LAMONT HOME 906 User manual

Style #906
Lot or Model #:
Date of Purchase:
(to be completed by consumer) REV. #1 (2012)
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
ADULT ASSEMBLY IS REQUIRED.
TOOLS NEEDED 
A FLAT OR PHILLIPS HEAD SCREWDRIVER AND AN
ADJUSTABLE WRENCH, 7/16 INCH WRENCH OR A PAIR OF PLIERS.
LAMONT HOME
Bassinet Assembly Instructions
Lamont Home Customer Service Department
800-553-5621 (8:00am—4:30pm CST, M-F)
Bassinet Made in the USA
Liners and Pad Made in China

LAMONT HOME
Bassinet Assembly Instructions
800-553-5621 • www.lamontlimited.com
page 2
CONGRATULATIONS!
Congratulations on your purchase of the LaMont Home Bassinet. We
appreciate your business, and recognize our obligation to earn your
condence. is product was designed, developed and produced with
infant safety as the #1 priority.
You are about to place the most valuable gi of love that will ever enter
your life into this bassinet. Before you do so, we strongly encourage
you to carefully read all warnings and instructions found on all
product labels and these assembly instructions. Much of what can be
found in this manual has to do with common sense, but make no
mistake; infant safety expands far beyond “common sense”, especially
for new parents. is manual will help to inform you of potential
hazards recognized by the juvenile product industry, but there is no
substitute for personalized instruction from your baby’s licensed
pediatrician. Serious, and even fatal accidents can happen, so please do
not use this product before you are completely aware of, and fully
understand all of the potential risks and hazards that exist.
ere is also no substitute for adult supervision and vigilance. Special
care must be taken when choosing a location for this bassinet within
your home. Under no circumstances should this bassinet be placed
near a heat source (electric, gas or other) where such heat source could
start a re, or overheat your baby. is bassinet should also be located
where you can hear your child, and continually monitor your baby’s
safety. Your baby is helpless and is not only dependent upon you for
love and attention, but also your good judgment and safety
consideration.
Again, thank you for your condence, and for your patronage. We wish
you the best as you vigilantly watch over this treasure of a lifetime –
your child.

800-553-5621 • www.lamontlimited.com
LAMONT HOME
Bassinet Assembly Instructions
page 3
WE ARE HERE TO HELP!
We do our best to ensure that your bassinet arrives in excellent condition.
In the event that a part is damaged or missing,
Lamont Home will be happy to provide you with replacement parts, at no
charge, within 90 days of purchase, providing the parts are available in our
warehouse and the item purchased is part of our current inventory.
In order to receive missing or damaged parts, at no charge, you must
provide proof of purchase within 90 days.
If you need assistance with assembly or to order replacement parts,
please call our Customer Service Associates, prior to returning the
item to the store.
Lamont Home Customer Service Department
800-553-5621
Monday-Friday, 8:00am—4:30pm CST
For instructional video on how to assemble this bassinet,
go to our website:
www.lamontlimited.com and click on link
WARRANTY
is product is guaranteed against defective materials and
workmanship for 90 days from the date of purchase.
If you need to return product, you must rst contact our
Lamont Home Customer Service Department.
You must have original sales receipt.

Failure to follow these warnings and instructions could result in
serious injury or death.
Please check for missing or damaged parts prior to assembly.
Please launder liner and mattress cover prior to assembly.
• Read all instructions before assembling unit.
• is item requires assembly by an adult.
• Keep Assembly Instructions for reference.
• Do not use this unit if the instructions cannot be strictly followed.
• Before usage or assembly, inspect unit for damaged hardware, loose
joints, missing parts or sharp edges. NEVER use if there are any loose
or missing fasteners, loose joints, broken parts, or torn mesh/fabric. If
you experience any of these problems, please contact Lamont Home
Customer Service at 800-553-5621 from 8am-4:30pm CST, M-F.
• DO NOT substitute any parts.
• Keep unassembled parts out of the reach of children.
• is product is for one time use only. DO NOT store for re-use or buy
second hand.
• FALL HAZARD – To help prevent falls, DO NOT use this product
when the infant begins to push up on hands and knees or has reached
manufacturer’s recommended maximum weight of 15 lbs., whichever
comes rst.
• is product is intended for a child who is 3 months old or less.
• NEVER leave a baby unattended in a bassinet if there are other children
or animals present.
• NEVER allow children or pets to hang on the side of the bassinet or
climb into or onto this product.
• DO NOT use in a motor vehicle.
• is product is NOT intended to slide or rock.
800-553-5621 • www.lamontlimited.com
CONSUMER INFORMATION
SAFETY WARNINGS
!
LAMONT HOME
Bassinet Assembly Instructions
page 4

