Kings Adventure AKEP-TRAILCAM02 User manual

USER MANUAL
SKU: AKEP-TRAILCAM02
PREMIUM TRAIL CAMERA

2DRAFT V1.1
CONTENTS
PLEASE READ AND UNDERSTAND THIS MANUAL
COMPLETELY BEFORE USING THIS PRODUCT.
1. GENERAL INFORMATION 3
1.1 Introduction 3
1.2 Main Features 3
1.3 Application 3
1.4 Illustration 4
2. QUICK START 4
2.1 Batteries 4
2.2 Insert TF Card 5
2.3 Enter “SET” Mode 5
2.4 Enter Live Mode 5
3. ADVANCED SETTINGS 6
3.1 Parameter Settings 6
3.2 File Format 7
4. APPENDIX I 8
4.1 Technical Specification 8
5. WARRANTY 9

3DRAFT V1.1
1. GENERAL INFORMATION
The Trail Camera (also called Scouting/hunting camera) is as counting device. It can be triggered by sudden
change of ambient temperature caused by any movement of human (or animals) in ascertain region of
interested (ROI), which is detected by a high sensitive Passive Infra-Red (PIR) sensor,and then captures high
quality pictures or records HD video clips automatically. The camera can achieve more applications through
Timer, interval and other function settings.
• For hunting, trail animals trace or habit.
• For wildlife observing and researching, captures pictures and videos of wild animals.
• As sports camera, for riding, driving, camping or exploring.
• As Motion-Triggered security camera, for home, office and community.
• All other indoor and outdoor surveillance where invasion evidence needed.
1. 90 degree camera lens.
2. Optional 1/3/5/8/12/16/20 Mega-pixel high-quality resolution.
3. The trigger time reach up to 0.6 second.
4. Build-in 2.0”TFT color screen to review photos and videos.
5. Support TF Card up to 128GB.
6. Waterproof IP65.
7. Perform in the most extreme temperatures from -22°F to 158°F.
8. 38pcs lR LEDs.
9. Date, time, temperature and moon phase can be stamped in the picture.
10. ln “Camera + video” Mode, camera takes both pictures and video at every trigger event.
11. In Time lapse setting, the camera automatically and constantly takes pictures/videos at specified interval.
It’s very useful when observing plants flowering, birds building nest, or when monitoring unattended
properties such as parking lots/yards. This feature can be used together with Timer feature to meet your
timetable.
12. Extremely long standby battery life (in standby mode, up to 6 months with 8xAA batteries).
13. Serial Number function enables you to code locations in the photos. This helps multi-camera users
identify the location when reviewing the photos.
14. Lockable and password protected.
15. Color pictures at daytime, monochrome pictures at night, switched automatically.
1.1 INTRODUCTION
1.3 APPLICATION
1.2 MAIN FEATURES

4DRAFT V1.1
• Figure 1-1 shows the front view of the camera.
• Figure 1-2 shows the bottom and the side view of the camera.
• Figure 1-3 shows the back view of the camera.
• Figure 1-4 shows the inside view of the camera.
To supply power, it is recommended to use 4xAA or 8xAAhigh-performance alkaline batteries( not included).
Make sure the polarity matches the sign on the cover.
lf you are not using the camera for an extended period of time, please remove batteries from the camera to
avoid possible acid leak that may damage the camera.
Alternatively the camera can run on external (6V/2A) DC power supply.
On “SET” mode when battery power level gets low, the message “Low Battery” will show on TFT screen.
1.4 ILLUSTRATION
2. QUICK START
2.1 BATTERIES

