KISANKRAFT KK-WPK-20 User manual

KisanKraft®
Warranty Certificate
(DEALER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 1 of 44
Product
Water Pump with
Petrol Start Kerosene
Run Engine
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-WPK-20
KK-WPK-30
With ISI ENGINE
KK-GE-160/200
WARRANTY
PERIOD
6-MONTHS
FOR THE SPECIFIED PERIOD FROM THE DATE
OF SALE OR DELIVERY WHICHEVER IS
EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign
Dealer’s Sign
What is covered: KisanKraft Machine Tools Private Limited and its manufacturers
warrant this product to be free from defects in material or workmanship. All parts
defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Machine Tools Private
Limited or its manufacturers at the premises of Authorized Dealers, of such parts as
appear to KisanKraft or its manufacturers, upon inspection, to be defective in material
and/or workmanship. KisanKraft or its manufacturers make no warranty with respect to
trade accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Machine Tools Private Limited nor any of its manufacturers, nor its authorized dealers
assumes any responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of
machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical
damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7)
Improper set up, adjustments, tampering or altered products

KisanKraft®
Warranty Certificate
(DEALER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com
: [e-mail]
: +91.80.22178200
Page 2 of 44
Important: (1) Normal maintenance and adjustments to the product is the
responsibility of the customer. (2) Normal wear and tear is not covered under warranty
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the
warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Machine Tools Private Limited or its
manufacturers will not be liable for general damages, including bodily injuries, or for
incidental or consequential damages including, but not limited to, loss of use, loss of
profits, loss of production, expense of substitute equipment or other commercial loss
or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranties hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Machine Tools Private Limited or any of its manufacturers has the authority
to increase or alter the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended
to the first end user (original purchaser), and no warranty is made, nor authorized to
be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of
any obligation under this warranty for failure during the applicable warranty period,
deliver the defective product, to the nearest Authorized Dealer. KisanKraft Machine
Tools Private Limited, its manufacturers and its dealers reserve the right to inspect the
claimed defective part(s) to determine if the malfunction is the result of a defect
covered by this warranty. Please note that the decision of KisanKraft Machine Tools
Pvt Ltd with respect to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGardenTools
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines

KisanKraft®
Water Pumps
with
Petrol Start Kerosene Run Engine
KK-WPK-20 / 30
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 3 of 44
Operation Manual
With ISI ENGINE
KK-GE-160/200
KisanKraft Machine Tools Pvt. Ltd.
Sri Huchhanna Tower, #4,1st Main,7-A Cross, Maruthi Layout, Dasarahalli,
HAF Post, Hebbal, Bangalore 560024,Karnataka,INDIA
♦Bangalore (HO) ♦Ahmedabad ♦Bhopal ♦Bhubaneswar ♦Coimbatore ♦
♦Ernakulam ♦Guwahati ♦Mandi-HP ♦Patna ♦Hinudpur ♦Hubli ♦Hyderabad ♦
♦Jaipur ♦Karnal ♦Kolkata ♦Lucknow ♦Nagpur ♦Pune ♦Raipur ♦Shimla ♦

KisanKraft®
Water Pumps
with
Petrol Start Kerosene Run Engine
KK-WPK-20 / 30
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 4 of 44
CONTENTS
BEFORE GETTING STARTED............................................................................ 7
SAFETY INSTRUCTIONS.................................................................................. 7
OPERATION................................................................................................... 7
PREPARATION BEFORE OPERATION:...................................................................................... 7
STARTING THE ENGINE.......................................................................................................... 8
USE....................................................................................................................................... 8
STOPPING THE ENGINE.......................................................................................................... 8
MAINTENANCE.............................................................................................. 8
STORAGE....................................................................................................... 9
TROUBLESHOOTING ...................................................................................... 9
TECHNICAL SPECIFICATIONS........................................................................ 10
WATER PUMP PARTS DIAGRAM-KK-WPK-20/30 ......................................... 11
WATER PUMP PARTS LIST-KK-WPK-20/30................................................... 12
OPERATION MANUAL KEROSENE ENGINE ................................................... 13

