kinetic VDM-IR36VF-600 User manual

VDM-IR36VF-600 Series
Anti – Vandal Colour Dome
Day & Nig t IR Color
‘Anti Vandal’ Dome Camera
Tri-axis mountable
Specification
Model VDM-IR36VF-600 Pick Up Element SONY HQ1 1/3″ CCD Effective Picture
Elements ( H*V ) NTSC:768×494, PAL:7 2× 82
Horizontal Resolution 600 TV Lines S/N Ratio Clock Frequency (MHZ) NTSC:19.0699 , PAL:19.312
Scanning System 2:1 interlace Minimum Illumination 0 Lux (with IR LED ON)
Sync ronous System Internal, Negative sync. Auto Electronic S utter NTSC:1/60s~1/100,000s,PAL:1/ 0s~1/100,000s Gama C aracteristic 0.4
Video Output 1Vpp,7 Ω
Auto Gain Control Auto Power////Current 12VDC(+/-10%)/ 00mA
Lens 4--9mm varifocal
Dimension (mm) ￠131×93(H)
Weig t (g) 8 0
Storage Temperature -30~ +60℃
Operating Temperature -10~ +4 ℃
More than 48dB
IR Project Distance 30 Meters ( with 36 Unit Infrared LED)
IR Status Under 10 LUX by CDS
IR Power On CDS Auto Control
Packing List
No Name Model Number 2. User Guide VDM-IR36VF
Series 1 1. Aluminum Dome Day & Night IR Color
Camera
VDM-IR36VF-600 1
Distributor：
Notes: : : : Before providing power to t e
camera, please read t is User Guide in
detail!
Do not attempt to disassemble the camera.
If the camera does not work, please contact
your local Distributor or Kinetic CCTV
directly

INTRODUCTION
Congratulations on your purchase of this product. Our
range of Anti-vandal IR ‘Night vision’ Dome cameras adopt
the latest SONY CCD image sensors and drivers.
All are water-resistant, tri-axis mountable and suitable for
day & night, indoor & outdoor applications. They offer high definition combined with image stability, strong anti-
jamming, with rich and real colours. Installation & operation
are very straight forward.
Please read this instruction manual carefully to ensure
proper use of the product
CONNECTING
PRODUCT FEATURES:
* * * * Sensor ((((CCD)))) SONY 1/3" HQ1 CCD Sensor.
* * * * Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit. The color camera
achieves high definition images under low LUX
* * * * Auto Electronic S utter (AES)
Built-in auto electronic shutter function. The colour
camera’s AES speed can reach 1/100,000s.
* * * * Gamma C aracteristic
Camera Gamma characteristic is 0.45.
* * * * Scanning Mode
NTSC or PAL mode. * * * * Nig t-time Vision 0 LUX with IR LEDs ON. Adopts Taiwanese high quality
IR LED’s, having excellent night-vision performance.
DC12V Power Supply
Monitor VDM-IR36VF
TROUBLE SHOOTING
Link wire rule：
Power Video
1. No Picture after power-up
. May be due to power supply voltage abnormality, please check the power
supply voltage and polarity. . Please check all the connecting cables and monitors to ensure they are
connected correctly.
2. T e camera image as flowing interference ripples
. May be caused by the power supply AC ripples, or video signal ground loop
interference. . Check the monitor and peripheral equipment used.
3. T e image background colour c anges continuously
. Fluorescent lamp’s electromagnetic field may cause colour roll. This is a
recognized phenomenon with CCD cameras.
. Reduce the number of fluorescent lamps or increasing the distance between
the camera and the fluorescent lamps may improve things.
4. Picture smear is apparent
. The power supply’s voltage unstable. . Cables not connected correctly or have high impedance.
Notes：：：： ●An appropriate regulated Low voltage PSU must be used. Its output
voltage、current、voltage polarity and operating temperature must
match the camera’s requirement. ●To avoid damage during lightning you must use an Anti-surge device or
turn off the power and disconnect the cable. Video 12V DC
To prevent fire or shock hazard. Do not expose the unit
The symbol is intended to alert the user to the presence of
The symbol is intended to alert the user to the presence of
to water for long durations.
important operating and maintenance (servicing)
Instructions in the literature accompanying the appliance.
uninsulated ‘dangerous voltage’ within the product’s
enclosure that may be of sufficient Magnitude to constitute
a risk of electric shock to persons.
CAUTION:
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK
DO NOT REMOVE COVER, BANG OR KNOCK USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO OUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC. DO NOT OPEN
CAUTION:
To prevent electric s ocks and risk of fire azard,
do NOT use ot er t an specified power source.
Note: : : : ● Please note the camera’s operating temperature and its using
environment. Avoid using the camera at too high or too low
temperatures. The recommended operating temperature is - c
to +40c.) ●Never make the camera face the sun or bright object. Otherwise,
it will damage the CCD.
● Do not mount the camera near by the radiator or heater.