5DRAFT V1.1
The camera does not come with internal memory. So it will not work without a TF memory card. Before
inserting the TF card into the card slot, The supported memory capacity is up to 128GB. If you use a card
capable of above 128GB, make sure it has been test before putting the camera in use.
2.2 INSERT TF CARD
Switch to the “SET” position to enter the Set mode. In this mode you
can take pictures or video clips like a regular digital camera.Or enter
the Menu to set up parameters. On the keypad there are six “shortcut”
functional keys working as shown to the right.
• Press the “UP” key to set the camera to shoot video clips.
• Press the “Down” key to set the camera to take pictures.
• Press the “Enter” key to manually trigger the shutter. A photo or
video (depending on the camera setting) will be taken and saved
to the TF card.
• Press the “Right” key to review/playback photos/video on the
LCD screen. Use “UP” and “Down” key to navigate.
• Press the “MENU” key to set up photos and video when review
photos/ videos. You can Delete one/ Delete All/Slide Show/
Protect the photos and videos you want.
2.3 ENTER “SET” MODE
Switch to the ON position to enter the live mode. The Motion Indicator will flash for about 15 seconds and the
camera starts working by itself without any manual handling. lt will at once shoot pictures or record videos
when game or other objects enter the PlR area of the senor. If the game roams away after entering the PlR
area of the sensor, the camera will power off and enter standby mode.
NOTE: ln general, you are recommended to place the camera 3 to 6 feet (1 to 2 meters) above the
ground.
To avoid potential false triggers due to temperature and motion disturbances, please do not aim the
camera at a heat source (i.e the sun) or nearby tree branches and limbs. The ideal direction to aim
at is North or South. Also, remove any limbs close to the front of the camera.
2.4 ENTER LIVE MODE

6DRAFT V1.1
3. ADVANCED SETTINGS
The trail camera comes with preset manufacturer settings. You can change the settings to meet your
requirements. Please make sure that the camera is in the SET mode.
Press “MENU” key to enter/exit the menu. Press “UP/DOWN” key to move the marker, press “Enter” key to
confirm the change. Always remember to press “Enter” to save the change. Otherwise you will lose your new
setting.
3.1 PARAMETER SETTINGS
Parameter Settings Description
Mode Camera Video
Cam + Video
Select whether still photos or video clips are taken. In Cam + Video mode,
can first take photos and then shoot videos afterward.
Language Enter Multi language
Photo Size
20M
16M
12M
…..
Select desired resolution for still photos from 1 to 20 mega pixels. Higher
resolution produces better quality photos, but creates larger files that take
more of the TF card capacity. Besides, larger files require longer time to write
to the TF card, which will slightly slow the shutter speed.
Video Size
4K
2K
1080P
Select video resolution(pixels per frame ). Higher resolution produces better
quality videos, but creates larger files that take more of the TF card capacity.
Photo No.
01 photo
02 photo
03 photo
Select the number of photos taken in sequence per trigger in Camera mode.
Please also refer to the interval parameter.
Video Length
AVI
Optional from 3s
to 5min
Videos are in AVI format that can be played back on most video players.
Interval
1Min
Optional from 5s
to 60min
Select the shortest length of time that the camera will wait until it responds to
any subsequent triggers from the PlR sensor after a game is first detected.
During the selected interval, the camera will not take pictures/videos. this
prevents the TF card from filling up with too many redundant images.
Sense Level
Normal
High
Low
Select the sensitivity of the PlR sensor. The High setting suits Select the
sensitivity of the PlR sensor. The High setting suits indoors and environments
with little interference, while the Normal/Low suits outdoors and environments
with more interference. Temperature also affects the sensitivity. The High
setting is suitable when the ambient temperature is warm, and the Low setting
is helpful in cold weather.
Set Date/Time Enter Press Enter to set up date and time
Timer On
Off
Select On if you only want the camera to work within a specified time period
every day. For instance, if the starting time is set at 18:35and the ending time
at 8:25, the camera will function from 18:35 the current day to 8:25 the next
day. Outside the time period the camera will not be triggered or take photos/
videos.
Time Lapse On
Off
lf set On, the camera will automatically take photos/videos according to the
set interval, regardless of whether the PIR sensor has detected any game.
This is helpful when observing cold-blooded animals like snakes, or the
process of flowering, etc

