KIENZLE ARGO UDS-AT PRO User manual

[phone]
www.uds-at.pro
BA00-3165-00000023 © 2020 Kienzle Argo GmbH. All Rights Reserved. V1.1
The most important information at a glance
UDS push-button with backlight
Event LED ( flashes, steady glow)
Acoustic signal ( beep)
Backlight Meaning / what to do
Off / Power saving mode
Active
Notice!
Please note any messages.
Malfunction!
Please note any messages.
Special mode of operation
Messages after ignition is switched ON
After the ignition is switched on, the UDS-ATPRO performs a self-test and indicates its
operational status.
Backlight Event LED Beep Meaning / what to do
2x The UDS-ATPRO is ready for operation.
2x Latest standstill event – can be upgraded by pressing a
button.
1x Latest event – can be upgraded by pressing a button.
2x The UDS-ATPRO has registered a serious event.
A data readout is advised.
5x long The voltage of the internal buffer battery is too low.
Please consult a specialist garage.
10x The UDS-ATPRO has registered too many serious events.
Please have data read out and deleted.
S O S
…_ _ _…
Malfunction!
Please consult a specialist garage if this recurs.

[phone]
www.uds-at.pro
BA00-3165-00000023 © 2020 Kienzle Argo GmbH. All Rights Reserved. V1.1
Messages during operation
Backlight Event LED Beep Meaning / what to do
or
2x The UDS-ATPRO has registered a standstill event – can
be upgraded by pressing a button.
1x The UDS-ATPRO has registered an event – can be
upgraded by pressing a button.
No valid GNNS signal.
1x long Malfunction!
Please consult a specialist garage if this recurs.
Upgrading events
Backlight Event LED Beep Meaning / what to do
2x
2x
Press the UDS push-button once when the power is
switched on.
The UDS-ATPRO has upgraded an event.
Registering events manually
Backlight Event LED Beep Meaning / what to do
5x
Press the UDS push-button once when the ignition is
switched on.
The UDS-ATPRO has registered a manual event.
Ignition OFF
After the ignition is switched off there is a follow-up time before the UDS-ATPRO changes to
power saving mode.
Backlight Event LED Beep Meaning / what to do
1x The UDS-ATPRO is in power saving mode.
Notice Depending on the connection variant, the behaviour of the UDS-ATPRO
may deviate from what is described here.
Service telephone
[phone]