KitchenAid 720-0745B Product information sheet

FREESTANDING OUTDOOR GRILL
Installation Instructions and Use & Care Guide
For questions about features, operation/performance, parts, accessories or service, call: 1-877-373-2301
or visit our website at www.Kitchenaidgrills.com
ASADOR AUTÓNOMO PARA EXTERIOR
Instrucciones de instalación y Manual de uso y cuidado
Para consultas respecto a características, funcionamiento, rendimiento, piezas, accesorios o servicio técnico, llame al: 1-877-373-2301
o visite nuestro sitio de internet en www.Kitchenaidgrills.com
COMPTOIR POUR GRIL D'EXTÉRIEUR
AUTOPORTANT
Instructions d’installation et Guide d’utilisation et d’entretien
Pour des questions à propos des caractéristiques, du fonctionnement/rendement, des pièces, des accessoires ou du service,
composer le : 1-877-373-2301
ou visitez notre site web www.Kitchenaidgrills.com
Table of Contents/Índice/Table des matières..................................................................2
720-0745B (LP) 730-0745B (NG)
19000429A1

2
ÍNDICE
SEGURIDAD DELASADORPARAEXTERIORE….......35
REQUISITOSDEINSTALACIÓN…………..………………..37
Herramientasypiezas ……………...………………...……….37
Requisitosdeubicación ……………………………...……….37
Medidasdelproducto ……………………………….………38
Requisitosdelsuministrodegas ………………………….....39
Requisitosparalaconexióndegas …………………...…….40
PIEZASDEREPUESTO ……………………………...………41
ToolslosTornillospre-ensambladoslisto………………..….44
PaqueteListaDeContenido………………….............……45
INSTRUCCIONESDEINSTALACIÓN ……………….……..46
Instalacióndelasadorautónomoparaexteriores.........….46
Conexióndelsuministrodegas ………………………50
CONVERSIONESDEGAS ……………………………..….52
Herramientasypiezasparalaconversióndegas..........….52
ConversióndegasLPagasnatural …………………………52
Reviseyregulelosquemadores ……………………...……...55
USODELASADORPARA EXTERIORES …………………...56
Cómousarelasadorparaexteriores …………………………..56
Usodelmecherolateral…... …... …...……...………...58
CONSEJOSPARA ASARALAIRELIBRE …………………..59
Métodosdecocción ………………………………………...…...59
Cuadroparaasar ……………………………………………...….60
CUIDADODELASADORPARA EXTERIORES ………….….62
Cómoreemplazarlabater adelencendedor …………………62
Limpiezageneral ………………………………………………….62
SOLUCIÓNDEPROBLEMAS.................................................64
ASISTENCIA………………………………………………..……..65
GARANTÍA …………………………………………………..…....65
SÉCURITÉDU GRILD'EXTÉRIEUR ………………….……68
EXIGENCESD’INSTALLATION …………………………..…70
Outilsetpièces ……………...……………………………...….70
Exigencesd'emplacement ……………………………………70
Dimensionsdu produit ……………………………………...…..71
Spécificationsdel'alimentation engaz ………………..……72
Exigencesconcernantleraccordementaugaz………………73
PIÈCES DERECHANGE …………………………………...…74
Contenu du colis…………………………………………...…….78
Touslespre-assemblylistevis……………………………..…..79
INSTRUCTIONSD’INSTALLATION ……………….……...….80
Installationdugrild’extérieurautoportant …………..………..80
Raccordementaugaz …………………………............…..….83
CONVERSIONSPOURCHANGEMENTDEGAZ …….…....85
Outilsetpiècespourconversiondegaz ………….……..…...85
Conversiondepropane àgaznaturel ……………….…...…...86
Contrôleet réglagedesbrûleurs ……………………….……...88
TABLE DES MATIÈRES
UTILISATIONDU GRILD’EXTÉRIEUR …….………………...89
Utilisationdugril d’extérieur …………………………………….90
Utilisationdevotrebrûleurlatéral……………………..………...91
CONSEILSPOUR L'UTILISATIONDUGRIL
D’EXTÉRIEUR……………………………………...……….….…92
Méthodesdecuisson ……………………………...………….…92
Tableau decuissonaugril ………………………...……...….….93
ENTRETIENDU GRILD’EXTÉRIEUR ……………………...…96
Remplacementdelapiledel’allumeur ………………………..96
Nettoyagegénéral …………………………………….……….…96
DÉPANNAGE........................................................................98
ASSISTANCE……………………………………………….……98
GARANTIE…………………………………………………...…....99
OUTDOORGRILL SAFETY………………………………3
INSTALLATIONREQUIREMENTS………………………....5
Toolsand Parts……………...…………………………………5
Location requirements…………………………………..…….5
ProductDimensions……………………………….………….6
GasSupplyRequirements……………………………………7
GasConnectionRequirements………………………………7
REPLACEMENTPARTS……………………………………9
ALL PRE-ASSEMBLYLIST……………...………………….11
PACKAGECONTENTSLIST…………………...……………12
INSTALLATIONINSTRUCTIONS…………………….…...…13
Freestanding OutdoorGrill Installation…………………….13
MakeGasConnection…………………………...……..……16
GASCONVERSION………………………………….............19
Toolsand PartsforGasConversion …………………....19
Conversion fromLPGastoNaturalGas………………….19
Check and Adjusttheburners………………………….……22
TABLE OFCONTENTS
OUTDOORGRILLUSE …………………………………………23
UsingYourOutdoorGrill ………………………………..….…23
UsingYourSideBurner…………………………………..……25
TIPSFOROUTDOORGRILLING ……………………….…..26
Cooking Methods ………………….………………………...….27
GrillingChart ………………………….……………………....….27
OUTDOORGRILLCARE …………………………………..…29
ReplacingtheIgniterBattery …….………………….………....29
GeneralCleaning ………………………………………..........…29
TROUBLESHOOTING .........................................................31
ASSISTANCE ……………………………………………..……31
Accessories………………………………………………………..31
WARRANTY …………………………………………….…..…….32

