Kingfisher gardening GCART3 User manual

User Manual
Heavy Duty Garden Cart
CODE: GCART3
Bonnington Plastics Limited - NG8 4GP

Contents
4
5
5
6
Pack Contents/Parts..................................................................................
General Information...................................................................................
Safety...................................................................................................
Assembly........................................................................................
Thank you for purchasing this product, please keep this manual for future reference.
Before proceeding please ensure that you have read thoroughly before proceeding
and ensure that all the parts and ttings are accounted for and are present.

Garden Cart
4
Pack Contents/Parts
Pack contents/parts
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
A.
B.
C.
D.
E.
F.
G.
1 x Base
1 x Front Axle
1 x Rear Axle
1 x Rear Axle Brace
1 x Longer Side Panel
1 x Longer Side Panel
1 x Rear Side Panel
1 x Front Side Panel
4 x Wheels
1 x Handle with Cushion Grip
10 x Small Bolts
15 x Small Nuts
12 x Small Washers
1 x Large Bolt
4 x Small Split Pins
4 x Side Lock Pins
8 x Large Split Pins
1
2
3
4
5
6
7
8
C
B
A
G
D
E
F
9
10

Garden Cart
5
General Information/Safety
IMPORTANT, PLEASE RETAIN FOR FUTURE REFERENCE: READ
CAREFULLY!
Read and follow the instructions and safety information before using
this product for the rst time.
Any errors made in following the instructions may result in serious injury. Keep all
instructions in a safe place for future use. When using equipment, a few safety
precautions must be observed to avoid injuries and damage. Please read the
complete instructions with due care. Keep this manual in a safe place, so that the
information is available at all times. If the equipment is passed onto, or used by any
other persons ensure they are passed these instructions also. The manufacturer
cannot be held liable for damage caused by improper or incorrect usage.
Familiarise yourself with assembly process of the cart before proceeding with
construction. Ensure that all the parts are undamaged and have been assembled
correctly.
Safety
This product is intended for domestic, outdoor use.
Do not jump on or use excessive force with this product.
Regularly check the product to make sure that it is intact condition.
Assembly in incorrect order could damage the system. It is advised that
you only use this product in correct manner. The manufacturer assumes
no liability of any kind for misuse and subsequent damage.
This is not a toy. DO NOT allow children to play with this cart at any time.
-
-
-
-
-

Garden Cart
6
Assembly
Place the rear axle braces (4) into place over
the axle and attach to the base (1) using 4 x
small bolts (A), 4 x small washers (C) and 4 x
small nuts (C) as shown above.
Place the wheels (9) onto each axle as shown
above. Secure in place using 1 x small split
pins (E) for each wheel.
Place the base (1) on a flat surface clear of
debris.
Attach the front axle (2) to the base (1) using 4
x small bolts (A), 4 x small washers (C) and 4 x
small nuts (C) as shown above.
Turn the unit over as shown above.
Attach the rear axle (3) to the base (1) using 2
x small bolts (A), 2 x small washers (C) and 2 x
small nuts (B) as shown above.
3
5
1
4
6
2
1

Garden Cart
7
Assembly
Attached the 4 x side lock pins (F) as shown to
the front (8) and rear (7) panels using 1 x (B)
and 1 x (C) for each.
Attach the longer side panel (5) using 2 x split
pins (G) as shown above.
Place the 1 x handle (10) to the front axle (2)
as shown above using 1 x (D), 1 x (C) and 1 x
(B).
Your garden cart is now complete, please
enjoy using the cart for your general
gardening tasks.
Attach the remaining side (6), rear side panel
(7) and the front side panel (8) as shown
above using 2x (G) for each.
9
11
7
10
8

Bonnington Plastics Limited - NG8 4GP
bonnington plastics.com
m