KISANKRAFT KK-HTE-600 User manual

KisanKraft®
Warranty Certificate
(KISANKRAFT COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 20 of 20
Important: (1) Normal maintenance and adjustments to the product is the
responsibility of thecustomer. (2) Normal wear and tear is not covered under warranty.
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the
warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be
liable for general damages, including bodily injuries, or for incidental or consequential
damages including, but not limited to, loss of use, loss of profits, loss of production,
expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranty hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter the
obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended
to the first end user (original purchaser), and no warranty is made, nor authorized to
be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of
any obligation under this warranty for failure during the applicable warranty period,
deliver the defective product, to the nearest Authorized Dealer. KisanKraft Limited, its
manufacturers and its dealers reserve the right to inspect the claimed defective part(s)
to determine if the malfunction isthe result of a defect covered by this warranty. Please
note that the decision of KisanKraft Limited with respect to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGardenTools
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines
KisanKraft®
Warranty Certificate
(DEALER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 1 of 20
Product
Hedge Trimmer-
Electric
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-HTE-600
WARRANTY
PERIOD
6-MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign
Dealer’s Sign
What is covered: KisanKraft Limited and its manufacturers warrant this product to be
free from defects in material or workmanship. All parts defective in material and
workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its
manufacturers at the premises of Authorized Dealers, of such parts as appear to
KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to trade
accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor its authorized dealers assumes any
responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage,
(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper
set up, adjustments, tampering or altered products
Note: The purchase is not contingent upon a product demonstration. The purchaser
shall satisfy himself with the product, including any product demonstration or
verification of any function, before buying. KisanKraft Limited or its authorized
dealers, including online sellers, shall not be liable to give any on-site demonstration
after purchase of any of the product.

KisanKraft®
Warranty Certificate
(DEALER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 2 of 20
Important: (1) Normal maintenance and adjustments to the product is the responsibility
of the customer. (2) Normal wear and tear is not covered under warranty
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell, spark-
plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be
liable for general damages, including bodily injuries, or for incidental or consequential
damages including, but not limited to, loss of use, loss of profits, loss of production,
expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranties hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter the
obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended to
the first end user (original purchaser), and no warranty is made, nor authorized to be
made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of any
obligation under this warranty for failure during the applicable warranty period, deliver
the defective product, to the nearest Authorized Dealer. KisanKraft Limited, its
manufacturers and its dealers reserve the right to inspect the claimed defective part(s)
to determine if the malfunction is the result of a defect covered by this warranty. Please
note that the decision of KisanKraft Limited with respect to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGardenTools
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines
KisanKraft®
Warranty Certificate
(KISANKRAFT COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 19 of 20
Product
Hedge Trimmer-
Electric
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-HTE-600
WARRANTY
PERIOD
6-MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER
IS EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign
Dealer’s Sign
What is covered: KisanKraft Limited and its manufacturers warrant this product to be
free from defects in material or workmanship. All parts defective in material and
workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its
manufacturers at the premises of Authorized Dealers, of such parts as appear to
KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to trade
accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor its authorized dealers assumes any
responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of
machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical
damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7)
Improper set up, adjustments, tampering or altered products
Note: The purchase is not contingent upon a product demonstration. The
purchaser shall satisfy himself with the product, including any product
demonstration or verification of any function, before buying. KisanKraft Limited or
its authorized dealers, including online sellers, shall not be liable to give any on-
site demonstration after purchase of any of the product.

KisanKraft®
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 18 of 20
Wide Range of Products for Every Need
For more information give MISSED CALL: 07676065555
Many of our products have BIS: ISI certification.
KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 3 of 20
Operation Manual
KK-HTE-600
We recommend the use of a VOLTAGE STABILIZER for safety
and longer life of the product
KisanKraft Limited
(Formerly known as KisanKraft Machine Tools Pvt. Ltd)
Sri Huchhanna Tower, #4,1st Main,7-A Cross, Maruthi Layout, Dasarahalli,
HAF Post, Hebbal, Bangalore 560024,Karnataka, INDIA
♦Bangalore (HO) ♦ Ahmedabad ♦ Bhopal ♦ Bhubaneswar ♦ Coimbatore ♦
♦Jammu ♦ Guwahati ♦ Shimla ♦ Hubli ♦ Hyderabad ♦
♦Jaipur ♦ Karnal ♦ Kolkata ♦ Lucknow ♦ Pune ♦ Raipur ♦

KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 4 of 20
CONTENTS
BEFORE GETTING STARTED................................................................................... 7
OVERVIEW ........................................................................................................... 7
SAFETY INSTRUCTIONS......................................................................................... 7
ASSEMBLY............................................................................................................ 9
OPERATION.........................................................................................................10
1. Switching on and off ....................................................................................10
2. Blade Brake..................................................................................................10
3. Working position adjustment.......................................................................10
4. Trimming new growth..................................................................................11
5. Leveling hedges ...........................................................................................11
6. Side-trimming hedges ..................................................................................11
7. Shaping........................................................................................................11
8. Cutting sequence .........................................................................................11
9. Trimming the top .........................................................................................12
10. General information ..................................................................................12
MAINTENANCE ...................................................................................................12
TECHNICAL SPECIFICATIONS................................................................................13
PARTS DIAGRAM.................................................................................................14
PARTS LIST ..........................................................................................................15
KisanKraft®
PRODUCT RANGE
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 17 of 20
KisanKraft has a large range of products to serve the farmers. A list of our products
is given below:
Brush Cutters and Accessories
Brush Cutter/Power Weeder
Backpack Brush Cutter
Tea Pruner
Pole pruner with Engine
Reaper Attachment
Blades-Circular
Blades (2 &3 points)
Baffle
Nylon Rope
Tap & Go
Chainsaws
Petrol Chainsaw
Electric Chainsaw
Chain Sharpening Machine
Engines and Water Pumps
Engine –Diesel-(Horizontal)
Engine –Diesel(Vertical)
Engine-Kerosene
Water
Pump
with Petrol Engine
Water Pump with Kerosene Engine
Water Pump with Diesel Engine
Hand Tools
Secateurs
Folding Saw
Garden Rake
Garden Shovel
Hedge Shear
Lopper
Telescopic Hedge Shear
Telescopic Lopping Shear
Tree Pruner
Telescopic Steel Pipe & Fruit Picker Bag
Sheep Shear
Garden Tools
Electric Pressure Washer
Hedge Trimmer
Lawn Mower (Electric, Petrol & Manual)
Leaf Blower
Cultivators and Accessories
Petrol and Diesel
Sprayers and Accessories
BatterySprayer
Portable Power Sprayer
Trolley Sprayer
Manual Knapsack Sprayer
Manual Pressure Sprayer
Rose Cans
Hose Crimping Machine
HTP Sprayer
HTP Delivery Hose
HTP Hose Reel
HTP Stand
HTP Gun / Lance(Brass Rod
Knapsack Power Sprayer
Mister / Duster / GranuelSpreader
HTP Sprayer Set with Diesel Engine
HTP Sprayer Set with Kerosene Engine
Fogging Machine
Milking Machine
Wood Shredder
Fodder Ensiling Chaff Cutter
Fodder Grinder Chaff Cutter
Fodder Mini Chaff Cutter
Harvester
Maize Sheller
Maize Sheller + Dehusker
Maize Combine Harvester
Onion Digger Carlotti Italy
Tea Leaf Harvester
Sugarcane Combine Harvester
Sugarcane Leaf Stripper
Transplanter and Post Hole Digger
Paddy Transplanter (2 & 8 Rows)
Transplanter-Vegetable & Tobacco
Post Hole Digger(4” to 14”Augers)

KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 16 of 20
Part No
Part Name
Part No
Part Name
27
Push Rod (Front Trigger Handle)
59
Capacitance
28
Carbon brush
60
Screw 5x18 HEX
29
Brush holder
61
Washer (Blade)
30
Motor Upper support
62
Spacer (Blading Adjusting)
31
Bearing-607-ZZ
63
Nut-M5 Nylon
32
Rotor
KisanKraft®
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 5of 20
Product
Hedge Trimmer-
Electric
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-HTE-600
WARRANTY
PERIOD
6-MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERYWHICHEVER IS
EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s
Sign
Dealer’s Sign
What is covered: KisanKraft Limited and its manufacturers warrant this product to be
free from defects in material or workmanship. All parts defective in material and
workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its
manufacturers at the premises of Authorized Dealers, of such parts as appear to
KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to trade
accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor its authorized dealers assumes any
responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of
machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical
damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7)
Improper set up, adjustments, tampering or altered products
Note: The purchase is not contingent upon a product demonstration. The
purchaser shall satisfy himself with the product, including any product
demonstration or verification of any function, before buying. KisanKraft Limited or
its authorized dealers, including online sellers, shall not be liable to give any on-
site demonstration after purchase of any of the product.