KisanKraft®
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 5of 44
Product
Water Pump with
Petrol Start
Kerosene Run
Engine
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-WPK-20
KK-WPK-30
With ISI ENGINE
KK-GE-160/200
WARRANTY
PERIOD
6-MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER
IS EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN, etc.):
Buyer’s Sign
Dealer’s
Sign
What is covered: KisanKraft Machine Tools Private Limited and its manufacturers
warrant this product to be free from defects in material or workmanship. All parts
defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Machine Tools Private
Limited or its manufacturers at the premises of Authorized Dealers, of such parts as
appear to KisanKraft or its manufacturers, upon inspection, to be defective in
material and/or workmanship. KisanKraft or its manufacturers make no warranty with
respect to trade accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither
KisanKraft Machine Tools Private Limited nor any of its manufacturers, nor its
authorized dealers assumes any responsibility, if the failure was caused by the
following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of
machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or
physical damage, (6) Repairs made by unauthorized parties and/or with
unauthorized parts, (7) Improper set up, adjustments, tampering or altered products

KisanKraft®
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Machine Tools Private Limited
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 6 of 44
Important: (1) Normal maintenance and adjustments to the product is the
responsibility of the customer. (2) Normal wear and tear is not covered under
warranty.
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the
warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Machine Tools Private Limited or its
manufacturers will not be liable for general damages, including bodily injuries, or for
incidental or consequential damages including, but not limited to, loss of use, loss of
profits, loss of production, expense of substitute equipment or other commercial loss
or damage.
Limitation of Liability: This limited warranty is in lieu of all other express
warranties, obligations, or liabilities. Any implied warranties, obligations or liabilities,
including, but not limited to, any implied warranty of merchantability shall be limited
in duration to the applicable warranty period. Any action for breach of any warranty
hereunder, including, but not limited to, any implied warranty of merchantability must
be brought within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Machine Tools Private Limited or any of its manufacturers has the
authority to increase or alter the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended
to the first end user (original purchaser), and no warranty is made, nor authorized to
be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of
any obligation under this warranty for failure during the applicable warranty period,
deliver the defective product, to the nearest Authorized Dealer. KisanKraft Machine
Tools Private Limited, its manufacturers and its dealers reserve the right to inspect
the claimed defective part(s) to determine if the malfunction is the result of a defect
covered by this warranty. Please note that the decision of KisanKraft Machine Tools
Pvt Ltd with respect to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGardenTools
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines

KisanKraft®
Water Pumps
with
Petrol Start Kerosene Run Engine
KK-WPK-20 / 30
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 7 of 44
BEFORE GETTING STARTED
Thank you for your purchase and use of our products. In order to avoid accidents or injury,
please read this manual carefully before using the machine. After reading, preserve it for
further reference.
This Water pump is characterized by light weight, simple structure high efficiency,
convenient use and flexible movement. It can be used for agricultural irrigation, drainage
construction and pumping, especially widely used in recurrent irrigation of small area for
agricultural production at present.
SAFETY INSTRUCTIONS
1. Read the operation manual carefully before starting the engine in order to avoid
any accident and damage.
2. Please do not use this engine inside an enclosed area. Ensure adequate
ventilation while Engine is in operation.
3. To prevent fire hazard, please keep the Engine in operation at least 1-meter (3
feet) away from Combustible or Inflammable materials, buildings and
equipment.
4. When refueling you must STOP the Engine. Please do not smoke near Engine.
Wipe the spilled fuel after refueling.
CAUTION: Spilled fuel is a fire hazard.
5. Always place the engine horizontally. Do NOT tilt the Engine more than 21
degrees Overturning or inclining the engine may cause oil spillage and result in
fire hazard.
6. Do NOT cover the Engine when in operation.
7. Children are strictly not allowed near the engine operation area.
OPERATION
PREPARATION BEFORE OPERATION:
1. Connect the suction pipe:
•Place the filter into the empennage of the suction pipe with the tie-in.
•Place another end into the input with the tie-in.
2. Connect the discharging pipe:
Place the discharging pipe into the output with the tie-in.
3. Check the oil:
•Check the oil lever in the case that the engine is off and horizontal.
4. Check the fuel level:
•Open the crankcase cover to check the fuel level. Please add fuel when the
lever is low.
5. Check the air cleaner:
•Disconnect the papilionaceous (flower petal like) nut washer and air cleaner
filter.

