Kid Eco Rocket User manual

3KRAI1601
Rocket Contents List
(Registered Design 4002673) Please retain this document for future reference.
Toys that won’t cost us the earth
www.cardboardtoys.com
3WM Ltd T/A Kid-Eco
Units 1,2 & 4, Hollis Road, Grantham, Lincs. NG31 7QH
tel: [phone] | fax: [phone] | email: [e-mail]
Please fold all creases well prior to assembly of toy and ensure all parts are securely connected. Any offcuts should be discarded.
The rocket is designed primarily for indoor use but is also suitable for outdoor use in dry, calm conditions. The rocket should be stored in a dry
place and should be kept away from fire or any naked flame. The rocket should be inspected regularly before, during and after use for any signs
of damage, which could cause potential injury.
This product is suitable for all ages but we recommend that it should always be used under the direct supervision of an adult.
Quality Assurance
 2xRocketBase
 2xRocketTops
 4xRocketFins
 1xAssemblyInstructions
Signed: _____________

3KRAI1601
Rocket Assembly Instructions
(Registered Design 4002673) Please retain this document for future reference.
Toys that won’t cost us the earth
www.cardboardtoys.com
3WM Ltd T/A Kid-Eco
Units 1,2 & 4, Hollis Road, Grantham, Lincs. NG31 7QH
tel: [phone] | fax: [phone] | email: [e-mail]
Step 1
Step 2
Please fold all creases well prior to assembly of toy and ensure all parts are securely connected. Any offcuts should be discarded.
•Insert tabs (A1) into slots (B1) at opposite end of turret base and gently pull down to lock into place.
•Fold flaps (C1) inwards for stability.
•Insert tabs (D1) at top into adjacent slots (E1) starting at one end and continuing clockwise.
•Insert tabs (A2) into adjacent slots (B2) and gently pull down to lock into place. Repeat to join both ends.
•Insert tabs (C2) into adjacent slots (D2), starting at one end and continuing clockwise.
A1
A2
D1
C2
C2
B1
B2
E1
D2
D2
A1
C1
B1
page 2 of 3
The rocket is designed primarily for indoor use but is also suitable for outdoor use in dry, calm conditions. The rocket should be stored in a dry
place and should be kept away from fire or any naked flame. The rocket should be inspected regularly before, during and after use for any signs
of damage, which could cause potential injury.
This product is suitable for all ages but we recommend that it should always be used under the direct supervision of an adult.

Rocket Assembly Instructions
(Registered Design 4002673) Please retain this document for future reference.
Toys that won’t cost us the earth
www.cardboardtoys.com
The rocket is designed primarily for indoor use but is also suitable for outdoor use in dry, calm conditions. The rocket should be stored in a dry
place and should be kept away from fire or any naked flame. The rocket should be inspected regularly before, during and after use for any signs
of damage, which could cause potential injury.
This product is suitable for all ages but we recommend that it should always be used under the direct supervision of an adult.
3WM Ltd T/A Kid-Eco
Units 1,2 & 4, Hollis Road, Grantham, Lincs. NG31 7QH
tel: [phone] | fax: [phone] | email: [e-mail]
Step 3
Step 4
•Insert tabs (A3) on the rocket top into adjacent slots (B3) in rocket base.
•Fold each of the fins in half along the centre creases and insert tabs (C3) into slots (D3) and gently pull
down to lock into place.
Rocket BaseRocket Top
Please fold all creases well prior to assembly of toy and ensure all parts are securely connected. Any offcuts should be discarded.
Assembled Rocket
B3
D3
C3
A3
Rocket Fin
page 3 of 3
3KRAI1601