King Slide 1A68F User manual

1.34
Undermount Slides
King Slide reserves the right to alter specications of all the products without notice. If the entity is different from the illustration, please refer to the entity.
• Undermount with full extension travel length
• Ultra smooth gliding motion with high rigidity and stability
design
• Enhanced silent soft-closing feature with light opening force.
• Durable damping system with fast response capability
• Tool-less height adjustment from the drawer front with 3.5 mm
range
• Effortless assembly and removal of drawer with front release
lever
• High dynamic loading capacity of 34kg (75lb) with 100,000
life cycles, or 45kg (100lb) with 50,000 life cycles
• High installation allowances for drawer width: +0/-2 mm, and
for drawer depth: +1/-1 mm
1A68F
• Length: 229mm to 533mm
• Travel: Full Extension
• Maximum Drawer Side Thickness: 16mm
• Max. Load Capacity: 45 kg(100 lb)/pair
• Mount: Undermount
• Material: Galvanized Steel
• Packing: Unit Packed in 2 pairs/carton
6 pairs/carton
SIMPLEX—
Silent Soft-Closing Undermount Slide
for Face Frame Cabinet (16mm)
Specifications
• For Face Frame Cabinet : Kitchen Furniture, Kitchen Cabinetry,
Home Cabinetry and Box Drawers
Features
Applications

1.35
www.kingslide.com
King Slide reserves the right to alter specications of all the products without notice. If the entity is different from the illustration, please refer to the entity.
Undermount Slides
1
Dimension Specifications
10
1A68F229
1A68F305
1A68F381
1A68F457
1A68F533
37
69
133
165
229
261
357
453
517
Max14(9/16")
10
1A68F229
1A68F305
1A68F381
1A68F457
1A68F533
37
69
133
165
229
261
357
453
517
Max14(9/16")
Item No. Drawer Length
mm (inch)
Overall Cabinet Depth
mm (inch)
Cabinet Depth With Bracket
mm (inch) Profile Length
mm (inch)
System Screw Locations
mm (inch)
MAX MIN A B
1A68F229 229 (9") 305 (12") 299 (11-25/32") 266 (10-15/32") 256 (10-1/16") 133 (5-1/4") 229 (9")
1A68F305 305 (12") 381 (15") 369 (14-9/16") 326 (12-7/8") 317 (12-1/2") 165 (6-1/2") 261 (10-1/4")
1A68F381 381 (15") 457 (18") 446 (17-9/16") 403 (15-7/8") 394 (15-1/2") 165 (6-1/2") 357 (14-1/16")
1A68F457 457 (18") 533 (21") 522 (20-9/16") 479 (18-7/8") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16")
1A68F533 533 (21") 610 (24") 598 (23-9/16") 555 (21-7/8") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8")
Fit with American standard 3" cabinet depth system.
Drawer Width Formula
Drawer Side Thickness
mm (inch)
"W" minus
mm (inch)
16 (5/8") 10 (3/8")
15 (19/32") 12 (15/32")
14 (9/16") 14 (9/16")
13 (1/2") 16 (5/8")
12 (15/32") 18 (23/32")
W: Internal Cabinet Width
Example:
Internal Cabinet Width = 457 mm (18")
Drawer Side Thickness = 13 mm (1/2")
Drawer Width = 457 - 16 = 441 mm
= (18") - (5/8") = 17-3/8"
+0
-2
○X
Chipboard Screws System Screws
Cabinet Holes Position
Note: Holes other than those shown may be in the slide member at King Slide's option and may change without notice.
-2.0
+0
Overlay
installation
Inset
installation
Tool-less Height Adjustment :
Simply rotate the wheel at the front bottom of the
drawer to adjust the drawer height
Drawer Removal:
Simply press the front release device
to remove the drawer
Easy Assembly with Front-End Installation
• Red Dots : Minimum Screw Required
Note: Ensure the slide is parallel to the horizon or tilt to cabinet front
on both sides during installation.
Space Requirement