3
OUTDOOR GRILL SAFETY
IMPORTANT: This grill is manufactured for outdoor use only. For grills that are to be used at elevations above 2000 ft (609.6 m) orifice
conversion is required. See “Gas Supply Requirements” section. It is the responsibility of the installer to comply with the minimum
installation clearances specified on the model/serial rating plate. The model/serial rating plate for freestanding models can be found
inside left-hand cabinet door.
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, keep away from the
appliance and immediately call your
gas supplier or your fire department.
DANGER
WARNING
1. Do not store or use gasoline or other
flammable liquids or vapors in the
vicinity of this or any other appliance.
2. An LP cylinder not connected for use
shall not be stored in the vicinity of
this or any other appliance.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
In the State of Massachusetts, the following installation instructions apply:
■
Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by
the State of Massachusetts.
■
If using a ball valve, it shall be a T-handle type.
■
A flexible gas connector, when used, must not exceed 3 feet.

4
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the outdoor cooking
gas appliance, follow basic precautions, including the
following:
■ Do not install portable or built-in outdoor cooking gas
appliances in or on a recreational vehicle, portable trailer,
boat or in any other moving installation.
■ Always maintain minimum clearances from combustible
construction, see “Location Requirements” section.
■ The outdoor cooking gas appliance shall not be located
under overhead unprotected combustible construction.
■ This outdoor cooking gas appliance shall be used only
outdoors and shall not be used in a building, garage, or any
other enclosed area.
■ Keep any electrical supply cord and fuel supply hose away
from any heated surfaces.
■ Keep outdoor cooking gas appliance area clear and free
from combustible materials, gasoline and other flammable
vapors and liquids.
■ Do not obstruct the flow of combustion and ventilation air.
Keep the ventilation openings of the cylinder enclosure free
and clear from debris.
■ Open the cabinet door and inspect the gas cylinder supply
hose before each use of the outdoor cooking gas
appliance. If the hose shows excessive abrasion or wear,
or is cut, it MUST be replaced before using the outdoor
cooking gas appliance. Contact your dealer and use only
replacement hoses specified for use with the outdoor
cooking gas appliance.
■ Visually check the burner flames.
They should be blue. Slight
yellow tipping is normal for LP
gas. The flames should be
approximately 1" (2.5 cm) high.
■ Check and clean burner/venturi tube for insects and insect
nest. A clogged tube can lead to fire under the outdoor
cooking gas appliance.
■ The LP gas supply cylinder to be used must be:
- constructed and marked in accordance with the
Specification for LP Gas Cylinders of the U.S. Department
of Transportation (DOT) or the National Standard of
Canada, CAN/CSA-B339, Cylinders, Spheres, and Tubes
for Transportation of Dangerous Goods; and Commission.
- provided with a listed overfilling prevention device.
- provided with a cylinder connection device compatible
with the connection for outdoor cooking gas appliances.
■ Always check connections for leaks each time you connect
and disconnect the LP gas supply cylinder. See
“Installation Instructions” section.
