KJB Security SH1300 User manual

Cloud IP Camera
Quick Installation Guide
a.Scan 'VSmaHome' APP QR code.
b. Download 'VSmaHome' APP from APP Store(iOS ) or Play Store(Android).
Note: PC users please download our APP: www.vsmahome.com/download.
1.Install VSmaHome APP
2.Add camera to account
a. Plug in device, open the APP, register an account, and log in.
b. Click on '+' in top left corner, select the device model, scan the QR code
and add the device ID, and enter the network connection interface.
Note: Due to the continuous updating of the product and software,
there may be a discrepancy between the operating guide and the APP
interface.All the instructions are subject to the actual operation interface.
V1.1

Click the WiFi connection icon and press the RESET button to enter the WiFi
configuration mode.Input the WiFi password, the connection should be
successful!
Click on the Ethernet connection icon, connect the network cable, change
the password, and set W iFi.
a. Wi-Fi connection
b. Ethernet connection
3. Select network connection
Not e: ① Press RESET key, hold for 1-2 seconds to enter the WiFi configuration, long press
10-12seconds to restore the factory settings.
② If the WiFi configuration fails, try an ethernet connection.
When the SD card is inserted into the camera, it is required to manually set up
the Settings to open the recording function.
Step 1: View the video Step 2: Enter the Settings screen
Step 3: Select Schedule Recording Step 4: Select video recording mode
a. Adapter shall be installed near the equipment and shall be easily accessible.
b. For best results, operating temperature: -10 - 50° C
c. The adaptor is used as the power switch.
d. The power adapter must be included by the device vendor.
e. The device complies with RF specifications when the device is used 0.5 cm
from your body.
f. Operating Frequency Range: 2.400GHz-2.4835GHz; Max Output
Power: 16dBm.
4. SD card video recording setup
CAUTION