• DO NOT move or carry the bassinet with the infant inside of it.
• DO NOT use bassinet on a table or other elevated surface.
• SUFFOCATION HAZARD: Infants can suocate:
• In gaps between an extra pad and side of the bassinet.
• On so bedding.
• NEVER add a mattress, pillow, comforter or padding. Use ONLY the pad
provided by the manufacturer.
• If a sheet is used with the pad, use only the one provided by the manufacturer
or one specically designed to t the dimensions of the bassinet.
• WARNING - Prevent possible strangulation or entanglement. NEVER use
crib sheet or cover unless it ts securely on crib mattress.
• ONLY use a mattress that is long and wide enough so the gap between the
mattress and the two sides forming one corner of the bassinet is NO MORE
THAN 25 mm (1 inch) when the mattress is pushed into the opposite corner
of the bassinet.
• NEVER use plastic shipping bags or other plastic lm as a mattress cover not
sold and intended for that purpose as this may cause suocation.
• Strings can cause strangulation!
DO NOT suspend strings over a product or
attach strings to toys.
DO NOT place items with a string around a child’s
neck, such as canopy strings or pacier cords.
•
DO NOT place bassinet near a window where cords from blinds or drapes
may strangle a child. Child may also fall out of window.
•
DO NOT place cords, straps or similar items that could become wound
around a child’s neck in or near the bassinet.
•
DO NOT place bassinet near a radiator, stove or other heat or ignition source
that could cause overheating of child or may ignite bassinet/bedding.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be
placed on their back to sleep unless otherwise advised by your physician.
• Use bassinet with only one child in it at a time.
CONSUMER INFORMATION
(continued)
SAFETY WARNINGS
!
LAMONT HOME
Bassinet Assembly Instructions
page 5
800-553-5621 • www.lamontlimited.com

STEP #1 PARTS IDENTIFICATION
• Important - Please remove all parts from the package and identify them
prior to beginning assembly.
• Tools Needed - Flat or Phillips head screwdriver and an adjustable wrench,
7/16 inch wrench or a pair of pliers.
Bassinet Body
1 ea.
Canopy Frame
1 ea.
Leg
2 ea.
Curved Floor Rail
2 ea.
Straight Rail
2 ea.
LAMONT HOME
Bassinet Assembly Instructions
Liner Set
includes mattress tted cover,
bassinet liner and canopy cover.
May also contain optional ribbon
belts and bows.
page 6
800-553-5621 • www.lamontlimited.com

LAMONT HOME
Bassinet Assembly Instructions
Mattress Pad
1 ea.
Shelf Board
1 ea.
page 7
800-553-5621 • www.lamontlimited.com
1-1/4 inch Screw - 4 ea.
3/4 inch Screw - 4 ea.
1/4 inch Nut - 8 ea.
2-3/4 inch Screw - 4 ea.
Shown actual size

STEP #2 ATTACH LEGS TO BASSINET BODY
LAMONT HOME
Bassinet Assembly Instructions
1) Turn bassinet body upside down.
2) Pick up and position the leg with the two oval leg sockets facing the center
of the bassinet body.
3) Push hole tabs on the leg over the hole tab on the bassinet body bottom.
4) Place 1-1/4 inch screw through the hole tabs of the leg and the bassinet
bottom. Place a nut onto the screw and tighten until snug.
5) Repeat the screw and nut process to the other side of the leg.
6) Repeat the entire process with the 2nd leg.
7) Check to conrm all screws and nuts are snug tight.
800-553-5621 • www.lamontlimited.com
page 8 Shown actual size

STEP #3 ATTACH STRAIGHT RAILS
LAMONT HOME
Bassinet Assembly Instructions
1) e bassinet body is upside down.
2) Attention! Please follow the details of this step very closely.
3) Pick up the straight rail and align the teardrop shaped end with the leg
socket. e top of the straight rail should be at like the letter “T”.
If it is not, turn the rail end to end and align the teardrop shaped end on
the straight rail with the leg socket. Be sure to attach rails correctly.
4) Insert the teardrop shaped end of the straight rail into the leg socket, insert
3/4 inch screw through the leg and straight rail, place a nut onto screw
and tighten until snug.
5) Repeat the screw and nut process to the other side of the straight rail.
6) Repeat entire process with the 2nd straight rail.
7) Check to conrm all screws and nuts are snug tight.
page 9
800-553-5621 • www.lamontlimited.com
leg socket
teardrop
shaped end
at side up
Shown actual size