■ When the outdoor cooking gas appliance is not in use, the
gas must be turned off at the supply cylinder.
■ Storage of an outdoor cooking gas appliance indoors is
permissible only if the cylinder is disconnected and
removed from the outdoor cooking gas appliance.
■ Cylinders must be stored outdoors and out of the reach of
children and must not be stored in a building, garage, or
any other enclosed area.
■ The pressure regulator and hose assembly supplied with
the outdoor cooking gas appliance must be used. A
replacement pressure regulator and hose assembly
specific to your model is available from your outdoor
cooking gas appliance dealer.
■ Gas cylinder must include a collar to protect the cylinder
valve.
■ For appliances designed to use a CGA791 Connection:
Place a dust cap on cylinder valve outlet whenever the
cylinder is not in use. Only install the type of dust cap on
the cylinder valve outlet that is provided with the cylinder
valve. Other types of caps or plugs may result in leakage
of propane.
If the following information is not followed exactly, a fire
causing death or serious injury may occur.
■ Do not store a spare LP gas cylinder under or near this
outdoor cooking gas appliance.
■ Never fill the cylinder beyond 80 percent full.
1"
(2.5 cm)

“AA” Battery (1)
5
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Parts Supplied
■Gas pressure regulator/hose assembly set for 11" WCP LP
gas
■Right side shelf with side burner
■Left side shelf
■Side burner control knob
■
■Warming rack
■Cooking grid
■Side burner cooking grid
Parts Needed
■20 lb LP gas fuel tank - approximately 18" (45.7 cm) height
Parts Needed for Conversion to Natural Gas
■Natural gas conversion kit Part Number 710-0003. See
“Assistance” section to order. The conversion kit includes:
■Natural gas regulator 4" W.C. (marked “Natural Gas
Regulator”)
■10 ft (3.0 m) Natural gas hose with quick connector
■5.9" (150 mm) Natural gas regulator hose
■6 mm nut driver
■6 mm wrench
■Hex key
■Gas line shutoff valve
■½" male pipe thread nipple for connection to pressure
regulator.
■LP gas-resistant pipe-joint compound
■CSA design-certified outdoor flexible stainless steel
appliance connector (4-5 ft [1.2-1.5 m]) or rigid gas supply
line as needed.
Location Requirements
Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft
areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for freestanding outdoor
grills:
■A minimum of 24" (61 cm) must be maintained between the
front of the grill hood, sides and back of the grill and any
combustible construction.
■A 24" (61 cm) minimum clearance must also be maintained
below the cooking surface, and the grill shall not be used
under overhead combustible construction.
Rotisserie (accessory)*
If you equip your grill with a rotisserie, a 6" (15.2 cm) minimum
clearance is needed for the rotisserie motor.
A grounded, 3-prong outlet located to the left of the grill is
required.
*See “Assistance” section to order.
■Phillips screwdriver
■Wrench or pliers
■Pipe wrench
■Scissors or cutting pliers 
(to remove tiedowns)
■Noncorrosive leak-
detection solution
WARNING
Explosion Hazard
Do not store fuel tank in a garage or indoors.
Do not store grill with fuel tank in a garage or indoors.
Failure to follow these instructions can result in death,
explosion, or fire.
WARNING
Fire Hazard
Do not use grill near combustible materials.
Do not store combustible materials near grill.
Doing so can result in death or fire.

