WARNING!FAILURE TO FOLLOW EACH OF THE FOLLOWING
ASSEMBLY INSTRUCTIONS PRECISELY MAY RESULT IN DAMAGE
TO THE PRODUCT AND / OR INJURY TO THE CONSUMER.
1. REMOVE ALL PARTS FROM CARTON AND SEPARATE THEM INTO PART NUMBER
GROUPS AS INDICATED ON THE PART LIST. WHEN ORDERING ADDITIONAL
PARTS, INDICATE MANUFACTURER REPLACEMENT PART NUMBER (MRP#) AS
WELL AS PART NAME.
2. PLACE CHAIR BACK (2) ON A SMOOTH, FLAT SURFACE WITH HOLES FACING UP.
3. ATTACH SEAT FRAME (3) TO CHAIR BACK (2). INSERT FLAT WASHERS (B), SPRING
WASHERS (C), BOLTS (A), USING ALLEN KEY (H) TO SECURE. DO NOT FULLY TIGHTEN
YET.
4. ATTACH LEFT FRONT LEG (4) AND RIGHT FRONT LEG (5) TO SEAT FRAME (3) AND
SECURE WITH FLAT WASHERS (B), SPRING WASHERS (C), BOLTS (A), USING ALLEN KEY
(H) TO SECURE. ATTACH THE LEFT ARM (6) AND RIGHT ARM (7) TO THE SEAT FRAME
(3 ), SECURE WITH FLAT WASHERS (E), SPRING WASHERS (F), BOLTS (D) AND ALLEN
KEY (H).DO NOT FULLY TIGHTEN YET. ATTACH THE LEFT ARM (6) AND RIGHT ARM (7) TO
THE CHAIR BACK (2), SECURE WITH SCREWS (G) USING PHILIPS HEAD SCREWDRIVER
(NOT PROVIDED)
5. SET THE CHAIR UPRIGHT. LEVEL THE CHAIR AND FULLY TIGHTEN ALL BOLTS AT THIS
TIME.
ASSEMBLY IS NOW COMPLETE.
THANKS FOR YOUR PURCHASE!
790/791-905
JASPER COUNTY ARM CHAIR