LAMONT HOME
Bassinet Assembly Instructions
1) Turn bassinet body right side up.
2) Place the shelf board between the straight rails and the legs.
3) Gently push downward on the shelf until the shelf is seated on the ledges
of the straight rails and the legs.
STEP #4 ATTACH SHELF
page 10
800-553-5621 • www.lamontlimited.com
leg ledge
straight rail ledge

STEP #5 ATTACH CURVED FLOOR RAILS
LAMONT HOME
Bassinet Assembly Instructions
1) Lay the curved oor rails along both sides of the bassinet so that the rails
curve in towards the center of the bassinet body.
2) Put each foot of the legs into the slots on the top of both curved oor rails.
3) Place a 2-3/4 inch screw through the hole in the leg and into the hole in
the top of the curved rail and tighten until snug.
4) Repeat the screw attachment process three (3) more times.
5) Check to conrm all screws are snug tight.
800-553-5621 • www.lamontlimited.com
page 11
Shown actual size

STEP #6 INSTALL BASSINET BODY LINER
Lamont HomeTM recommends laundering rst, per care instructions.
LAMONT HOME
Bassinet Assembly Instructions
1) Identify the liner set bag and remove the largest piece, the bassinet liner.
2) Find the two —1 inch slits in the bassinet liner, position the liner as
shown in the diagram, using the round molded buttons on the bassinet
top frame, and the two warning labels sewn onto the liner.
3) Place each liner slit around each of the molded buttons on the top of the
bassinet body.
4) Work the liner around the body so that all of the rues are on the outside
of the bassinet body.
molded buttons
800-553-5621 • www.lamontlimited.com
page 12 foot of bassinet

LAMONT HOME
Bassinet Assembly Instructions
STEP #7 INSTALL MATTRESS COVER
Lamont HomeTM recommends laundering rst, per care instructions.
1) Remove mattress tted cover from liner set bag.
2) Place the mattress cover onto the mattress pad just like you would put a
tted sheet on a mattress.
3) Position it in the bottom of the bassinet body.
4) Ensure that it ts snugly and securely.
800-553-5621 • www.lamontlimited.com
page 13

STEP #8 ATTACH CANOPY COVER TO CANOPY FRAME
Lamont HomeTM recommends laundering rst, per care instructions.

 
1) Identify the canopy frame and the canopy liner from the liner set (it is the
only fabric piece le that has rues).
2) Position the canopy frame and the canopy liner as shown in the 1st drawing.
e rued edge of the canopy liner is in your le hand and the latch side of
the canopy frame is by your right hand.
3) Pull elastic loop of the canopy liner over ‘U’ shaped end of the canopy frame.
4) Work the canopy liner along both edges of the canopy frame as shown in
the 2nd drawing.
5) Pull the second elastic loop of the canopy liner over ‘U’ shaped end of the
bassinet canopy frame as shown in the 3rd drawing.
elastic strap
latch
LAMONT HOME
Bassinet Assembly Instructions
800-553-5621 • www.lamontlimited.com
page 14

STEP #9 ATTACH CANOPY ASSEMBLY TO BASSINET BODY
1) Position the ‘U’ shaped ends of the canopy frame with liner over the
molded buttons on the top inside edge of the bassinet body.
2) Make sure that the latch on the canopy frame is between the molded
buttons and the short end of the bassinet.
3) Push the ‘U’ shaped ends of the canopy frame onto the molded buttons
and rotate the canopy frame down so the latch will grab the inside of the
bassinet frame.
4) e canopy will not rotate when properly latched.
latch
LAMONT HOME
Bassinet Assembly Instructions
800-553-5621 • www.lamontlimited.com
page 15

STEP #10 RIBBON BELT AND BOW INSTALLATION
(May be required on some models)
1) Identify the ribbon belt and bow you would like to use from the liner set.
2) Belt loops are located around the top edge of the bassinet body. Find the
belt loop opposite the canopy end and start the ribbon through the loop.
3) Pull the ribbon through the remaining belt loops around the top of the
bassinet body. It is very important not to miss any loops.
4) Attach the two ends of the ribbon to each other by using the hook and loop
fastener on each end of the ribbon, as shown in 1st drawing.
5) Attach the bow to the belt loop at the hook and loop fastener end where
you started and stopped threading the ribbon, as shown in 2nd drawing.


LAMONT HOME
Bassinet Assembly Instructions
800-553-5621 • www.lamontlimited.com
page 16