KitchPRO Ice Shaver Deluxe User manual

1/ 6
Ice Shaver Deluxe
Specifications
Item
Electric Ice Shaver
Power Supply
AC220-240V
Frequency
50Hz
Rated Power
45W
KB Time
5 Min
Safety instruction
Before using the appliance, please read this ”safety instruction” carefully
Please be sure to comply with the record on safety precautions.
Please keep this instructional manual after the first using.
Appliances can be used by persons with reduced physical, sensitive or mental capabilities or lack
of experience and knowledge if they have been given supervision or instruction concerning use
of the appliance in a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
Switch off the appliance and disconnect from supply before changing accessories or approaching
parts that move in use.
Always disconnect the appliance form the supply if it is left unattended and before assembling,
disassembling, or cleaning.

2/ 6
This appliance shall not be used by children. Keep the appliance and its cord out of reach of
children.
Misuse this appliance may lead to potential injury
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Care shall be taken when handling the sharp nail, emptying the bowl and during cleaning.
Description

3/ 6
1
Shaft- adjusting screw
10
Ice-pusher shaft
2
Ice-pusher knob
11
Blade adjuster
3
Spinning shaft
12
Main unit
4
Ice-pusher
13
Power switch
5
Pointed screw
14
Base
6
Heater
15
Plate
7
Ice shaving chamber
16
Locking switch
8
Aluminum base
17
Power cord
9
Blade
18
Plug
BEFORE USE
Please follow the steps below before
using for the first time.
1. Please clean all the attachments
except the main unit. Thoroughly
rinse it with clean water and dry.
2. Fix the main unit on the base and
the ice-pusher plate on the shaft.
HOW TO MAKE ICE
1. Clean the Ice-making box thoroughly.
2. Fill the box with water and maintain a water level 80%. Cover the box
with the lid and put the box in the refrigerator for freezing.
USE
1. Place the appliance on a horizontal and flat place
2. Take the ice making box from the refrigerator and remove the lid.
Place the ice box on a plate and have it defrost naturally for 10
minutes.

4/ 6
3. How to take out the ice-shaving chamber.
Rotate the knob and make sure the ice pusher plate rise to the
top.
Turn the locking switch to “unlock” and take the ice-shaving
chamber out.
4. Place the ice into the ice-shaving chamber.
5. Install the ice shaving chamber with ice cubes on the main unit.
Please note that when the ice-pusher plate is descending and
the locking knob is locked, the chamber cannot be installed.
6. Make sure the left and right part of the ice shaving chamber
reaches the bottom. As shown in the figure below:
7. Switch on the power
8. Place the container on the tray.
9. Inversely rotate the ice-pusher knob to lower the plate to the ice cube
position

5/ 6
10. Adjust the blade-height-adjustment screw to the “FINE”
position.
11. Press the power switch and the machine starts to work.
Note: 1) Do not work continuously for more than 10 minutes, or it may cause
motor failure.
2) Rotate the container while shaving ice
12. Press the power switch to adjust the height of the blade
1) Counter clockwise rotation for “Fine” shape; rotate clockwise for
“coarse” shape
2）Do not shave the ice containing alcohol.
13. Remove the chamber from the main unit and clean up the remaining
ice.
*When the ice sticks to the chamber, take out the chamber and push the
shaft to remove the remaining ice.
14. Pull out the power plug.

6/ 6
Pack and storage
1. Remove the chamber and the ice-pusher plate from the main unit respectively.
1) Only when the lock knob is unlocked, the chamber can be removed.
2) Be caution of the pointed screw. Turn the ice-pusher plate clockwise and remove it.
2. Dry the main unit with a dry cloth.
3. Wash the ice-pusher plate, base, chamber and ice-maker box
4. Dry thoroughly after washing.
5. Assemble it into the pre-use state.
Blade storage
1. Rinse the blade and dry.
2. When the blade is dry, apply cooking oil to it.