7DRAFT V1.1
Password set On
Off
lf set On, the camera will automatically take photos/videos according to the
set interval, regardless of whether the PIR sensor has detected any game.
This is helpful when observing cold-blooded animals like snakes, or the
process of flowering, etc
Password set On
Off Set up a password to protect your camera from unauthorized users.
Serial No. On
Off
Select On to assign a serial number to each camera you have. You can use
the combination of 4 digits to record the location in the photos (e.g.1234 for
Yellow Stone Park). This helps multi-camera users identify the location when
reviewing the photos.
Audio On
Off
The default setting is On, when it is on, the camera can record voice,
otherwise, the video will be silent.
TF card storage Stop saving when
full cycle storage
Select the loop mode to overwrite the previous file to continue working when
the TF card is full.
Format Yes
No
All files will be deleted after formatting the TF card , Highly recommend you
format the TF card if it has been used previously in other devices. Caution:
make sure wanted files on the TF card have been backed up first!
Default
Setting Yes
No
Press Enter to return all your previous settings back to the manufacturer
defaults.
Version Enter Look through the version of the camera
The camera stores photos and videos in the folder, DCIM\100MEDIA in the TF card. Photos are saved with
filenames like DSCF0001.JPG and videos like DSCF0001.AVI. Ln the ON mode, you can use the provided
USB cable to download the files to a computer. Or you can put the TF card to a TF card reader, plug in a
computer, and browse the files on the computer without downloading.
The AVI video files can be played back on most popular media players, such as Windows Media Player, Quick
Time, etc.
3.2 FILE FORMAT

8DRAFT V1.1
4. APPENDIX I
4.1 TECHNICAL SPECIFICATION
Model Parameters
Image Sensor 4 Mega Pixels color CMOS
Max.Pixel Size 6144x3456
Lens F=1.8;FOV=90°; IR-Cut
LCD Screen 2.0 inch TFT color screen
Keypad 6 Keys, 1 Switch
Memory TF Card (8~128GB)
Picture Size 20MP; 16MP; 12MP; 8MP; 5MP; 3MP; 1MP
Video Size 3840x2160@10fps; 2688x1520@20fps; 1920x1080@30fps;
1280x720@30fps; 720x480@30fps; 640x480@30fps
PIR Sensitivity High/Normal/Low
PIR Sensing Angle 60°
Operation Mode Day/Night
Trigger Time 0.6 Second
Trigger Interval 5sec-60min
Shooting Numbers 1-3
Video Length 3sec - 5min
Camera+Video First take Picture then Video
Password 4-Digit Numbers
Device Serial No. 4-Digit Numbers
Time Lapse 1 Second-24 Hours
Power Supply 4x AA;Expandable to 8xAA
Power Consumption 250mA (+800mA when IR LED lights UP) at 6V DC
Low Battery Alarm 4.5V
Interface USB; TF Card Slot; 6V DC External
Waterproof IP65

9DRAFT V1.1
5. WARRANTY
WARRANTY PERIOD:
Full 12 month warranty from date of purchase against all manufacturing defects.
WHAT DOES THE WARRANTY COVER?
Under normal usage conditions, this warranty covers:
a. Any defect in design or manufacture which results in the product failing to perform substantially as described
in authorised advertising or literature.
b. We will either repair or replace the product at our discretion providing that the fault is found to have been
caused by a design or manufacturing defect and not misuse or tampering.
Our goods come with guarantees that cannot be excludedunder the Australian ConsumerLaw. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a majorfailure. The benetsprovided to you as the
consumer by this warranty are in addition to other rights and remedies available to you under the law.
THE WARRANTY DOES NOT COVER:
a. Any damage resulting from improper use
b.
c. The cost of removing and reinstalling the product
d. Travel and /or other expenses due to customer’s remote location
e. Transport charges and damage in transit. It is your responsibility to deliver and pick up your product,
including any costs associated with the postage of your repair or replacement product. If you do freight your
product we recommend that you insure against loss or damage.
f. Any loss directly or indirectly associated with the product failing to operate.
g. Damage caused by mould, insects, animals, misuse, incorrect operation, adverse weather, accidents
and fair wear and tear
TO MAKE A CLAIM, PLEASE ENSURE YOU RETAIN YOUR SALES RECEIPT OF PURCHASE
1800 88 39 64
12 MONTH LIMITED
WARRANTY
OUTDOOR SUPACENTRE PTY LTD
Level 1, Building A, 6 Figtree Drive,
Sydney Olympic Park, NSW 2127, Australia
PHONE: [phone]
www.4wdsupacentre.com.au
Faulty installation or modication made during installation