KisanKraft®
Water Pumps
with
Petrol Start Kerosene Run Engine
KK-WPK-20 / 30
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 8 of 44
•Check whether the foam filter element is dirty or air logged. Clean it if
necessary.
•Newly equip the air cleaner and operate the engine until it is well equipped.
•It would accelerate the abrasion if the dust or the pollutant is absorbed into the
engine through carburetor.
6. Check the water pump:
•Check whether the water is added into the pump.
•The pump must be fully filled with water before operating.
•Operate the pump until the water is added so as to protect the air proof from the
overheating in lasting operation without water.
STARTING THE ENGINE
1. Keep the fuel valve to “ON” position.
2. Shut down the throttle (throttle may be partly closing or open when the engine is
warm or in the case of high temperature).
3. Keep the switch in the ON position.
4. Slowly move the regulating handle to the left.
5. Pull the start handgrip when feeling the resistance, then drawback swiftly.
USE
The use of the water pump:
1. Gradually open the throttle when the engine’s warm.
2. Set a scheduled rotation speed.
STOPPING THE ENGINE
1. Move the regulating handle to the right.
2. Keep the switch in the “OFF” position.
3. Turn off the fuel valve.
MAINTENANCE
Oil:
Change the oil and quickly discharge the oil when the engine is hot. Replace the oil for the
first time after 50 hours of cumulative operation. After that, replace the oil per 500 hours
operation. The specific procedure is as follows:
•Disconnect the oil cap and drain plug, then discharge the oil, newly equip the
drain plug and screw it down.
•Add the clean oil to the appointed oil level.
Air cleaner filter:
Air flow in the carburetor is reduced if air cleaner is dirty. In order to clean it:
•Move the papilionaceous nut, and disconnect the air cleaner filter cover and the
foam filter element with apyrous cleaning and then air dry it.
•Dip the foam filter element into the clean oil and extrude the additional oil.
Newly equip the foam filter element and air cleaner filter.
Spark plug:

KisanKraft®
Water Pumps
with
Petrol Start Kerosene Run Engine
KK-WPK-20 / 30
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 9 of 44
It would be kept 0.7-0.8 mm between the spark plug and no carbon so as to assure the
normal running
STORAGE
Cool the engine and keep the fuel valve in the “OFF” position before moving or storing
indoors to avoid the burning or fire.
1. Keep the storage place dry and less dust.
2. Clean the inner parts of the engine.
3. Replace the oil after completely discharging the fuel tank and the carburetor.
4. Disconnect the spark plug to infuse 2-3 grams of oil into the cylinder and rotate
the engine 3-4 times and then equip the spark plug.
5. Cover the pump cover to avoid dust.
TROUBLESHOOTING
Problem
Probable cause
Action to be taken
The Engine can’t be
started
Refer the Engine manual
Refer the Engine manual
The pump cannot
pump water
The water infused is not enough
Fill the pump with enough
water.
The filter is air –logged.
Clear the air from the filter.
The tie-in is not firmly equipped ,
Suction pile is leaking.
Ensure proper suction
Packing is proper and leak
free.
The pipe is damaged.
Replace the pipe.
Whether the head lift is too high
Never exceed the rated
max. Lift, if so lower the
head lift.
Insufficient flux
Any block with impeller or
strainer
Remove the blockage in
the strainer
Gas leakage in inlet pipe
Fix any leakage in the pipe
Damage in impeller
Replace the impeller