6
Product Dimensions
12 5/8"
(32cm)
12 5/8"
(32cm)
48 5/8"
(123.5cm)
23"
(58.42cm)
31"
(78.74cm)
55"
(1405cm)

7
Gas Supply Requirements
Observe all governing codes and ordinances.
IMPORTANT: This installation must conform with all local codes
and ordinances. In the absence of local codes, installation must
conform with either the National Fuel Gas Code, ANSI Z223.1/
NFPA 54, Natural Gas and Propane Installation Code, CSA
B149.1, Propane Storage and Handling Code, B149.2, or the
Standard for Recreational Vehicles, ANSI A119.2/NFPA 1192 and
CSA Z240 RV Series Recreational Vehicle Code as applicable.
IMPORTANT: Grill must be connected to a regulated gas supply.
Refer to the model/serial rating plate for information on the type
of gas that can be used. If this information does not agree with
the type of gas available, check with your local gas supplier.
Gas Conversion:
No attempt shall be made to convert the grill from the gas
specified on the model/serial rating plate for use with a different
gas type without consulting the serving gas supplier. The
conversion kit supplied with grill must be used. See “Gas
Conversions” section for instructions.
Gas Pressure Regulator
The gas pressure regulator supplied with this grill must be used.
The inlet (supply) pressure to the regulator should be as follows
for proper operation:
LP Gas:
Operating pressure: 11" (27.9 cm) WCP
Inlet (supply) pressure: 11" to 14" (27.9 cm to 35.5 cm) WCP
Natural Gas:
Operating pressure: 4" (10.2 cm) WCP
Inlet (supply) pressure: 7" to 14" (17.8 cm to 35.5 cm) WCP
maximum.
Contact local gas supplier if you are not sure about the inlet
(supply) pressure.
Burner Requirements for High Altitude
Input ratings shown on the model/serial rating plate are for
elevations up to 2,000 ft (609.6 m).
For elevations above 2,000 ft (609.6 m), ratings are reduced at a
rate of 4% for each 1,000 ft (304.8 m) above sea level. Orifice
conversion is required. See “Assistance” section to order.
Gas Supply Line Pressure Testing
Testing above ½ psi (3.5 kPa) or 14" (35.5 cm) WCP (gauge):
The grill and its individual shutoff valve must be disconnected
from the gas supply piping system during any pressure testing of
that system at test pressures greater than ½ psi (3.5 kPa).
Testing below ½ psi (3.5 kPa) or 14" (35.5 cm) WCP (gauge) or
lower:
The grill must be isolated from the gas supply piping system by
closing its individual manual shutoff valve during any pressure
testing of the gas supply piping system at test pressures equal to
or less than ½ psi (3.5 kPa).
Gas Connection Requirements
20 lb LP Gas Fuel Tank
This grill is equipped for use with a 20 lb LP gas fuel tank (fuel
tank not supplied). A gas pressure regulator/hose assembly is
supplied.
Any brand of 20 lb LP gas fuel tank is acceptable for use with the
grill, provided that it is compatible with the grill’s retention means
(tank tray included).
It is also design-certified by CSA International for local LP gas
supply or for Natural gas with appropriate conversion.
The 20 lb LP gas fuel tank must be mounted and secured.
Door Style Tank Tray
1. Open cabinet doors.
2. Slide the tank tray locking bracket counterclockwise 90° and
pull out the tray.
WARNING
Explosion Hazard
Use a new CSA International approved “outdoor”
gas supply line.
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure
gas pressure does not exceed 14” water
column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and
authorized service personnel.
Failure to do so can result in death, explosion, or fire.
A. Gas pressure regulator/hose assembly
A. Tank tray locking bracket
A
A
Install a shut-off valve.
(36cm)