1.38
Undermount Slides
King Slide reserves the right to alter specications of all the products without notice. If the entity is different from the illustration, please refer to the entity.
Locking Device Locking Device and
Extension Plastic
B
B
A
A
a
a
Base plane
Base plane
Base plane
Drawer with
front panel
Rear
Front
2.5mm
drill bit
6.0mm
drill bit
Base plane
Base plane
Base plane
Base plane
a
A
a
A
Holes for rear hook
B: 6mm (depth 10mm)
Holes for Locking Device
A: 2.5mm
a: 2.5mm
Drawer without front panel
A
Front
Base plane
rear
Base plane
2.5mm
drill bit
Installation Instruction
1.Before installing the slides, make sure the dimensions of the cabinet and drawer meet the requirements specified in Space Requirement' drawing
respectively for the slide to be installed.
2.Drill holes on the cabinet following the 'Dimension Specifications' drawing on the reverse page. Mount the slides and the rear vrackets on the
cabinet using the recommended type of screws.
3.Make cut-outs on the drawer according to Fig. 1A's dimension (Using the drill template FL00ZD0-A as page 1.39 is recommended), then install the
front release lever according to Figs. 1B and 1C.
4.Pull out the slides on the cabinet.
5.Position and align the drawer with the slide as shown in Figs. 2A and 2B. Push the drawer all the way into the cabinet as shown in Fig. 2C until
clicked to complete the installation.
1A68F & 1B68F
Fig. 2A
Fig. 2B
Fig. 2C
Locking Device Locking Device and
Extension Plastic
B
B
A
A
a
a
Base plane
Base plane
Base plane
Drawer with
front panel
Rear
Front
2.5mm
drill bit
6.0mm
drill bit
Base plane
Base plane
Base plane
Base plane
a
A
a
A
Holes for rear hook
B: 6mm (depth 10mm)
Holes for Locking Device
A: 2.5mm
a: 2.5mm
Drawer without front panel
A
Front
Base plane
rear
Base plane
2.5mm
drill bit
Fig. 1A
Fig. 1B Fig. 1C
Locking Device Locking Device and
Extension Plastic
B
B
A
A
a
a
Base plane
Base plane
Base plane
Drawer with
front panel
Rear
Front
2.5mm
drill bit
6.0mm
drill bit
Base plane
Base plane
Base plane
Base plane
a
A
a
A
Holes for rear hook
B: 6mm (depth 10mm)
Holes for Locking Device
A: 2.5mm
a: 2.5mm
Drawer without front panel
A
Front
Base plane
rear
Base plane
2.5mm
drill bit
Locking Device Locking Device and
Extension Plastic
B
B
A
A
a
a
Base plane
Base plane
Base plane
Drawer with
front panel
Rear
Front
2.5mm
drill bit
6.0mm
drill bit
Base plane
Base plane
Base plane
Base plane
a
A
a
A
Holes for rear hook
B: 6mm (depth 10mm)
Holes for Locking Device
A: 2.5mm
a: 2.5mm
Drawer without front panel
A
Front
Base plane
rear
Base plane
2.5mm
drill bit
Locking Device Locking Device and
Extension Plastic
B
B
A
A
a
a
Base plane
Base plane
Base plane
Drawer with
front panel
Rear
Front
2.5mm
drill bit
6.0mm
drill bit
Base plane
Base plane
Base plane
Base plane
a
A
a
A
Holes for rear hook
B: 6mm (depth 10mm)
Holes for Locking Device
A: 2.5mm
a: 2.5mm
Drawer without front panel
A
Front
Base plane
rear
Base plane
2.5mm
drill bit
Installation Requirement
Rear Bracket

1.39
www.kingslide.com
King Slide reserves the right to alter specications of all the products without notice. If the entity is different from the illustration, please refer to the entity.
Undermount Slides
1
Locking Device Locking Device and
Extension Plastic
B
B
A
A
a
a
Base plane
Base plane
Base plane
Drawer with
front panel
Rear
Front
2.5mm
drill bit
6.0mm
drill bit
Base plane
Base plane
Base plane
Base plane
a
A
a
A
Holes for rear hook
B: 6mm (depth 10mm)
Holes for Locking Device
A: 2.5mm
a: 2.5mm
Drawer without front panel
A
Front
Base plane
rear
Base plane
2.5mm
drill bit
Our specially designed front end installation allows quick and simple
drawer installation and removal processes. The quick connect and
disconnect device is located at the front end under the drawer, keeping
intact the elegant appearance of the drawer.
Tool-less Height Adjustment :
Simply rotate the wheel at the front bottom of the
drawer to adjust the drawer height
Drawer Removal:
Simply press the front release device to
remove the drawer
19
49
+0
-2.0
+0
-2.0
Easy Assembly with Front-End Installation
Drill Template