KisanKraft®
Water Pumps
with
Petrol Start Kerosene Run Engine
KK-WPK-20 / 30
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 10 of 44
TECHNICAL SPECIFICATIONS
Model
KK-WPK-20
KK-WPK-30
kW (hp)
2.5kW (3.3 hp)
3 kW(4.1hp)
Displacement
163 cc
196 cc
Engine Type
4-stroke
Engine model
KK-GE-160
KK-GE-200
Rated rotation speed
3600 (rpm)
Fuel Used
Petrol start & kerosene run
Fuel Tank Capacity
100 ml (Petrol) & 3 Litre (Kerosene)
Oil
For Engine-550 ml (20w 40 Grade)
Net Weight
26 kg
28 kg
Fuel Consumption
750 ml (Engine)/hour
1000 ml (Engine)/hour
Max flow
7 liter/sec
8.5 liter/sec
Delivery (horizontal)
24 m (delivery distance)
Suction (vertical)
6 m(depth)
Max discharge capacity
27000 liters/hour
45000 liters/hour
Inlet/outlet port dia
50 mm (2”)
80 mm (3”)

KisanKraft®
Water Pumps
with
Petrol Start Kerosene Run Engine
KK-WPK-20 / 30
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 11 of 44
WATER PUMP PARTS DIAGRAM-KK-WPK-20/30

KisanKraft®
Water Pumps
with
Petrol Start Kerosene Run Engine
KK-WPK-20 / 30
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 12 of 44
WATERPUMP PARTS LIST-KK-WPK-20/30
Part No
Part Name
Part No
Part Name
13-1
Water Pump Parts
13-1.14
O-Ring
13-1.1
Pump Cover
13-1.15
Pump body
13-1.2
Water Seal ass.
13-1.16
rubber gasket, Triangle flange
13-1.2.1
Static water seal ass.
13-1.17
Triangle flange
13-1.2.2
Dynamic water seal ass.
13-1.18
Bolt
13-1.2.2.1
Rubber seal, Ceramic seal
body
13-1.19
Flange nut
13-1.2.2.2
Ceramic seal body
13-1.2
Rubber gasket, inlet and outlet
pipe
13-1.3
Bolt
13-1.21
Inlet and outlet pipe
13-1.4
Rubber gasket
13-1.22
Pipe hoop
13-1.5
washer
13-1.23
Rectangular rubber gasket
13-1.6
Bolt
13-1.24
Bolt
13-1.7
washer
13-1.25
Pump Elbow
13-1.8
Flat Key
13-1.26
Rubber Plug ass.
13-1.9
Impeller
13-1.26.1
Rubber Plug ass.
13-1.1
washer
13-1.26.2
O-Ring
13-1.11
Bolt
13-1.27
Cover, Taper filter
13-1.12
Turbine
13-1.28
Taper filter
13-1.13
O-Ring
Part No
Part Name
14-1
Water Pump Parts
14-2
Frame absorber
14-3
Nut
14-4
Spring washer
14-5
washer
14-6
Bolt
14-7
Bolt

KisanKraft®
ENGINE-Petrol Start Kerosene Run
KK-GE-160 / 200
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 13 of 44
OPERATION MANUAL KEROSENE ENGINE
KK-GE-160/200

KisanKraft®
ENGINE-Petrol Start Kerosene Run
KK-GE-160 / 200
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 14 of 44
BEFORE GETTING STARTED
Thank you for your purchase and use of our products. In order to avoid accidents or injury,
please read this manual carefully before using the machine. After reading, preserve it
for further reference.
SAFETY INSTRUCTIONS
1. Please do not use this engine
inside an enclosed area. Ensure
adequate ventilation while Engine
is in operation.
CAUTION: Exhaust contains
POISONOUS Carbon Mono Oxide gas
2. To prevent fire hazard, please
keep the Engine in operation at
least 1-meter (3 feet) away from
Combustible or Inflammable
materials, buildings and
equipment.
3. When refueling you must STOP
the Engine. Please do not smoke
near Engine. Wipe the spilled fuel
after refueling.
CAUTION: Spilled fuel is a fire hazard.
4. Do NOT cover the Engine when in
operation!
5. Do NOT connect any pipe to
exhaust muffler!
6. Do NOT tilt the Engine more than
21 degrees.