8
3. Place the 20 lb LP gas fuel tank bottom collar into the
mounting hole in the tank tray.
4. Tighten the locking screw against the bottom collar of the 
20 lb LP gas fuel tank to secure.
5. Slide the drawer with the 20 lb LP gas fuel tank back into the
cabinet. Turn the tank tray locking bracket clockwise 90° to
tighten.
Natural Gas Conversion
Conversion must be made by a qualified gas technician. The
qualified Natural gas technician shall provide the Natural gas
supply to the selected grill location in accordance with the
National Fuel Gas Code ANSI Z223.1/NFPA 54 - latest edition,
and local codes. For conversion to Natural gas, the Natural Gas
Conversion Kit supplied with the grill (on some models) or the
Natural Gas Conversion Kit Part Number 710-0003 must be
used. See “Assistance” section for information on ordering.
IMPORTANT: The gas installation must conform with local
codes, or in the absence of local codes, with the National Fuel
Gas Code, ANSI Z223.1/NFPA 54 - latest edition.
Follow instructions for converting to Natural gas in the “Gas
Conversions” section of this manual or the instructions supplied
with Natural Gas Conversion Kit Part Number 710-0003.
The gas supply line shall be equipped with an approved shutoff
valve. This valve should be located in the same area as the grill
and should be in a location that allows ease of opening and
closing. Do not block access to the shutoff valve. The valve is for
turning on or shutting off gas to the grill.
A. Locking screw
B. Bottom collar
C. Mounting hole
A. Tank tray locking bracket
AC
B
A
A. Gas supply line
B. Shutoff valve “open” position
C. To grill
A
B
C

64
72
71
65
62
60
31
26
24
28
19
16
17
18
27
21
25
22
23
29
20
32
30
31
45
43
41
42
50
57
57
59
48
70
40
39
38
38
49
04
03
53
53
53
53
34
35
05
07
56
51
52
54
69
67 68
66
64
58
36
36
33
36
55
63
36 47
44
43
46
13
14
15
12
02
09
37
11
06
01
02
10
76b
76a
76c
76e
76f
76g
76d
76
75
75a
74
73
61
REPLACEMENT PARTS
9

10
Part
Number Part (description) Warranty 
Coverage Quantity
01 Main lid 3 1
02 Main lid screw 1 2
03 Temperature gauge
housing 1 1
04 Temperature gauge 1 1
05
Logo
1 1
06
Main lid handle seat, left
1 1
07 Main lid handle seat, right 1 1
08
Main lid handle tube
09
Main lid bracket, left
1 1
10
Main lid bracket, right 1 1
11
12
Front baffle 1 1
13
Igniter junction wire 1 1
14
Main gas valve 14
15
Main control panel 31
16
1 5
17
1 4
18
19 Regulator, LP
1 1
20
Side burner gas valve
1 1
21
Side manifold
11
22
Side burner flex gas line A
11
23
1 1
24
Main manifold
1 1
25
1 2
26
27
28
1 1
29
Control knob
1 1
30
Bezel
1 4
31
32
33 Cart frame, front
34 Door magnet
35
36
Side shelf, left 11
37
Side shelf front panel, left 3 1
38
Rubber grommet 1 1
39
Side panel, left 1 1
Door hinge bracket 1 4
Swivel caster with brake 1 1
Swivel caster 1 1
Caster 1 2
Bottom panel 1 1
45
Tank tray 1 1
46 Gas tank tray slide
bracket, left 1 1
47
Gas tank tray slide
bracket, right 1 1
48
49
50
51
52
Grease box
53
54
Flame tamer 3 4
55
Door handle assembly 1 2
56
Door, left 3 1
57
Door, right 3 1
58
59
60
Electric igniter module 1 1
61
Side panel, right 1 1
62
63
64
Back panel 1 1
65
66
Side burner control panel,
right 3 1
Side burner bowl assembly 1 1
Side burner cooking grid 1 1
Side burner lid 1 1
Side burner lid hinge rod 1 2
Main burner igniter wire A 1 1
Main burner igniter wire B 1 1
Part
Number Part (description Warranty  Coverage Quantity
Side burner orifice bracket
Warming rack
Door hinge
Side burner 1 1
1 4
Main burner igniter wire C 1 1
Main burner igniter wire D 1 1
Main burner 10 4
Cooking grid with hole B 3 2
Cooking grid with hole A 3 1
1 1
Side burner flex gas line B 1 1
1 1
Side burner igniter 1 1
Hook 1 6
Side burner end cap 1 1
67
68
69
70
71
Burner pin assembly 1 2
Side shelf end cap 1 1
NG Conversion kit
72
Sold separately
as set with #76
76a
76b
76c
76d
76e
76f
with Lock
Quick Connector
assembly for NG unit 1
1
2
1
1
1
NG Gas Hose with
6 mm Nut Driver
Hex Wrench
6mm Wrench
Phillips Head Screw
Flat Washer
NG Regulator assembly
2
for NG unit
Sold separately
as set with #76
Sold separately
as set with #76
Sold separately
as set with #76
Sold separately
as set with #76
Sold separately
as set with #76
Sold separately
as set with #76
Sold separately
as set with #76
1
76g
40
41
42
43
44
Gas tank tray slide 1 2
Tank tray bolt 1 1
Gas tank tray block piece 1 1
Lighting rod 1 1
Lighting rod cover 1 1
Preassembly hardware pack
Manual 11
77
78
11
Main burner bowl assembly Non-
replaceable 1Burner pin assembly
73
74
Eye bolt
Tank heat shield panel 1 1
75a
76
Side burner NG orifice pack
1 1
11
75
Side burner NG orifice
1 1
79 PVC cover 11

