Kimex 133-2060 User manual

Output1 Output2 IR In IR Out
Output2
IR In
IR Out
HDMI Out IR In IR Out
DC/12V Power CAT In RS232
Link
CAT Out
Output1
1
Guide d'installation
Tous les noms de marque et marques déposées
appartiennent à leurs propriétaires respectifs
2
34
SPECIFICATIONS:
CONNEXION :
•1 x émetteur d'extension HDMI
•1 x récepteur HDMI Extender
•1 x alimentation DC 12V / 2A (CW1202000EU)
•2 x émetteur IR (IRE 120cm avec mousse de caoutchouc)
•2 x récepteurs IR (IRR 100cm avec caoutchouc mousse)
•2 x Phoenix Plug pour terminaison de câble RS232
•1 x manuel d'instructions
•4 pieds de support en forme de L
•8 x vis
PACKAGE :
133-2060
Extender HDMI 2.0 over cat6, 6a,7,
UHD 4K/60Hz
• Compatible HDMI 2.0, HDCP 2.2 / HDCP 1.4 et DVI 1.0
• Le signal 4k2k @ 60Hz 4: 4: 4 étend la distance jusqu'à 60 mètres sur un seul
câble Cat.6
• Prend en charge la résolution Ultra HD 4K2K @ 60Hz, 4: 4: 4
• Prend en charge HDR (High Dynamic Range)
• IR bidirectionnel pris en charge
• Prend en charge la sortie de boucle locale et la mise en cascade
• Prise en charge du mixage EDID pour une meilleure compatibilité
• Offre une distribution simple et rapide des signaux vidéo HDMI - positionnez vos
moniteurs où vous le souhaitez
• Résolutions: 4K2K (60Hz), 4K2K (30Hz), 1080p, 1080i, 720p, 576p, 576i, 480p,
480i
• Taux de transfert maximum: affichage de l'état par LED de 18 Gbps
• Profondeur de couleur: 12 bits
• Prend en charge les signaux audio compressés, tels que DTS Digital, Dolby Digital
(y compris DTS-HD et Dolby True HD)
• Prend en charge les signaux audio non compressés tels que LPCM
• Taille compacte, utilisation et installation simples
• Prend en charge la fonction PoC (Power over Cable), cela signifie que l’émetteur
est alimenté par un adaptateur secteur 12V, l’autre n’a pas besoin d’alimentation.)
Performance
format vidéo
format Audio
Conformité HDMI
Conformité HDCP
Connecteurs sur l'émetteur
Input
Output
IR
Connecteurs sur le récepteur
Input
Output
IR
Exigences environnementales et d'alimentation
Température de fonctionnement
Humidité de fonctionnement et
de stockage
4K2K (60HZ), 4K2K (30HZ),
480i/480p/576i/576p/720p/1080i/1080p
LPCM; DTS Digital, Dolby Digital (including
DTS-HD and Dolby True HD)
HDMI 2.0
HDCP 2.2/HDCP1.4
1xHDMI port
1x RJ45 output , 1xHDMI port
Support 20K-60KHz
1x RJ45 input
Support 20K-60KHz
0 to +40℃
Plage 5 à 90% HR (sans condensation)
Loop Out HDMI In IR In IR Out
HDMI OutCAT Out IR In IR Out
DC/12V CAT RS232
Link
Power
DC/12V CAT RS232
Link
Power
CONNEXION :
1 2
3
56 7 8 9 10 11
IR Blaster
IR Receiver
IR Blaster
IR Receiver
TX
RX
Connectez-vous à
un autre récepteur
DC 12V
Power Input
Cat.6/6A/7 Cable
Cat.6/6A/7
Cable
PC ou Notebook
PC ou Notebook
HDMI Source
PS3,PC,STB,
Blu-ray DVD player etc
TV-4K@60 4:4:4
TV-4K@60 4:4:4 TV-4K@60 4:4:4
HDMI Out
HDMI Out
HDMI In
INTRODUCTION :
Ce prolongateur HDMI peut étendre la distance de transmission maximale du signal
HDMI jusqu'à 60 m, seul un simple câble réseau étant utilisé entre un émetteur et un
récepteur. L'ensemble d'extendeurs KIMEX 4K, 4K60Hz 4: 4: 4 offre une solution
d'extension jusqu'à 60 m pour les exigences les plus élevées - à la fois pour des
graphiques haute résolution et pour une lecture vidéo absolument fluide. Il se compose
d'un émetteur et d'un récepteur. Il comprend également deux paires d'unités
infrarouges (émetteur, récepteur) qui permettent l'utilisation de la télécommande pour
réaliser un contrôle bidirectionnel entre l'expéditeur et le récepteur. L'émetteur a une
sortie de boucle locale, vous pouvez surveiller l'état de lecture de l'appareil localement.