KisanKraft®
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (formerly known as KisanKraft Machine Tools P Ltd)
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 6 of 20
Important: (1) Normal maintenance and adjustments to the product is the
responsibility of thecustomer. (2) Normal wear and tear is notcoveredunder warranty.
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the
warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be
liable for general damages, including bodily injuries, or for incidental or consequential
damages including, but not limited to, loss of use, loss of profits, loss of production,
expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranty hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter the
obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended
to the first end user (original purchaser), and no warranty is made, nor authorized to
be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of
any obligation under this warranty for failure during the applicable warranty period,
deliver the defective product, to the nearest Authorized Dealer. KisanKraft Limited, its
manufacturers and its dealers reserve the right to inspect the claimed defective part(s)
to determine if the malfunction isthe result of a defect covered by this warranty. Please
note that the decision of KisanKraft Limited with respect to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGardenTools
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines
KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 15 of 20
PARTS LIST
Part No
Part Name
Part No
Part Name
1
Power cable
33
Bearing 608 ZZ
2
Cable Sheath
34
Stator
3
Left Handle
35
motor Lower support
4
Self-tapping Screw
36
Stator screw
5
Cable Pressboard
37
Gear Case Upper
6
S.T Screw
38
Output shaft
7
Power Indicator
39
Blade Cover
8
Indicator Cover
40
Gear Wheel
9
Switch on/off
41
Base Plate (Thin)
10
Spring (Push Button)
42
Blade assembly
11
Handle Lock Button
43
Screw 5x30 Hex
12
Cover (Left Housing)
44
Eccentric wheel
13
S.T Screw
45
Base Plate (Thick)
14
Left Housing
46
Locating pin
15
Screw 5x15 star & nut
47
Snap ring for shaft
16
Screw 6x14 Star
48
Bearing-606- ZZ
17
Front Handle
49
Gear Case Cover
18
Spring (Assist Handle)
50
Screw 4x18 Star
19
Front Trigger Handle
51
Right Handle
20
Protecting Cover
52
Right Housing
21
Trigger Spring
53
Cover (Right Housing)
22
Switch Trigger
54
Connection line 1
23
Push Rod (Trigger)
55
Connection line 2
24
Wire Protect Plate
56
Connection line 3
25
Holder (Pin Push Rod)
57
Connection line 4
26
Pin (Push Rod)
58
Connection line 5

KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 14 of 20
PARTS DIAGRAM
KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 7 of 20
BEFORE GETTING STARTED
Your Lithium Ion Electric Hedge Trimmer has been designed for trimming light foliage. It is
intended for DIY (Do It Yourself) use only. It is not built for continuous daily use in a trade
or professional capacity. Please read and follow the instructions in this manual before using
the machine. The user should be familiar with the safety notices, machine performance, and
maintenance, etc. The operationmanual will beused later incaseof any repair, accessories
replacement, and accessories procurement, so preserve it carefully.
OVERVIEW
1. Rear Handle On/Off Switch
2. Rear Handle (with soft grip)
3. Front Handle On/Off Switch
4. Safety Guard
5. Dual action cutting blade
6. Blade cover
7. Rear handle rotating slide
switch
8. Power Supply Led Indicator
SAFETY INSTRUCTIONS
WARNING: Read all the safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Note: The term “power tool” in all of the warnings refers to your mains-operated (corded)
power tool or battery –operated (corded) power tool.
1. Work area safety:
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. Electrical Safety:

KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 8 of 20
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce the risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal Safety:
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
Equipment such as dust mask, anti-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and /or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or j jewellery .Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or long
hair can be caught in m moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust –related hazards.
4. Power tool use and care:
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/ or the battery pack from
the power tool before making any adjustments, changing accessories, or
KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 13 of 20
TECHNICAL SPECIFICATIONS
Parameter
Details
Engine Type
Electrical
Input Volt
230 V~50Hz
Rated Power
600 watts
No Load Speed
330/min
Cutting width
600mm
Tooth Space
20mm
Max cutting diameter
16 mm
Cutting length
520mm
Voltage stabilizer (Recommended)
1kw (min)

KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 12 of 20
9. Trimming the top
Where the branches have grown extremely long, cut back the hedge inseveralstages.
The shorter the cuttings the better suited they are for composting.
10. General information
When older hedges are to be cut back a substantial amount, use pruning shears
or some other device to trim thicker branches (greater than 15mm diameter) to
the desired length before starting work with the hedge trimmer.
To shape precisely, run a taught line between the extreme edges of the hedge
and then trim along the length of the line.
Ensure the dual action cutting blades (5) do not come into contact with any object
made of hard material that could damage the blades, such as fencing wire or
metallic plant supports.
When the task is complete, turn off the tool, slip on the blade cover (6).
MAINTENANCE
1. When not in use, the tool shouldbe stored in a dry, frost-free location, out of reach
of children.
2. Keep ventilation slots of the trimmer clean at all times and prevent any foreign
matter from entering.
3. If the housing of the trimmer requires cleaning, use amoist soft cloth, but not any
solvents.
4. The blade rail should be cleaned and treated with light machine oil or spray
lubricant after each use. The lubrication will also help prevent corrosion of the
blade when not in use. When a job lasts for a longer period of time it is
recommended that the blade rail also be treated with spray lubricant at regular
intervals during operation.
Note: The blades are not covered by warranty- any damage to or sharpening of
the blades is the responsibility of the user.
KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 9 of 20
storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
5. Service :
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that thesafety of the power tool is,
maintained.
b) If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Additional safety rules:
This appliance is not intended for use by young children or infirm persons unless
they have been adequately supervised by a responsible person to ensure that
they can use the appliance safely.
Young children should be supervised to ensure that they do not play with the
appliance.
Never allow children or people unfamiliar with these instructions to use the
trimmer. Keep all parts of the body away from the cutter blade. Do not remove
cut material or hold material to be cut when the hedge trimmer is switched on.
Please switch off the hedge trimmer when clearing jammed material. Any attempt
to touch the blade while operating the hedge trimmer may result in serious
personal injury.
Carry the hedge trimmer by the handle with the cutter blade stopped. Please
ensure the blade cover (9) has been slipped on when the hedge trimmer is not in
use. Proper handling of the hedge trimmer will reduce possible personal injury
from the cutter blades.
ASSEMBLY
Warning: Stop the hedge trimmer before assembly.
Installing the Front Handle and Safety Guard:
1. Put the hedge trimmer on the leveled
surface. Your two hands grip the front
handle (3) and slide it into the slot on
the two sides of the trimmer.
2. Fix the Front Handle (3) tightly with the
two screws out of the package.

KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 10 of 20
3. Slide the safety guard (4) into the slots
at the end of the housing.
4. Fix the safety guard (4) with the on
board screw tightly.
OPERATION
1. Switching on and off
To prevent from accidental starting, this Hedge trimmer is designed with a two
hand safety switch.
To turn the Hedge trimmer ON both
the rear handle on/off switch (1) and
front handle on/off switch (3) are
required to be activated
To turn the hedge trimmer OFF, release either the rear handle on/off switch (1)
or front handle on/.off switch (3).
This hedge trimmer has a power supply led indicator (8) to show the power is on
when you insert the power cord to main power supply.
2. Blade Brake
The hedge trimmer is fitted with an electric brake which very quickly brings the
blades to a stop as soon as either the rear handle on/off switch (1) or front handle
on/off switch(3) are released.
This is an important safety feature that greatly reduces thechance of injury to the
operator if a hand slips off the front or rear handle and control is lost temporarily.
When the unit is switched off and the motor brake operates there may be some
sparking (or flashing) in the area of the upper motor ventilation slots. This is
normal and does not indicate any problem.
3. Working position adjustment
Maintain proper footing and balance and do not overreach.
KisanKraft®
Hedge Trimmer-Electric
Model-KK-HTE-600
: www.kisankraft.com
: info@kisankraft.com
: +91.80. 22178200
Page 11 of 20
Please wear safety goggles, anti-slip footwear and rubber gloves when trimming.
Hold the tool firmly with both the hands and turn the tool on by squeezing both
the switches.
Always hold the trimmer with one hand on the front handle (3) and one hand on
the rear handle (2).
This hedge trimmer has a max 90degree left and right rotating rear handle. You
can choose a comfortable grip direction for your trimming work.
Warning! Turn off the hedge trimmer before you do the adjustment.
To adjust the grip direction, you hold the front handle (3) by one hand. The other
hand grips the rear handle (2)
Note: Do not press the rearhandle on/offswitch (1) while you hold therear handle
(2).
Use the index fingerto slide the rear handle
rotating slide switch (7) backwards whilst
turn the rear handle (2) left or right. You
can choose to stop at 45degree or
90degree left and right.
Never hold the tool by the safety guard (4)
4. Trimming new growth
The most effective way to trim new growth is to use a wide sweeping motion,
feeding the blade teeth through the twigs.
A slight downward tilt of the blade, in the direction of motion gives the best cut.
Do not use the Trimmer for cutting stems greater than 15mm in diameter. Use
the trimmer only for cutting normal shrubbery found around houses and buildings.
5. Leveling hedges
Stretch a piece of string along the length of the hedgeas a guide when levelinghedges.
6. Side-trimming hedges
Begin at the bottom and cut in an upward sweeping action so that the debris falls away
from the trimmer and does not build up around the dual action cutting blades (5).
7. Shaping
A hedge should be trimmed to a trapezoidal form, that is, it should widen toward the
bottom at both sides. This improves the penetration of light to the lower extremities. A
general guideline is approximately a 10cm slant for each 1 meter of hedge height.
8. Cutting sequence
First cut both sides, starting at the bottom and work to the top to prevent cuttings from
falling into the area where you are still working.
Table of contents
Popular Trimmer manuals by other brands

Makita
Makita DUR181 instruction manual

Spear & Jackson
Spear & Jackson GT350 instruction manual

Craftsman
Craftsman WEEDWACKER 316.73193 Operator's manual

Yard Machines
Yard Machines MTD27P Operator's manual

Makita
Makita DUN501W instruction manual

Elem Garden Technic
Elem Garden Technic THE20VLI-510 Original instructions