11
All Pre-Assembled Screws List
Sort Description Size Quantity
1¹⁄₄ Screw ¹⁄₄*12mm 10
2⁵⁄₃₂ Screw ⁵⁄₃₂*10mm 2
3M4 Screw M4*10mm 2
4 2
⁵⁄₃₂ Flat washer
1234

12
Package Content List
Side Burner Assembly Side Shelf Assembly
Control Knob
Warming Rack
Grease Box

13
INSTALLATION INSTRUCTIONS
Freestanding Outdoor Grill Installation
Unpack Grill
1. Remove all packaging materials and remove grill from the
shipping base.
2. Move grill close to desired outdoor location.
3. Open the grill hood.
Remove Packaging Material Inside the Grill
1. Use a utility knife to cut yellow straps and packing tape to
open box from top and remove the boxes.
2. Remove the warming shelf and grill grates from inside the grill
and remove the package inside the firebox.
3. Remove foam block and wrap from inside the grill.
Attach Right Side Shelf with Side Burner
1. Unpack right side shelf with side burner.
2. Open grill lid.
3. Remove 3 screws from the side of the side burner.
4. Remove 2 screws on grill side panel and 1 screw on grill
control panel.
5.
6.
Attach the top of the side shelf to the grill (A) by inserting the
2 screws removed in Step 3 into the side shelf from inside the
grill hood and tighten. See illustration in Step 7.
Attach the bottom of the side shelf to the side panel (B)
of the grill by inserting the 2 screws removed from the grill
side panel in Step 4. Tighten the screws. See illustration
in Step 7.
A. Side burner screws
Excessive Weight Hazard
Use two or more people to move and install grill.
WARNING
Failure to do so can result in back or other injury.
A
A. Grill control panel screw
B. Grill side panel screws
A
B
7. Attach the side shelf to the control panel (C) by inserting the
screw removed from the grill control panel in Step 4. Tighten
the screw.
B

14
8. Remove the 2 screws from the side burner valve assembly.
See illustration in Step 10.
Push the valve stem out through the opening in the front of
the side burner shelf, lining up the holes in the side burner
valve assembly with the openings on the side burner shelf.
See illustration in Step 10.
10. Slide the bezel opening over the valve stem and attach the
side burner valve assembly and bezel to the side burner shelf
with the screws removed in Step 8.
12. Connect electrical plugs on underside of side burner.
A. Bezel
B. Valve
A. Electrical plug from grill
B. Electrical plug from side burner
A
B
9.
11. Attach side burner orifice bracket with side burner tube
with preassembled brass screw, then tighten by wrench.
A. Side burner orifice bracket.
B. Side burner tube
A
B
A
B