Et le récepteur a une sortie en boucle avec RJ45, puis deux ou max. huit récepteurs
sont en cascade, ils peuvent créer une distribution plus grande et plus longue en
longueur.
FONCTIONNALITÉS :
1x RJ45 output , 1xHDMI port
1 Loop Out: connexion à un périphérique d'affichage HDMI local tel qu'un téléviseur UHD ou un
projecteur
2 HDMI In: connexion à un appareil source HDMI tel qu'un lecteur DVD ou PS4
3 CAT Out: connectez-vous à un autre récepteur via un câble nework (CAT.6,6a, 7)
4 Sortie HDMI: connexion à un périphérique d'affichage HDMI distant tel qu'un téléviseur UHD ou un
projecteur
5 Entrée IR: connexion au câble du récepteur IR large bande. Le signal IR sera envoyé à la sortie IR
port d'une autre unité
6 Sortie IR: connectez le câble IR Blaster à large bande. Le signal IR provient du port IR In de une autre
unité
7 DC / 12V: branchez l'alimentation DC 12V dans l'unité et connectez l'adaptateur au secteur
(Remarque: le répéteur prend en charge la fonction PoC, cela signifie que l'expéditeur ou le récepteur
est alimenté par un adaptateur secteur 12V, l'autre n'a pas besoin d'alimentation.)
8 LED d'alimentation: la LED d'alimentation s'allume lorsque l'unité est sous tension.
9 LED Link: la LED Sender Link s'allumera lorsqu'une connexion valide a été établie pour la sortie en
boucle et le voyant ReceiverLink s'allumera Lorsqu'une connexion valide a été établie pour la sortie
HDMI
10 CAT: connectez l'expéditeur et le récepteur via un câble nework (CAT.6,6a, 7)
11 RS232: passer par le signal RS232
4

Output1 Output2 IR In IR Out
Output2
IR In
IR Out
HDMI Out IR In IR Out
DC/12V Power CAT In RS232
Link
CAT Out
Output1
1
Quick Installation Guide
Ver. 1.0
All brand names and trademarks are properties of
their respective owners
2
34
SPECIFICATIONS:
CONNECTION DIAGRAM:
• 1 x HDMI Extender transmitter unit
• 1 x HDMI Extender receiver unit
• 1 x DC 12V/2A power supply (CW1202000EU)
• 2 x IR emitter (IRE 120cm with foam rubber)
• 2 x IR receiver (IRR 100cm with foam rubber)
• 2 x Phoenix Plug for RS232 cable termination
• 8 x Screws
• 1 x Instruction manual
• 4 x L shape stand feet
PACKAGE CONTENTS:
HDMI 2.0 Extender with Loop out, 60m
over network cable (Cat 6,6a, 7), UHD
4K2K/60 Hz 4:4:4
•HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
•4k2k@60Hz 4:4:4 signal extends distance up to 60 meters over a single Cat.6 cable
•Supports Ultra HD resolution 4K2K@60Hz,4:4:4
•Supports HDR(High Dynamic Range)
•Bi-directional IR supported
•Supports Local Loop Output and cascading
•Support for mixing EDID for better compatibility
•Offers simple and quick distribution for HDMI video signals - position your monitors
wherever you wish
•Resolutions: 4K2K (60Hz), 4K2K (30Hz), 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
•
LED status display
•
Max transfer rate: 18 Gbps
•Color depth: 12 bit
•Supports compressed audio signals, such as DTS digital, Dolby digital (including
DTS-HD and Dolby True HD)
•Supports uncompressed audio signals such as LPCM
•Compact size, simple use and installation
•Supports PoC (Power over Cable) function, it means that either Sender is powered
supply by a 12V power adapter, the other doesn’t need power supply.)
