KitchenAid KUDC10FXSS User manual

Stainless Steel Wash Arms
Four stainless steel wash arms are an industry exclusive
and part of the quality KitchenAid performance features
that demonstrate the highest level of craftsmanship in
each of our products.
AquaSense™Fill System
A sensor assesses water pressure before the selected cycle
begins, ensuring the optimal amount of water for superior
results, regardless of the cycle selected.
Adjustable Upper Rack with Manual Adjusters
Manual adjusters allow the rack to easily roll out and
adjust to one of two pre-set positions, making more room
for loading dishes.
Stainless Steel
KUDC10FXSS
Classic Series Dishwasher
Architect®Series II
KUDC10FX – 52 dBA**
Performance
• Built-In Hard Food Disposer
• 4 Cycles (Heavy Duty, Normal, One Hour Wash,
Rinse Only)
• 3 Options (Hi-Temp Scrub, Heat Dry, Control Lock)
• Dedicated Drying System with Heat Dry Option
• Optimum Wash Sensor
• AquaSense™ Fill System
• Whisper Quiet® 52 Sound Insulation System
Craftsmanship & Design
• Fully Integrated Console
• Architect® Series II Handle
• Tall Tub with Stainless Steel Interior
• 4 Stainless Steel Wash Arms
• 14 Place Setting Capacity
• Light-Touch Controls with Audio Feedback
• Status Lights
• Flood Protection Technology
• ENERGY STAR® Qualied
• CEE Tier 2 Qualied
Upper and Lower Racks
• DuraKote™ Nylon-Coated Racks
• Cushion-Tip™ Tines
Upper Rack
• Adjustable with Manual Adjusters
• Robust Handle
• 2 Sure-Hold® Light Items Clips
Lower Rack
• Fold-Down Row with Three-Position Tines
• Silverware Basket
Colors
• White (WH), Black (BL), Stainless Steel (SS)
25% Better Results
vs. the Competition*
*Combined wash and dry results of leading premium brands’
highest MSRP models; dry testing conducted without rinse aid.
** Per IEC standards, normal cycle.
®ENERGY STAR is a U.S. registered mark.

®Registered trademark/™Trademark/the shape of the stand mixer is a registered trademark of KitchenAid, U.S.A.
©2010. All rights reserved.
KitchenAid • Benton Harbor, Michigan 49022 U.S.A.
®ENERGY STAR is a U.S. registered mark.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
07/10 (29768RC0710)
KUDC10FX
For additional information about KitchenAid®appliances, visit KitchenAid.com
or call the Customer Experience Center at 800-422-1230. We’ll help you select the
ideal model and answer questions about appliance operation and performance.
Classic Series Dishwasher
PRODUCT DIMENSIONS
115/16"
337/8" Min. –
341/2" Max.
237/8"
Recessed
width
241/2"
491/2"
313/16"
Towel Bar Handle
Stainless Steel – W10320831
HaNDlE
The following handle is available
as an optional accessory.
Cut openings in shaded area of cabinet
walls or floor as specified in chart:
Measured from the lowest point on the
underside of countertop. May be reduced to
337/8" by removing wheels from dishwasher.
Minimum, measured from narrowest point
of opening.
***
*
**
May be increased to 67/8" if height of opening
is 341/2" at its lowest point.
24"**
24" Min.
All surfaces must be free
from intrusions.
OPENING FOR: DIAMETER:
water line
drain line
direct wire
power supply cord
1/2"
11/2"
3/4"
11/2"
34" Min.*
31/4"
51/2"
2"
6"***
23/4" 31/4"
9" 2"
10"
31/4" 23/4"
6"***
31/4"
2"
CUTOUT DIMENSIONS