15
13. Insert the valve stem into the knob and push knob into place.
14. The igniter battery is not factory installed. A “AA” size alkaline
battery is located in the accessory box on the grill grate.
Install battery at this time following the instructions in
“Replacing the Igniter Battery” section.
Attach Left Side Shelf
1. Unpack left side shelf.
2. Open grill lid.
3. Remove 3 screws from the side of the side shelf.
4. Remove 2 screws on grill side panel and 1 screw
on grill control panel.
5. Attach the top of the side shelf to the grill (B) by inserting the
2 screws removed in Step 3 into the side shelf from inside the
grill hood and tighten. See illustration in Step 7.
6. Attach the bottom of the side shelf to the side panel (A)
of the grill by inserting the 2 screws removed from the grill
side panel in Step 4. Tighten these screws.
See illustration in Step 7.
7. Attach the side shelf to the control panel (C) by inserting the
screw removed from the grill control panel in Step 4. Tighten
the screw.
A. Side shelf screws
A. Grill side panel screws
B. Grill control panel screw
A
B
A
B
A
C

16
Complete Assembly
1. Replace the grill grates.
2. Place warming shelf on brackets as shown..
Make Gas Connection
NOTE: If grill is to be converted to Natural gas, follow instructions
in the “Gas Conversions” section.
20 lb LP Gas Fuel Tank
LP Gas:
IMPORTANT: A 20 lb LP gas fuel tank must be purchased
separately.
IMPORTANT: The gas pressure regulator/hose assembly
supplied with the grill must be used. Replacement gas pressure
regulator/hose assembly specific to your model, is available from
your outdoor grill dealer.
Door Style Tank Tray
1. Open cabinet doors.
2. Slide the tank tray locking bracket counterclockwise 90° and
pull out the tray.
A. Warming shelf brackets
B. Warming shelf
B
A
A. Tank tray locking bracket
WARNING
Explosion Hazard
Securely tighten all gas connections.
If connected to LP, have a qualified person make sure
gas pressure does not exceed 14” (36 cm) water
column.
Examples of a qualified person include:
licensed heating personnel,
authorized gas company personnel, and
authorized service personnel.
Failure to do so can result in death, explosion, or fire.
A
Cover your grill
Once your grill has cooled down, cover the grill between
uses. See below picture.

17
3. Place the 20 lb LP gas fuel tank bottom collar into the
mounting hole in the tank tray.
4. Tighten the locking screw against the bottom collar of the
20 lb LP gas fuel tank to secure.
5. Slide the tank tray with the 20 lb LP gas fuel tank back into
the cabinet and lock the locking bracket.
To Connect the 20 lb LP Gas Fuel Tank:
1. Check that the 20 lb LP gas fuel tank is in the “Off” position. If
not, turn the valve clockwise until it stops.
2. Check that the 20 lb LP gas fuel tank valve has the proper
type-1 external male thread connections per ANSI Z21.81.
3. Check that the burner control knobs are in the “Off” position.
4. Remove any debris and inspect the valve connections, port,
and gas pressure regulator/hose assembly for damage.
NOTE: Always keep the LP cylinder at 90° (upright)
orientation to avoid vapor withdrawal.
5. Using your hand, turn the gas pressure regulator/hose
assembly clockwise to connect to the 20 lb LP gas fuel tank
as shown.
Hand tighten only. Use of a wrench could damage the quick
coupling nut.
Make sure that the cylinder valve connection device properly
mates with the connection device attached to the inlet of the
pressure regulator.
6. Open the tank valve fully by turning the valve
counterclockwise. Wait a few minutes for gas to move
through the gas line.
7. Before lighting the grill, test all connections by brushing on an
approved noncorrosive leak-detection solution. Bubbles will
show a leak.
8. If a leak is found, turn the tank valve off and do not use the
grill. Contact a qualified gas technician to make repairs.
9. Go to “Check and Adjust the Burners” section.
A. Locking screw
B. Bottom collar
C. Mounting hole
AC
B
A. Gas pressure regulator/hose assembly
B. 20 lb LP gas fuel tank
A
B