Performance
Support Video format
Support Audio format
HDMI Compliance
HDCP Compliance
Connectors on Transmitter
Input
Output
IR
Connectors on Receiver
Input
Output
IR
Environmental & Power Requirements
Operating temperature
Operating and storage
humidity
4K2K (60HZ), 4K2K (30HZ),
480i/480p/576i/576p/720p/1080i/1080p
LPCM; DTS Digital, Dolby Digital (including
DTS-HD and Dolby True HD)
HDMI 2.0
HDCP 2.2/HDCP1.4
1xHDMI port
1x RJ45 output , 1xHDMI port
Support 20K-60KHz
1x RJ45 input
Support 20K-60KHz
0 to +40℃
Range 5 to 90%RH (No Condensation)
Loop Out HDMI In IR In IR Out
HDMI OutCAT Out IR In IR Out
DC/12V CAT RS232
Link
Power
DC/12V CAT RS232
Link
Power
1 Loop Out: Connect to a local HDMI display device such as UHD TV or Projector
2 HDMI In: Connect to HDMI source device such as DVD or PS4 player
4 HDMI Out: Connect to Remote HDMI display device such as UHDTV or Projector
5 IR In: Connect to wideband IR Receiver cable. The IR signal will send to the IR Out
port of another unit
6 IR Out: Connect to wideband IR Blaster cable. The IR signal is from the IR In port of
another unit
7 DC/12V: Plug DC 12V power supply into the unit and connect the adapter to AC
outlet.(Note: The extender supports PoC function, it meansthat either Sender or
Receiver is powered supply by 12V power adapter, the other doesn’t need power
supply.)
8 Power LED: The Power LED will illuminate when the unit is powered on.
9 Link LED: The Sender Link LED will illuminate When a valid connection has been
established for the Loop Out,and the ReceiverLink LED will illuminate When a valid
connection has been established for the HDMI Out
10 CAT: Connect Sender and Receiver over a nework cable(CAT.6,6a,7)
11 RS232: pass through the RS232 signal
CONNECTION DIAGRAM:
1 2
3
56 7 8 9 10 11
IR Blaster
IR Receiver
IR Blaster
IR Receiver
TX
RX
Connect to another
Receiver
DC 12V
Power Input
Cat.6/6A/7 Cable
Cat.6/6A/7
Cable
PC or Notebook
PC or Notebook
HDMI Source
PS3,PC,STB,
Blu-ray DVD player etc
TV-4K@60 4:4:4
TV-4K@60 4:4:4 TV-4K@60 4:4:4
HDMI Out
HDMI Out
HDMI In
INTRODUCTION:
This HDMI extender can be extends the maximum transmission distance for HDMI signal
to up to 60m whereby only a simple network cable is used between a Sender and
Receiver unit.
The KIMEX 4K Extender Set, 4K60Hz 4:4:4 offers an extender solution of up to 60m for
the highest demands - both for high-resolution graphics and for absolutely smooth video
playback. It consists of a transmitter as well as a receiver unit. It also includes two pairs
infrared units (transmitter, receiver) which enable the use of the remote realize
bidirectional control between Sender and Receiver.
The Transmitter have a Local Loop Output , You can monitor the playback status of the
device at locally. And the Receiver have a Loop Output with RJ45,then two or max. eight
receivers are cascaded, they can create a larger distribution and longer in length.
FEATURES:
1x RJ45 output , 1xHDMI port
3 CAT Out: Connect to another Receiver over a nework cable(CAT.6,6a,7)
4
Table of contents
Languages: