kinetic KVDM-580IR(W) User manual

IR Day & Night
IR Vandal Resistant Dome Camera
사용 설명서 용 서 그림변경
KVDM
KVDMKVDM
KVDM
-
--
-
580IR(
580IR(580IR(
580IR(
W)
W)W)
W)
MANUAL

Ultra High Resolution 580 TV Lines
Clear image quality has been achieved by employing a SONY CCD with 10,000(effective)
pixels, which provides a horizontal resolution of 580 TV lines.
Excellent Sensitivity
The built-in high sensitivity COLOR CCD enables a clear image even in 0Lux (B/W, IR-LED ON)
Electrical Day & Night IR-LED)
The camera identifies whether it is day or night and automatically switches to the
appropriate mode, depending on its environment. By day, the camera switches to color
mode (IR LED off) in order to maintain optimal color. At night, it switches to B/W mode (IR
LED ON) so as to obtain better picture definition.
Motion Detection
Since the camera detects motion and generates signals without any additional external
sensors, you can monitor activity more efficiently by connecting the camera to an alarm
device.
D-WDR
Built-in Digital WDR
3D-DNR
The high performance New DSP chip dramatically reduces the gain noise in digital image
processing, producing clear, sharp images in low lighting environment. It provides the
further optimized DNR performance.
Controlled by OSD Menu
The camera can be controlled by selecting text displayed on the monitor screen.
Additional Functions
HSBLC (High Suppress Back Light Compensation), SYNC (INT/LL), SENS-UP, FREEZE,
Mirror (H,V-FLIP,ROTATE), D-ZOOM, Negative Image, Sharpness, Motion Detection and
Privacy functions are provided.
1. Features

3
1) Cable Connection
2) OSD Control
①①①① 3AXIS BRACKET
- Please loosen screws and fix tilted and panned position.
③③③③ LENS : Vari-Focal Auto Iris Lens 2.8mm ~ 12.0mm / F1.2 ) with ICR
③③③③ OSD PCB
- SETUP button : Used for the menu display. This button can be used to confirm
settings after changing the value of the selected function or current conditions.
- UP & DOWN buttons : Used for selecting items by moving the cursor up or down
on the menu screen.
- LEFT & RIGHT buttons : Used when changing item values, by moving the cursor
to the left or right on the menu screen
2. Cable Connection & OSD Control

4
• Menu Structure
LENS DC / MANUAL
SHUTTER
BRIGHTNESS
AGC OFF / LOW / MIDDLE / HIGH
SENSE-UP AUTO / OFF
BLC OFF / BLC / HSBLC
D-WDR OFF / INDOOR / OUTDOOR
EXPOSURE
RETURN
WHITE BAL
ATW / AWB / AWC-SET / MANUAL / INDOOR / OUTDOOR / ATW-L
DAY NIGHT
EXT / B/W / COLOR
3DNR
OFF / ON
CAM TITLE
D-EFFECT FREEZE / MIRROR / D-ZOOM / GAMMA / MEG.IMAGE
MOTION OFF / ON
PRIVACY OFF / ON
SYNC
LANGUAGE
SPECIAL
RETURN
ADJUST
SHARPNESS / BLUE / RED
RESET
FACTORY RESET
EXIT
3. Setup Menu Operation

5
② Please press the LEFT or RIGHT button if you wish to change mode.
When the LEFT or RIGHT button is pressed, available values and modes are
displayed in order. Please keep pressing the button until you get to the mode you
as you desire.
③ Please select 'EXIT' and then press the SETUP button to finish the setting.
Note
• If appears at the mode you wish to operate, it means that there is a sub-menu which can
be selected by pressing the SETUP button.
• If appears at the mode item, it means that there is no mode available to be selected .
1) LENS
This function is used to adjust the brightness of the
screen.
① When the Setup menu is displayed on the screen,
please position the arrow to point to 'LENS' by using
the up and down buttons.
② Please select the type of the lens you wish to use
by pressing the left or right Button
▶ Manual : MANUAL lens selection
▶ DC : DC Auto Iris lens selection
* Please don’t be selected in MANUAL for IR camera.
③ Please press the SETUP button if you wish to return to the previous menu
Note
• In DC selecting, it can adjust BRIGHTNESS in the sub-menu
with RIGHT button and in MANUAL selecting, it can adjust
BRIGHTNESS at EXPOSURE of menu.
• The brightness can be adjusted within the range of 0 ~ 100.
The optimum level of brightness for the user can be achieved
by adjustment.
SETUP
1. LENS DC↙↙↙↙
2. EXPOSURE ↙
3. WHITE BAL ATW-L
4. DAY NIGHT EXT
5. 3DNR ON↙
6. SPECIAL ↙
7. ADJUST ↙
8. RESET ↙
9. EXIT ↙
Select any function
you wish to operate
by using the UP and
DOWN buttons.
Modes can be
changed using the
LEFT and RIGHT
buttons.
SETUP
▶▶▶▶1. LENS DC↙↙↙↙
2. EXPOSURE ↙
3. WHITE BAL ATW-L
4. DAY NIGHT EXT
5. 3DNR ON↙
6. SPECIAL ↙
7. ADJUST ↙
8. RESET ↙
9. EXIT
↙↙↙↙

6
2) EXPOSURE
When the SETUP menu screen is displayed, select
EXPOSURE by using the Up and Down buttons so
that the arrow indicates EXPOSURE.
Select a desired mode using the UP and DOWN
buttons.
1. SHUTTER
You can select either auto or manual shutter.
▶▶▶▶ FLK: Select this when you experience picture
flicker, which can happen when there is a
clash with the frequency of the installed
lighting.
▶▶▶▶ MANUAL : The shutter speed can be controlled
manually.
▶▶▶▶ 1/60, 1/250, 1/500, 1/2000, 1/5000, 1/10000, 1/100000, x256, x128, x6 , x32, x16,
x8, x , x2 selectable.
2. BRIGHTNESS
When the lens is selected MANUAL, it can be
adjusted BRIGHTNESS.
3. AGC Auto Gain Control)
▶ OFF : Deactivates the AGC function.
▶ LOW : Allows automatic gain control to 1 dB
▶ MIDDLE : Allows automatic gain control to 28dB
▶ HIGH : Allows automatic gain control to 32dB
EXPOSURE
SHUTTER /60
▶BRIGHTNESS ---
AGC MIDDLE
SENSE-UP AUTO↙
SETUP
. LENS DC↙
▶▶▶▶2. EXPOSURE ↙↙↙↙
3. WHITE BAL ATW-L
4. DAY NIGHT EXT
5. 3DNR ON↙
6. SPECIAL ↙
7. ADJUST ↙
8. RESET ↙
9. EXIT
↙
EXPOSURE
▶SHUTTER /60
BRIGHTNESS ---
AGC LOW
SENSE-UP AUTO↙
BLC OFF
D-WDR OFF
RETURN RET↙
EXPOSURE
▶SHUTTER /60
BRIGHTNESS ---
AGC LOW
SENSE-UP AUTO↙
BLC OFF
D-WDR OFF
RETURN RET↙
EXPOSURE
SHUTTER /60
BRIGHTNESS ---
▶▶▶▶AGC LOW
SENSE-UP AUTO↙
BLC OFF
D-WDR OFF
RETURN RET↙

7
4. SENS-UP
▶ OFF : Deactivates the SENS-UP function
▶ AUTO : Activates the SENS-UP function
It can be adjusted x 2 ~ x 256.
5. BLC
Enables a user to directly select a desired area from
a picture, and to view the area more clearly.
● OFF : Not being used
▶
GAIN - Adjust GAIN of BLC area.
(LOW, MIDDLE, HIGH)
▶ DEFAULT - Initializing BLC area.
▶ LEFT / RIGHT - Moving left-right in BLC area.
▶ WIDTH - Adjusting left-right width in BLC area.
▶ TOP / BOTTOM - Moving up-down in BLC area.
▶ HEIGHT - Adjusting height of up-down in BLC
area.
BLC ON BLC OFF
- HSBLC
▶ LEVEL - Adjusting GAIN in HSBLC area(0 <-> 8)
▶ DEFAULT - Initializing HSBLC area
▶ LEFT / RIGHT - Moving left-right in HSBLC area.
▶ WIDTH - Adjusting left-right width in HSBLC area.
▶ TOP / BOTTOM - Moving up-down in HSBLC area.
▶ HEIGHT - Adjusting height of up-down in HSBLC
area.
SENSE
-
UP
SENSE-UP X4
RETURN RET↙
BLC
GAIN MIDDLE
DEFAULT ↙↙↙↙
LEFT/RIGHT IIIIIIIIIIIIIIIIIIIII 2
WIDTH IIIIIIIIIIIIIIIIIIIII 4
TOP/BOTTOM IIIIIIIIIIIIIIIIIIIII 3
HEIGHT IIIIIIIIIIIIIIIIIIIII 3
RETURN RET↙↙↙↙
HSBLC
LEVEL IIIIIIIIIIIIIIIIIIIII 5
DEFAULT ↙↙↙↙
LEFT/RIGHT IIIIIIIIIIIIIIIIIIIII 2
WIDTH IIIIIIIIIIIIIIIIIIIII 4
TOP/BOTTOM IIIIIIIIIIIIIIIIIIIII 3
HEIGHT IIIIIIIIIIIIIIIIIIIII 3
RETURN RET↙↙↙↙
EXPOSURE
SHUTTER /60
BRIGHTNESS ---
AGC LOW
▶▶▶▶SENSE-UP AUTO↙↙↙↙
BLC OFF
D-WDR OFF
RETURN RET↙
EXPOSURE
SHUTTER /60
BRIGHTNESS ---
AGC LOW
SENSE-UP AUTO↙
▶▶▶▶BLC OFF
D-WDR OFF
RETURN RET↙

8
6. D-WDR Digital WDR)
When there are both bright and dark areas at the
same time, this mode makes both areas distinctive.
▶ Off : Deactivates the WDR function
▶ Indoor : Digital WDR suitable for indoor.
▶ Outdoor : Digital WDR suitable for Outdoor.
3) WHITE BALANCE
The screen color can be adjusted by using the white
balance function.
① Please position the arrow to point to 'WHITE BAL'
on the Setup menu by using the up and down
buttons
② Please select the mode you wish to operate by
pressing the Left or right button.
▶▶▶▶ ATW-L: Select this when the image is exposed
according to strong light and irregular illuminance in
environment of installed area.
▶▶▶▶ ATW : Select this when the color temperature is between 2,000°K and 20,000°K
▶▶▶▶ AWB : Select this when the color temperature is between 2,500°K and 9,500°K
▶▶▶▶ AWC→→→→SET : To find the optimal setting for the current luminance environment
in this mode, set the point the camera towards a sheet of white paper
and press the SET button. If the environment changes, read just it.
▶▶▶▶ MANUAL : Select this to fine-tune White
Balance manually. Set White Balance first
by using the ATW or AWB mode. After that
switch to MANUAL mode, fine-tune the White
Balance and then press the SET button.
▶▶▶▶ INDOOR : Fixed setting, adjusting white balance by 3,200°K.
▶▶▶▶ OUTDOOR : Fixed setting, adjusting white balance by 6,300°K.
WHITE BAL MANUAL
▶▶▶▶BLUE IIIIIIIIIIIIIIIIIIIII 5
RED IIIIIIIIIIIIIIIIIIIII 13
RETURN RET↙↙↙↙
EXPOSURE
SHUTTER /60
BRIGHTNESS ---
AGC LOW
SENSE-UP AUTO↙
BLC OFF
▶▶▶▶D-WDR OFF
RETURN RET↙
SETUP
. LENS DC↙
2. EXPOSURE ↙
▶▶▶▶3. WHITE BAL ATW-L
4. DAY NIGHT EXT
5. 3DNR ON↙
6. SPECIAL ↙
7. ADJUST ↙
8. RESET ↙
9.
EXIT
↙

9
Note
• Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWB mode.
When the object’s surroundings have a very high color temperature
(eg, a clear sky and sunset)
When the object’s surroundings are dark, If the camera directly faces a fluorescent light
or is installed in a place where there are considerable changes in illumination, the
WHITE BALANCE function may become unstable .
4) DAY&NIGHT
You can display pictures in color or black and white
with IR LED ON/OFF
①①①① When the SETUP menu screen is displayed,
select ‘DAY / NIGHT’ by using the UP and
DOWN buttons so that the arrow indicates
“DAY NIGHT”.
②②②② Please select the mode you wish to operate by
pressing the LEFT or RIGHT button.
▶▶▶▶ COLOR : The pictures are always displayed in color. (IR LED Off)
▶▶▶▶ EXT : This mode allows you to apply a desired filter to external signals (CdS).
▶▶▶▶ B/W : The pictures are always displayed in
B/W (IR LED ON)
- “burst : If it cannot be synchronizing video
on the monitor in the BW mode of camera, it
turns on.
(When the camera in B/W mode, the WHITE
BALANCE is deactivated.)
If DAY NIGHT mode is AUTO, the AGC is fixed HIGH.
If the pictures are in color, the IR LEDs turn off and if the pictures are in B/W, the IR
LEDs are on.
5) 3DNR
This function reduces the background noise in a low luminance environment.
DAY NIGHT B/W
▶▶▶▶BURST ON
RETURN RET↙↙↙↙
→→→→
3DNR
▶▶▶▶LEVEL IIIIIIIIIIIIIIIIIIIII 50
RETURN RET↙↙↙↙
SETUP
. LENS DC↙
2. EXPOSURE ↙
3. WHITE BAL ATW-L
▶▶▶▶4. DA NIGHT EXT
5. 3DNR ON↙
6. SPECIAL ↙
7. ADJUST ↙
8. RESET ↙
9. EXIT
↙
SETUP
. LENS DC↙
2. EXPOSURE ↙
3. WHITE BAL ATW-L
4. DAY NIGHT EXT
▶▶▶▶5. 3DNR ON↙↙↙↙
6. SPECIAL ↙
7. ADJUST ↙
8. RESET ↙
9. EXIT
↙

10
▶
ON : Activates 3DNR so that noise is reduced. Set the 3DNR mode to ‘'ON’' and press
the SET button. Then you can adjust the noise reduction level.
▶ OFF : Deactivates 3DNR. Noise is not reduced.
6) SPECIAL ①①①① Please position the arrow to point to 'SPECIAL'
on the SETUP menu by using the UP and
DOWN buttons.
②②②② Please select the mode you wish to operate by
pressing the UP or DOWN button
1. CAM TITLE
If the TITLE is input, the camera TITLE appears on the monitor
① Please position the arrow to point to 'CAMERA TITLE' by using the UP or DOWN
button.
② Please select 'ON' by pressing the LEFT or RIGHT button.
③ Please press the SET button.
④ Up to 15 letters can be used for the ID.
- Please move the cursor to the letter you wish to choose by using the UP and
DOWN button.
- Select an ID from A,B~Y,Z, 0,1~8,9 by using the UP, DOWN,LEFT and
RIGHT buttons.
- Please lock in the letters by using the SETUP button.
When the letter is locked in, the cursor moves to the next space.
- Please repeat the above to input the ID.
→→→→
SETUP
. LENS DC↙
2. EXPOSURE ↙
3. WHITE BAL ATW-L
4. DAY NIGHT EXT
5. 3DNR ON↙
▶▶▶▶6. SPECIAL ↙↙↙↙
7. ADJUST ↙
8. RESET ↙
9. EXIT
↙
SPECIAL
▶1. CAM TITLE OFF
2. D-EFFECT ↙
3. RS485 ↙
4. MOTION OFF
5. PRIVACY OFF
6. SYNC INT
7. LANGUAGE ENGLISH
8. RETURN RET ↙

11
Note If the wrong name has been input.....
• If you press the SETUP button after moving the cursor to CLR, all the letters will be
erased. If you want to correct a letter, please move the cursor to the arrow at the bottom
left of the screen and press 'SET'.
• Please position the cursor above the letter you wish to correct, and then move the
cursor on to the letter you wish to choose and press the SETUP button.
- When a name has been chosen, please
select a position for the name display.
Please move the cursor onto 'POS' and
then press the SETUP button.
The name will appear at the top left corner. Please find the position you wish to display
the name by using the directional buttons,
and then press the SETUP button.
- Please select 'END' and then press the
SETUP button to complete ID input.
2. D-EFFECT
▶ FREEZE : You can view still or moving pictures.
▶ MIRROR : You can flip the picture
- MIRROR : Horizontal reverse for pictures on the monitor.
- V-FLIP : Vertical reverse for pictures on the monitor.
- ROTATE: diagonal reverse pictures on the monitor (180° rotation)
▶ D-ZOOM : You can use a digital zoom.
- D-ZOOM : X1.0 <-> X32.0
D
-
EFFECT
FREEZE OFF
MIRROR OFF
D-ZOOM OFF
GAMMA 0.45
NEG.IMAGE OFF
RETURN RET ↙
SPECIAL
. CAM TITLE OFF
▶▶▶▶2. D-EFFECT ↙↙↙↙
3. RS485 ↙
4. MOTION OFF
5. PRIVACY OFF
6. SYNC INT
7. LANGUAGE ENGLISH
8. RETURN RET ↙
→→→→

12
- PAN : Moving zoom-in picture to left-right
- TILT : Moving zoom-in picture to up-down
* It doesn’t work for PAN/TILT when the D-ZOOM is on x1.0.
▶ GAMMA : Setting GAMMA curve.
▶ NEG. IMAGE : Switching to negative color.
4. MOTION
Motion detection function allows more effective observation. When any movement is
detected, signal is generated.
▶▶▶▶ ON: If ‘MOTION’ function is active, character of person is flickering on right above
position when motion is detected on selected area.
☞ MOTION DETECTION Setting
• AREA SELECT : Select the programmed area.
• AREA DISPLAY : Turn on and off the programmed motion area.
• LEFT / RIGHT : Move left-right (horizontal) position of the programmed motion area.
• WIDTH : Adjust horizontal width of the programmed motion area
• TOP / BOTTOM : Move vertical position of the programmed motion area
• HEIGHT : Adjust vertical height of the programmed motion area
• SENSITIVITY : Adjust motion sensitivity of the programmed motion area.
• MOTION VIEW : Turn on and off the display when motion sensitivity detected.
• RETURN : Save setup value and return to previous menu.
▶▶▶▶ OFF : Cancel Motion detection function.
5. PRIVACY
You may conceal specific area on the screen with
this ‘PRIVACY’ function. Select ‘ON’ by pressing
left/right button and press ‘SET’ button to enter
‘PRIVACY’ mode.
- Select ‘ON’ and press ‘SET’ button for PRIVACY
setup menu.
SPECIAL
. CAM TITLE OFF
2. D-EFFECT ↙
3. RS485 ↙
▶▶▶▶4. MOTION OFF
5. PRIVACY OFF
6. SYNC INT
7. LANGUAGE ENGLISH
8. RETURN
RET
↙
SPECIAL
. CAM TITLE OFF
2. D-EFFECT ↙
3. RS485 ↙
4. MOTION OFF
▶▶▶▶5. PRIVAC OFF
6. SYNC INT
7. LANGUAGE ENGLISH
8. RETURN
RET
↙

13
☞☞☞☞ PRIVACY Area Setting
• AREA SELECT : Select the programmed privacy
area (No.1~8)
• AREA DISPLAY : Turn on and off the programmed
privacy masking.
• LEFT/RIGHT : Move left-right (horizontal) position
of the programmed privacy area.
• WIDTH : Adjust horizontal width of the
programmed privacy area.
• TOP/BOTTOM : Move up-down (vertical) position of the programmed privacy area.
• HEIGHT : Adjust vertical height of the programmed privacy area.
• COLOR : Setup color of the programmed motion area mask.
6. SYNC
In areas where the supply is at 60Hz/NTSC (50Hz/P
AL), you can synchronize the output phase of
multiple cameras using the power synchronization
function (Line-Lock) without using a synchronization
signal generator.
▶ INT : Internal Synchronization Type
▶ L/L : Power Synchronization Type, Line-lock
• Press the SET button.
• You can select a desired phase between 0 and 359.
NOTE
• When using AC power at 60Hz / NTSC (50Hz/PAL)
frequency, you can use the L/L type synchronization.
• When the power is DC 12V, the SYNC. The menu is fixed to the ‘INT’ mode.
7. LANGUAGE
It can be switched to multi-language for OSD menu.
SYNC
▶▶▶▶DPHASE
0 ~ 359
RETURN RET↙
SPECIAL
. CAM TITLE OFF
2. D-EFFECT ↙
3. RS485 ↙
4. MOTION OFF
5. PRIVACY OFF
▶6. S NC INT
7. LANGUAGE ENGLISH
8. RETURN
RET
↙
SPECIAL
. CAM TITLE OFF
2. D-EFFECT ↙
3. RS485 ↙
4. MOTION OFF
5. PRIVACY OFF
6. SYNC INT
7. LANGUAGE ENGLISH
8. RETURN RET ↙↙↙↙

14
8. RETURN
Select this to save the SPECIAL menu settings and return to the SPECIAL menu
7) ADJUST
1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up and
Down buttons so that the arrow indicates IMAGE ADJ.
2. Select a desired mode using the Up and Down buttons.
▶▶▶▶ SHARPNESS : Adjust brightness of the video picture
▶▶▶▶ BLUE : Adjust CB GAIN of the color
▶▶▶▶ RED : Adjust CR GAIN of the color
8) RESET
Reset the camera settings to the factory defaults
9) EXIT
Press the SET button in the EXIT menu to save the current settings and exit the SET menu.
SETUP
. LENS DC↙
2. EXPOSURE ↙
3. WHITE BAL ATW-L
4. DAY NIGHT EXT
5. 3DNR ON↙
6. SPECIAL ↙
▶▶▶▶7. ADJUST ↙↙↙↙
8. RESET ↙
9. EXIT
↙
SETUP
. LENS DC↙
2. EXPOSURE ↙
3. WHITE BAL ATW-L
4. DAY NIGHT EXT
5. 3DNR ON↙
6. SPECIAL ↙
7. ADJUST ↙
8. RESET ↙↙↙↙
9.
EXIT
↙↙↙↙

15
5. Dimensions

16
GENERAL
Signal system NTSC PAL
Image Sensor 1/3” Sony HAD CCD
Total Pixels 811(H) Χ 508(V) 795(H) Χ 596(V)
Effective Pixels 768(H) Χ 9 (V) 752(H) Χ 582(V)
Resolution 580 TV lines
Scanning Frequency 15.73 KHz(H), 60(V) 15.625KHz(H), 50(V)
Shutter Speed 1/60 ~ 1/100,000 sec 1/50 ~ 1/100,000 sec
IR LED ON 0 Lux Min.
Illumination IR LED OFF 0.0001Lux (Sens-up 256x)
IR LED Range At Indoor 30M (LED :30 PCS)
Day & Night EXT / B/W /Color
Digital WDR On / Off
Digital Zoom X32
White Balance
ATW / AWB / AWC-Set / Manual / Indoor / Outdoor / ATW-L
BackLight OFF / BLC / HSBLC
Wide Dynamic Range 52dB
AGC Low / Middle / High / Off
3D-DNR On / Off
Privacy Zone / Motion Detection
8 Area / Zone
Sharpness 0 ~ 31
S/N Ratio More than 52dB
Video Output Composite video output 75 ohm terminated
Lens 2.8~12.0mm Auto Iris Lens ( True Day & Night with ICR ), F1.2
Sync. System Internal
Operating Humidity 30 % ~ 90 % RH
Operating Temp. - 10°C to 50°
Install Type
Outdoor (IP66)
Dimension φ100(Bubble) x 107.5(H)mm
Material PC Bubble, Aluminum Body
Weight 1.1Kg
Power Consumption Max 2.5W
Power Supply DC 12 V (10.2V~1 .5 V) Dual Voltage (Option) : AC2 V / DC12V
6. Specifications