18
To Disconnect the 20 lb LP Gas Fuel Tank:
1. Check that the burner control knobs are in the “Off” position
and the grill is cool.
2. Check that the 20 lb LP gas fuel tank is in the “Off” position. If
not, turn the valve clockwise until it stops.
3. Using your hand, turn the gas pressure regulator/hose
assembly counterclockwise to disconnect to the 20 lb LP gas
fuel tank as shown.
Hand loosen only. Use of a wrench could damage the quick
coupling nut.
4. Place dust cap on cylinder valve outlet whenever the cylinder
is not in use. Only install the type of dust cap on the cylinder
valve outlet that is provided with the cylinder valve. Other
types of caps or plugs may result in leakage of propane.
A. Gas pressure regulator/hose assembly
B. 20 lb LP gas fuel tank
A
B

19
GAS CONVERSIONS
Tools and Parts for Gas Conversion
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Parts supplied
■Natural gas orifices
Parts needed
■Natural gas conversion kit Part Number 710-0003. See
“Assistance” section to order. The conversion kit includes:
■Natural gas regulator 4" W.C. (marked “Natural Gas
Regulator”)
■10 ft (3.0 m) Natural gas hose with quick connector
■5.9" (150 mm) Natural gas regulator hose
■6 mm nut driver
■6 mm wrench
■Hex key
IMPORTANT: Gas conversions must be done by a qualified
installer. Before proceeding with conversion, shut off the gas
supply to the appliance prior to disconnecting the electrical
power.
Conversion from LP Gas to Natural Gas
Installation of the regulator
1. Turn off the main gas supply valve.
2. Disconnect 20 lb LP gas fuel tank (if present).
3. Turn off all burner control valves.
4. Remove the 20 lb LP gas fuel tank (if present) from the grill
cart.
5. Use an adjustable wrench to remove the LP regulator from
the manifold.
6. Use an adjustable wrench to install the Natural gas regulator
hose to the manifold and secure. Attach the Natural gas
regulator to the side panel inside the grill cart with the two
screws that are preassembled on the regulator.
Make Gas Connection
1. A combination of pipe fittings must be used to connect the
grill to the existing gas line.
■The 10 ft (3.0 m) PVC flexible gas supply hose design-
certified by CSA must be used.
■Pipe-joint compounds suitable for use with Natural gas
must be used. Do not use Teflon®† tape.
■There must be a certified manual shut-off valve in the gas
supply line near the grill for easy access.
2. Connect the brass connector on one end of the 10 ft (3.0 m)
PVC flexible gas supply hose to the Natural gas pressure
regulator.
■Phillips screwdriver
■Pipe wrench
■Adjustable wrench
■6 mm socket and wrench
or 6 mm nut driver
■Thin flat-blade screwdriver
■Pliers
■Pipe thread sealant
certified for LP gas
WARNING
Explosion Hazard
Use a new CSA International approved “outdoor”
gas supply line.
Securely tighten all gas connections.
Failure to do so can result in death, explosion, or fire.
†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.
Install a shut-off valve.

20
3. Connect the quick connector on the other end of the
10 ft (3.0 m) PVC flexible gas supply hose to the rigid Natural
gas supply pipe.
Change Grill Burner Valve Orifices
1. Remove the grates and flame tamers.
2. Remove the 1 screw and cotter clip that hold the burner in
place. Set the screw and clip aside. Remove the burner from
the grill by lifting the burner out.
3. Use a 6 mm socket and wrench or 6 mm nut driver to remove
the brass orifice from the end of gas valve. The main burner
orifice is located behind the LP orifice, so no additional orifice
needs to be installed.
IMPORTANT: Check that the orifice is properly installed
inside of the burner opening.
4. Reinsert the burner and reattach using the 2 screws
previously removed. Repeat the procedure for each main
burner.
5. Position the igniters so they are ¼" (6.0 mm) away from each
burner.
A. Left side panel
B. Manifold
C. 10 ft. (3.0 m) PVC gas hose
D. Natural gas pressure regulator/hose assembly
A. Screw
B. Cotter clip
A
B
C
D
A. Main burner orifice
A
A
B