Kings Brand Furniture BK005 User manual

NOTE TO CUSTOMERS:
For ease and speed of assembly we recommend that before you commence each step of the
assembly that you identify all the parts required to complete that step.
We recommend that where possible you allow sufficient space to assemble the item as close
as possible to the place where it will be once assembled.
For the protection of your furniture we recommend that the product is placed on a dry, soft,
smooth and clean surfaces during assembly to prevent any damage. Avoid damp and direct
sunlight.
During assembly do not over tighten the screws or bolts, as this may damage the product.
Please ensure you retain all the product packaging until the item is completely assembled.
Periodically check all fitting and re-tighten as necessary.
Never allow any liquids to remain on your furniture as absorption can cause the wood to warp
or finish to de-laminate.
It is recommended that this item should be assembled by two adults.
REVOLVING BOOKCASE
PAGE 1 OF 3

Top Panel
Upper/Lower Partition
Screw m4 x 28mm
5 pcs
24 pcs
Quantity: 2
Upper Shelf Panel Middle Shelf Panel Lower (Revolving)Shelf Panel Base Panel
(come with a revolving mechanism)
TOOLS REQUIRED
MALLET
REVOLVING BOOKCASE
Middle Partition
P7 P8
Upper/Lower Divider Panel
(Left)
36 pcs
Sticker
PAGE 2 OF 3
11 1 1
P9
Upper/Lower Divider Panel
(Right)
22P10
Middle Divider Panel(Left)
1
P11
Middle Divider Panel(Right)
1P12
Stopper Panels
12
36 pcs
Wooden Dowel
M6 x 25
12 pcs
Connecting Bolt
H4
12 pcs
H5 H6
4 pcs
H7
H8
Leg Stud
P1
P2
P3
P4
P5
P6
P6
P7
P8
P8
P10
P12
P9
P9
P11
P12
5 pcs
Ø15/64”
STEP 1
Insert wooden dowels H3
P6 x2pcs
P7 P8 x2pcs
P9 x2pcs
P10
P11
P12
H3
STEP 2
Assemble the Upper shelves.
P1
H4
P2
P6
Allign connecting bolts H4 into P1
P9
P2
P8
H1
x12pcs
P12
x4pcs
P2
Upper shelve.Middle shelve.
Lower shelve.
1 7/64”
x12pcs
9.5mm

REVOLVING BOOKCASE
PAGE 3 OF 3
STEP 3 Completing assembly of the upper shelves.
P2
P1
P6
Align the Camlock H5 & turn
it to locked position when
it is connected to the bolts.
H4
STEP 4 Continue with the assembly of the Middle shelve.
P3
P7
P3
P11
P10
P12x4pcs
H1
x12pcs
STEP 5 Assemble the Lower shelve.
P6
P4
P9
P8
P12
x4pcs
H1
x12pcs
P6
STEP 6
P1
P2
Align the Connecting Bolts H4 into the
underside of P2 (Upper Shelve).
Upper shelve.
H4
STEP 7 Connect the Middle Shelve into the
Upper shelve.
Upper shelve.
Middle shelve.
P2
P3
P10
Align the Camlock H5
& turn it to locked
position when it is
connected to the bolts.
H5
H5
STEP 8
Align the Connecting Bolts H4
into the underside of P3.
P3
H4
STEP 9 Connect the Lower Shelve into the
Middle shelve.
Align the Camlock H5
& turn it to locked
position when it is
connected to the bolts.
H5
P3
Lower shelve.
P4
Upper Middle shelve.
STEP 10 Assemble the base panel P5 into the
underside of the Lower Shelve (P4)
Make sure to position the 2nd holes at the
revolving mechanism parallel with the
large holes (access holes) at P5 so that to allow the
mechanism to be mounted into P4 (Lower Shelve) by using screw H6 .
1st hole 2nd hole
3rd hole
access hole
at P5
P5
revolving
mechanism
H6
P5
P4
P4
P5
STEP 11 Assemble the Leg Studs H7 to the
base panel P5.
P5 H2
H7
H8
PUT THE ITEM UPRIGHT, AND IT IS READY TO USE.
CONGRATULATIONS!
Paste the stickers H8 to
cover those screws (24 pcs)
that can be seen when the
item stands upright.