USERS WITH MULTIPLE GROW LIGHTS WITHIN ONE ROOM:
Follow the process that you have just completed for each light
that you intend to control using a single Command Center.
Once all light have been connected to the WIFI network, you will
see a list of all connected lights in the “KIND FARM”section of the
Command Center. If all connected xtures do not appear on this
list, click “refresh” to automatically update the list.
USERS WITH MULTIPLE GROW ROOMS:
For grow operations with multiple rooms, it is recommended that
each room have a dedicated router or network for the lights in
that room to connect to, and be controlled by.
SETTING THE CLOCK:
On the Dashboard of the Command Center, nd the Time and
Date display and click“Edit” . Use this window to set the current
time and date of your location.
For users with multiple lights, use the KIND FARM section of the
Command Center. Select all xtures.
TESTING:
To run a test on the KIND FARM: in the results tab, select set
spectra channels in the drop down menu, set all three spectra
channels to 100 percent, then click “update all”
All connected lights should power on to 100%
Secondary test: Set all spectra to 0% and click “update all”
All lights should return to the o setting.
8
K5 WiFi SERIES SETUP
