kincrome K7107 User manual

PARTS OVERVIEW
2.Long Double Rivet Beam (DRB) 3.Short Double Rivet Beam
4.Long Single rivet beam (SRB)
Assembly Instructions
Mobile storage rack MADE IN CHINA
Model No.: K7107 6.Medium bin
Dimension: 85.5*39*169.5cm Tool Required: Rubber Mallet
Safet
y
Rules and Instructions
1. The mobile storage rack must be assemble and used on a level surface. 9.Wire Deck for Big Bins
2.Evenly distribute the weight of load on each shelf, place the heaviest items on the
bottom shelf.
Do not overload.
3.DO NOT STAND ON OR USE THE UNIT AS A LADDER.
4. Should there ever be a need to change the level of the shelf, be sure to disassemble 12 Caster with brake 13 Caster without brake
and reassemble one level at a time. Contents
5.Use a mallet to drive the rivet to the bottom of slots on the post. Hit the beam close Item Discrition Q'ty Item Discrition Q'ty
to the connection. 1 Angel post 4 8 Top wire decking 1
6. Be sure that the rivets seat at the bottom of the slot. 2 Long Double rivet beam 6 9 Wire decking for big bins 3
7.To facilitate assembly we recommend having two persons assemble the rack. 3 Short Double rivet beam 10 10 Wire Deck for Medium Bins 3
4 Long Single rivet beam 14 11 Wire Deck for Small Bins 3
5 Big bin 9 12 Caster with brake 2
MADE IN CHINA 6 Medium bin 12 13 Caster without brake 2
Kincrome Australia Pty Ltd 7 Small bin 15
10.Wire Deck for Medium Bins 11.Wire Deck for Small Bins
1. Long Angel Post
5.Big bin 7.Small bin 8.Top wire decking

Assembly Instructions
Tips Step 1 Step 2
1. The posts are directional; Assmble two long posts(1) and Repeat step 1 to continue
the slot's tapered end must two short Double Rivet Beam(3). the assembly until level 7,
face downward. Use the last slot from the Each level is 4 slots higher
2. Tap the beams close to the bottom of the post. Be sure the than the last level.
connection to assure the rivets slot of the beam is facing up. Use long double rivet beam(2)
seat at the bottom of the slot. Tap the beams close to the on the bottom two level, and
3. When assembling the beams connection and assure the rivets long single rivet beam(4) on
the slot of the beam must face are seated at the bottom of the other levels.
up to assure that the decking the slot. Laying the big bin wire And only level 1, 3, 5, 7
sits leveled. decking (9) on the bottom level. need to add the short beams(3)
to enhance the construction.
Step 3 Step 4 Step 5
It is better to put the wire decking Continue the assembly with two Screw the four casters(12)
on the desired place before long single rivet beams (4), (13) at the bottom of the
assemble the higher level. The level 8 is two slots higher than four posts.
The big bin wire decking(9) suit level 7. Add the top wire decking(8)
for the bottom three level, the From the level 7, put the small bin on the rack.
medium bin wire decking(10) wire decking(11) on the beams. Then put the three kinds of
suit for the middle three level. Repeat this step until the top level. bins on the desired place.
Add the short beam(3) on the top
level.
SRB
SRB
SRB
SRB
SRB
DRB
DRB
SRB
SRB
SRB
SRB
SRB
DRB
DRB
SRB
SRB
DRB
DRB
SRB