearance in front of the rack to allow you to open the front door completely (~25
inches) and approximately 30 inches of clearance in the back of the rack to allow for sufficient
airflow and ease in servicing. This product is suitable for installation only in a Restricted Access
Location (dedicated equipment rooms and service closets).
lThis product is not suitable for use with visual display work place devices according to §2 of the
German Ordinance for Work with Visual Display Units.
Rack Precautions
lEnsure that the leveling jacks on the bottom of the rack are fully extended to the floor with the
full weight of the rack resting on them.
lIn single rack installation, stabilizers should be attached to the rack. In multiple rack
installations, the racks should be grouped together.
lAlways make sure the rack is stable before extending a component from the rack.
lYou should extend only one component at a time. Extending two or more components
simultaneously may cause the rack to become unstable.
Chapter 1 Ixia Application Server Installation
–7–

Installer Precautions
lReview the Safety Precautions.
lDetermine the placement of each component in the rack before you install the rails.
lInstall the heaviest installer components on the bottom of the rack first, and then work upwards.
lUse a regulating uninterruptible power supply (UPS) to protect the installer from power surges,
voltage spikes and to keep your system operating in case of a power failure.
lAllow the hot plug SATA drives and power supply modules to cool before touching them.
lTo maintain proper cooling, always keep the rack’s front door and all panels and components on
the installers closed when not servicing.
Rack Mounting Considerations
Ambient Operating Temperature
If installed in a closed or multi-unit rack assembly, the ambient operating temperature of the rack
environment may be greater than the ambient temperature of the room. Therefore, consider installing
the equipment in an environment compatible with the manufacturer’s maximum rated ambient
temperature (Tmra).
Reduced Airflow
Mount equipment into a rack so that the amount of airflow required for safe operation is not
compromised.
Mechanical Loading
Mount equipment into a rack so that a hazardous condition does not arise due to uneven mechanical
loading.
Circuit Overloading
Consider the connection of the equipment to the power supply circuitry and the effect that any possible
overloading of circuits might have on overcurrent protection and power supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when addressing this concern.
Reliable Ground
Maintain a reliable ground at all times. To ensure this, the rack itself should be grounded. Pay
particular attention to power supply connections other than the direct connections to the branch circuit
(that is, the use of power strips).
Installing the System into a Rack
This section provides information on installing the Ixia Application Server into a rack unit with the rack
rails provided.
Chapter 1 Ixia Application Server Installation
–8–

There are a variety of rack units on the market and the assembly procedure may differ slightly. You
should also refer to the installation instructions that came with the rack unit you are using.
Identifying the Sections of the Rack Rails
There are two rack rail assemblies in the rack mounting kit. Each assembly consists of two sections; an
inner fixed chassis rail that secures directly to the server chassis and an outer fixed rack rail that
secures directly to the rack itself (see Figure: Inner and Outer Rails). Two pairs of short brackets to be
used on the front side of the outer rails are also included.
Installing the Inner Rails
Both the left and right side inner rails have been pre-attached to the chassis, shown in the following
figure.
Figure: Inner and Outer Rails
Installing the Outer Rails
To install the outer rails, do the following:
1. Measure the distance from the front rail from the front rail to the rear rail of the rack.
2. Attach a short bracket to the front side of the right outer rail and a long bracket to the rear side of
the right outer rail.
3. Adjust both the short and long brackets to the proper distance so that the rail can fit snugly into
the rack.
4. Secure the short bracket to the front side of the outer rail with two screws and the long bracket to
the rear side of the outer rail with three screws.
5. Repeat these steps for the left outer rail.
Chapter 1 Ixia Application Server Installation
–9–

Note: Both chassis rails have a locking tab, which serves two functions. The first is to lock the
server into place when installed and pushed fully into the rack, which is its normal position.
Second is to lock the server in place when fully extended from the rack. This prevents the server
from coming completely out of the rack when you pull it out for servicing.
Figure: Installing the Inner and Outer Rails
Installing the Server into the Rack
You should now have rails attached to both the chassis and the rack unit. The next step is to install the
server into the rack.
To install the server into the rack, do the following:
1. Line up the rear of the chassis rails with the front of the rack rails.
2. Slide the chassis rails into the rack rails, keeping the pressure even on both sides (you may have
to release the pressure on the locking tabs when inserting).
Chapter 1 Ixia Application Server Installation
– 10 –

Figure: Installing the Server into a Rack
Installing a Server into a Telco Rack
To install the Ixia Application Server into a Telco type rack, do the following:
1. Use two L-shaped brackets on either side of the chassis.
2. Determine how far follow the server will extend out the front of the rack. Larger chassis should be
positioned to balance the weight between front and back. If a bezel is included on your server,
remove it.
3. Attach the two front brackets to each side of the chassis, then the two rear brackets positioned
with just enough space to accommodate the width of the telco rack.
4. Finish by sliding the chassis into the rack and tightening the brackets to the rack.
Chapter 1 Ixia Application Server Installation
– 11 –