Kinfine HOMEPOP K4286 User manual

>>assembly instructions
Style Number : K4286

2
Congratulations on your latest HomePop purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck --though we’re confident you won’t need it.
1. Check for damaged or missing parts. Customers can email service@kinfine.com or call 1-888-626-0888 to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
before you begin
tools needed

..............................................
table of contents
introduction
hardware
parts list
assembly
2
4
5
6 - 9
QUESTIONS? Just email service@kinfine.com or call 1-888-626-0888 parts and service. For fast service, have the style number and article number ready when calling. 3

4
............................................................................
hardware
(C) x 8
Φ 20mm flat washer
(B) x 8
Φ 6mm lock washer
(A) x 8
1/4" x 40mm
round hex screw
(E) x 1
4mm Ball end
Hex wrench
............................................................................
(D) x 4
Screw Flat head 50mm

............................................................................
5
ITEM DESCRIPTION QUANTITY
1
2
3
seat cushion
leg
bar
1
2
2
2
2
3
1
3

............................................................................
step 1.
6
1
2
2
3
3

............................................................................
step 2.
7
Please do not assemble with power tools
1 2
Open the velcro.
Now you may tighten all 8 bolts.
(C) x 8
Φ 20mm flat washer
(B) x 8
Φ 6mm lock washer
(A) x 8
1/4" x 40mm
round hex screw
(E) x 1
4mm Ball end
Hex wrench
1
ABC
E

............................................................................
step 3.
8
Close the velcro.
1Using philip screw driver to tighten the screws.
(D) x 4
Screw Flat head 50mm
D

............................................................................
step 4.
9
A friendly reminder from us:
Please keep the Allen wrench.
After a period of time, there may be a chance the
KD furniture may become loose, please use an
Allen wrench to tighten the loose bolts.
Level the furniture, use leveling feet if needed.
Adjustable leveling feet
( This part is already attached on the end cap of 4 legs. )