kincrome P12075 User manual
IMPORTANT SAFETY INFORMATION
The useofvehicle support stands has inherent dangers toavoid risk of personal injuryor propertydamage
makesureyouarefullyawareoftheoperatinginstructionsforthisproduct,therecommendationsinthe
vehicleownersmanualforjackingofyourvehicleandthesafeusageinstructionforthejackyouwilluse;
allpriortoliftingthevehicle. Donotexceedmaximumworkingloadlimitofthesesupportstands.These
stands are intended for automotive useonly. Beaware that largeorheavy vehicles mayexceed the stands
stated capacity check vehicle owners manual or contact the vehicle manufacturer. Donotuseforanyother
purposeexceptthesupportingofaraisedvehicle,neverusetosupportanystructureorbuilding,donot
supportanyhumanload.
UNPACKINGANDASSEMBLING
Unpacking Carton
Placecartoninaclear,open areasuchasgaragefloor. Remove supportstandbasesanduppercolumns
from carton.
Assembly
Placeabasesecurelyonthefloor. Inserttheuppercolumnintothe
lowersection ofbase. Liftthe handleand slowly insertthe column as
farasitwillgo. Becarefulnottodropthecolumnandbeawaretonot
trapfingers. Raisethecolumnuntilthedesiredheightisreached,
make sure the handle has returned to itsnatural position and the pawl
hasfullyengagedtheteethontheuppercolumn
-
donotexceedthe
maximumheightraisedofthevehiclesupportstand.
Oncethecolumnisinsertedlocatetheholedrilledinthebottomof
theupright.Usingasmallpunchandhammerinsertthesplitpin
provided, the split pinwill protrude onone side ofthe upper column,
the pinistopreventthe column being removed from the base.
Repeatforbothstands.
Preparing WorkArea
Before using vehicle support stands and a jack to lift vehicle, itis important to prepare work area properly.
Follow this procedure each time a jack and support stands are used to help prevent property damage and
orseriousinjury.
1.) Thoroughly inspect vehicle support stands for damage orwear before each use. Briefly test operation of
unloadedstandsbeforeusingtosupportanyload. Ifvehiclesupportstandsaredamagedorare
malfunctioning DONOTUSETOSUPPORTANYLOADuntiltheproblemiscorrected
Warranty given by Kincrome Australia Pty Ltd of 3 Lakeview Drive, Caribbean Park, Scoresby, Victoria (Tel 1300 657 528). If this product has
materials or workmanship defects (other than defects caused by abnormal or non warranted use) you can , at your cost, send the product to
place of purchase, an authorized Kincrome service agent or one of Kincrome's addresses for repair or replacement. Your rights under this
warranty are in addition to any other rights you have under the Australian Consumer Law or other applicable laws. Our goods come with
guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a major failure.
For further details please visit www.kincrome.com.au or call us
Distributed byKincrome Toolsand Equipment
www.kincrome.com.au
3 Lakeview Drive Scoresby Victoria
Phone: 1300 657528
Table of contents
Other kincrome Rack & Stand manuals
