Kinfine HOMEPOP K6859 User manual

>>assembly instructions
Style Number : K6859

2
Congratulations on your latest HomePop purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck --though we’re confident you won’t need it.
1. Check for damaged or missing parts. Customers can email service@kinfine.com or call 1-888-626-0888 to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
before you begin

..............................................
table of contents
introduction
hardware
parts list
assembly
2
4
5
6-7
QUESTIONS? Just email service@kinfine.com or call 1-888-626-0888 parts and service. For fast service, have the style number and article number ready when calling. 3

4
............................................................................
hardware
(A) x 8
5/16" x 45mm
round hex screw
(C) x 8
Φ 22mm flat washer
(B) x 8
Φ 8mm lock washer
(D) x 1
5mm Ball end
Hex wrench

............................................................................
5
ITEM DESCRIPTION QUANTITY
1
2
3
4
chair cushion
front leg
left back leg
right back leg
1
2
1
1
1
3
4
2
2

............................................................................
step 1.
1
6
Please do not assemble with power tools
2
(A) x 8
5/16" x 45mm
round hex screw
(C) x 8
Φ 22mm flat washer
(B) x 8
Φ 8mm lock washer
(D) x 1
5mm Ball end
Hex wrench
DABC
1
4
3
2
2

............................................................................
step 2.
7
Level the furniture, use leveling feet if needed.
A friendly reminder from us:
Please keep the Allen wrench.
After a period of time, there may be a chance the
KD furniture may become loose, please use an
Allen wrench to tighten the loose bolts.
Put the chair right and check whether the chair has been well assembled.
If it is not assembled, loosen the screw and tighten it on the ground.
Adjustable leveling feet
( This part is already attached on the end cap of 4 legs. )