kinetic CIR24B-420 User manual

CIR24B Series
Color I.R Camera
Weather Resistant Day & Night
IR Color Camera
Specification
Model CIR24B-420 / 540 ick Up Element 1/3″ SONY CCD SENSOR Effective icture
Elements ( H*V ) NTSC:768×494, PAL:752×582
Horizontal Resolution 420 TV L nes / 540 TV L nes S/N Ratio Clock Frequency (MHZ) NTSC:19.0699 , PAL:19.3125
Scanning System 2:1 nterlace Minimum Illumination 0 Lux (w th IR LED ON)
Synchronous System Internal, Negat ve sync. Auto Electronic Shutter NTSC:1/60s~1/100,000s,PAL:1/50s~1/100,000s Gama Characteristic 0.45
Video Output 1Vpp,75 Ω
Auto Gain Control Auto ower////Current 12VDC(±10%)/400mA
Lens 3.6 mm (Opt onal)
Dimension (mm) 175(W)×124(H)×83(D)
Weight (g) 900
Storage Temperature -30~ +60℃ RH95% Max
Operating Temperature -10~ +50℃ RH95% Max
More than 48dB
IR Distance 18 Meters ( w th 24 Un t Infrared LED)
IR Status Under 10 Lux by CDS
IR ower On CDS Auto Control
Water Resistance IP66
acking List
No Name Model Number 2. UserGu de CIR24B
Ser es 1 1. Weather Proof Day & N ght IR
Camera
CIR24B 1
D str butor:
Notes: : : : Before applying power to the
camera, please read this User Guide in
detail!
Do not attempt to d sassemble the camera.
If the camera does not work, please contact
your local d str butor or K net c CCTV

INTRODUCTION
Congratulat ons on your purchase of th s weather
res stant, day & n ght I.R camera.
The camera offers h gh def n t on, mage stab l ty,
strong ant -jamm ng, w th r ch and real colours. F x ng and us ng th s model are conven ent too.
The camera s easy to nstall however please read
th s nstruct on manual carefully to ensure proper use of
the product.
CONNECTING
BRIEF OF RODUCT
* * * * Sensor ((((CCD)))) Adopts 1/3" Sony mage sensor.
* * * * Auto Gain Control (AGC)
Bu lt- n auto ga n control (AGC) c rcu t. The color camera
ach eves h gh def n t on mages n low Lux cond t ons.
* * * * Auto Electronic Shutter (AES)
Bu lt- n auto electron c shutter funct on. The color
camera’s AES speed can reach 1/100,000s.
* * * * Gama Characteristic
Camera Gamma character st c s 0.45.
* * * * Scanning Mode
NTSC or PAL mode. * * * * Night-time Vision 0 Lux w th IR LED ON. Adopts Ta wanese h gh qual ty IR
LED, hav ng very good n ght-v s on effect veness.
DC12V ower Supply
Mon tor CIR24B
TROUBLE SHOOTING
L nk w re rule：
ower Video Note: : : : ● Please note the camera’s operat ng temperature and ts us ng
env ronment requ rement. Avo d us ng the camera at too h gh or
too low temperatures. The operat ng temperature s -10C-50C.
(Recommendatory operat ng temperature s -5C to -40C.) ● Never po nt the camera at the sun or br ght object. Otherw se, t
1. No icture after providing power
. Poss bly due to power supply voltage abnorm ty, please check the power
supply voltage and connect on polar ty. . Please check all the connect ng cables and your d splay mon tor
2. The picture interference ripples
. May be caused by power supply AC r pples or other earth ng ssues.
Try us ng a ground loop solator. . Also check the mon tor and per pheral equ pment used.
3. The picture background color changes continuously
. The fluorescent lamp’s electromagnet c f eld can cause color roll. Th s s a
normal phenomenon of CCTV cameras.
. Reduc ng the fluorescent lamp numbers or ncreas ng the d stance between
the camera and the fluorescent lamps may mprove t.
. Use power supply external sync. camera to resolve t.
4. icture smear
. The power supply’s voltage s unstable. . Connect ng cables not connected correctly or h gh mpedance ssues.
To prevent f re or shock hazarded. Do not expose the un t
The symbol s ntended to alert the user to the presence of
The symbol s ntended to alert the user to the presence of
d rectly nto water for too long a per od.
mportant operat ng and ma ntenance (serv c ng)
Instruct ons n the l terature accompany ng the appl ance.
un nsulated ‘dangerous voltage’ w th n the product’s
enclosure that may be of suff c ent Magn tude to const tute
a r sk of electr c shock to persons.
Notes::::
●Only use a su table regulated low voltage power supply w th the correct
output voltage, current output and operat ng temperature.
Ensure correct connect on polar ty s adhered to or you WILL damage
the camera. V deo 12V DC
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOC DO NOT REMOVE COVER,OR
DAMAGE USER, SERVICEABLE ARTS INSIDE.
REFER SERVICING TO OUALIFIED SERVICE ERSONNEL.
RISK OF ELECTRIC. DO NOT O EN
CAUTION:
To prevent electric shocks and risk of fire hazards,
do NOT use other than specified power source.