WARNING!FAILURE TO FOLLOW EACH OF THE FOLLOWING
ASSEMBLY INSTRUCTIONS PRECISELY MAY RESULT IN DAMAGE
TO THE PRODUCT AND / OR INJURY TO THE CONSUMER.
1. REMOVE ALL PARTS FROM CARTON AND SEPARATE THEM INTO PART NUMBER
GROUPS AS INDICATED ON THE PART LIST. WHEN ORDERING ADDITIONAL
PARTS, INDICATE MANUFACTURER REPLACEMENT PART NUMBER (MRP#) AS
WELL AS PART NAME.
2. PLACE THE TABLE TOP (2) ON ITS BACK ON A SMOOTH, FLAT SURFACE. LOOSELY
ATTACH THE TABLE LEGS (3) TO THE TABLE TOP (2). DO NOT FULLY TIGHTEN THE
TABLE LEGS (3). FOLLOWING STEP 1.
3. ATTACH THE SIDE STRETCHERS (5) AND BACK STRETCHER (6) TO THE TABLE LEGS (3),
SECURE WITH BIG SCREWS (A) USING PHILIPS HEAD SCREWDRIVER (NOT PROVIDED).
CONTINUE TO FULLY TIGHTEN THE BUN FEET (4) TO THE SIDE STRETCHERS (5) AND
THE BACK STRETCHER (6). FULLY TIGHTEN THE TABLE LEGS (3) NOW. FOLLOWING
STEP 2.
4. INSERT SHELF PINS (B) INTO DESIRED LOCATIONS BEHIND THE DOORS. LAY THE
SHELVES (10) ON THE SHELF PINS AND SECURE USING SMALL SCREWS (C) AND
PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED).
I
ASSEMBLY IS NOW COMPLETE.
THANKS FOR YOUR PURCHASE!