KisanKraft®
ENGINE-Petrol Start Kerosene Run
KK-GE-160 / 200
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 15 of 44
ENGINE COMPONENTS
KK-GE-160
1. Recoil Starter
2. Engine Switch
3. Fuel Tank
4. Kerosene Tank Cap
5. Petrol Tank Cap
6. Spark Plug
7. Oil Alert Lamp
8. PTO Shaft
9. Engine Oil Filter Cap
10. Engine Oil Drain Bolt
11. Air Cleaner
12. Choke
13. Muffler
14. Fuel Cock
15. Throttle Weaver
16. Drain Cock
KK-GE-200
1. Throttle Lever
2. Engine Drain Bolt
3. Drain Cock
4. Choke Rod
5. Air Cleaner
6. Petrol Tank Cap
7. Kerosene Tank Cap
8. Fuel Cock
9. Engine Oil Filter Cap
10. Engine Switch
11. Spark Plug
12. P.T.O. Shaft
13. Muffler
14. Fuel Tank
15. Recoil Starter

KisanKraft®
ENGINE-Petrol Start Kerosene Run
KK-GE-160 / 200
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 16 of 44
OPERATION
Pre-Operation Checks
Oil Level:
Please check the Engine Oil Level by putting
the engine on a flat surface
If the oil level looks low, please check the Oil
Level.
Add oil to the recommended level
Remember to tighten the Oil cap!
Recommended Engine Oil
SAE 10W-40 or SAE 20W-40
API Classification: SF Minimum
If the OIL level in crankcase falls below a
safe limit, then Oil Alert level system will
automatically turn off the Engine.
NOTE: The Engine will not start if the Oil
Alert Level System has turned off the
Engine.
You will need to fill OIL to the recommended
level, before you can restart the Engine.

KisanKraft®
ENGINE-Petrol Start Kerosene Run
KK-GE-160 / 200
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 17 of 44
Fuel Level:
Check the fuel level before starting the
Engine.
Add fuel, if the level is low
Fill fuel to the shoulder of fuel filter.
CAUTION:
(1) Do not put Kerosene in Petrol tank,
otherwise Engine will be very hard to start.
(2) Do not put Petrol with Oil-mixed in it.
(3) Do not put dirty, contaminated fuel
Air Filter:
Open Air-cleaner cover and remove the air
cleaner element.
Check for dust/dirt in the air filter.
If it is dirty you should clean it as shown
below.

KisanKraft®
ENGINE-Petrol Start Kerosene Run
KK-GE-160 / 200
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 18 of 44
Clean air filter element and refit it in the Air-filter
of the engine.
Starting the Engine (COLD START):
1. Turn the Engine switch to ON
position
2. Put the choke in the shown
position.
3. Turn the Drain Cock to ON
position and drain the
Kerosene from the
carburetor.
4. Turn the Drain Cock to OFF
position after you have
drained the Kerosene.
5. Return the Kerosene to the
Kerosene Tank.
6. Turn the Fuel Cock to
START / ON position

KisanKraft®
ENGINE-Petrol Start Kerosene Run
KK-GE-160 / 200
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 19 of 44
7. Increase the throttle
(accelerator) level slightly
8. Make sure that there is no
(minimum) load attached to
the Engine
9. Pull the starter grip, until you
feel the resistance
10. Then pull the rope fast
11. Do not leave the rope. Do not
allow rope to snap back.
12. Return the rope slowly, by
hand, to the recoil starter
13. Turn the fuel cock to RUN
position.
14. Close the choke as indicated
on the Engine.

KisanKraft®
ENGINE-Petrol Start Kerosene Run
KK-GE-160 / 200
: www.kisankraft.com
: [e-mail]
: +91.80. 22178200
Page 20 of 44
Starting the Engine (HOT START):
1. Turn the Engine switch to ON
position
2. Close the choke as indicated on
the Engine
3. Raise the throttle lever slightly
4. Make sure that there is no
(minimum) load attached to the
Engine.
5. Turn the Fuel Cock to RUN / ON
position.
6. Pull the starter grip, until you feel
the resistance
7. Then pull the rope fast.
8. Do not leave the rope. Do not
allow the rope to snap back.
Return the rope slowly, by hand, to the
recoil starter
Stopping the Engine:
1. Move the throttle
(accelerator) lever fully
down.