Kitchen Cabinet Distributors SRI9-SC IN A B09 Administrator Guide

HOW TO GUIDE:
6) ATTACH INSERT TO DOOR
5) INSTALL DRAWER CLIPS
Install the drawer clips to the underside of the
insert. Line up the insert to check fitment.
4) SECURE SLIDES TO B09
Place the slides into the brackets and secure them
to the sides of the B09. Use a level when securing
the upper slide. Adjustments may be needed
later.
3) SPICE RACK INSERT
Place the additional shelves & rails to the side.
2) ASSEMBLE THE B09 CABINET
See our assembly video for more details
kcdus.com/assembly-videos-2/
1) MEASURE THE BRACKET PLACEMENT
Review the measurements on the next page to place
the brackets properly on the back of the B09 cabinet.
Screw them onto the back and continue to build the
B09 cabinet.
Check for even spacing when attaching the
insert to the door. Secure using the screws.
View the next page for measurements.
7) ADD ADDITIONAL SHELVES
Remove the spice rack from the cabinet to insert
the additional shelves.
8) INSERT THE RACK AND CHECK FITMENT
If the door's alignment is off, you may need to adjust the
upper slide. If the upper slide bracket is moved up or down,
ensure the slide remains level by adjusting the front of the
slide where it attaches to the face frame. See next page*
INSTALLING SRI9-SC IN A B09

INSTALLING SRI9-SC IN A B09
HOW TO GUIDE:
*IF ADJUSTMENTS ARE NEEDED
You may have to unscrew from the face frame of
the cabinet and shift the screw placement up or
down from the original placement.