Klipsch CP-4 User manual

SPECIFICATIONS CP-4
Frequency Response180Hz-22kHz +3/-6 dB
Power Handling250 w (200 peak)
Maximum Continuous Output3105dB
Sensitivity491 dB @ 1 watt/1 meter
Nominal Impendance 8 ohms
Tweeter .75" (1.9cm) aluminum dome tweeter
High Frequency Horn 90° x 90° Tractrix® Horn
Woofer 3.5" (8.9cm) long-throw IMG woofer
Crossover Frequency 3.2kHz 12dB octave
Enclosure Type Bass-reflex via dual front-firing ports
Enclosure Material Anti-resonant, mineral-filled PPC;
paintable, weather resistant
Grille Powder-coated aluminum w/rotatable logo
Terminals Front baffle mounted accessed via rear pull-through
Speaker Weight 4.8 lbs. (2.2kg)
Speaker Dimensions 8.8"(22.4cm) H x 5.5"(14.0cm) W x 4.7"(11.9cm) D
Speaker Dimension
w/ Wall Mount 8.8"(22.4cm) H x 5.5"(14.0cm) W x 5.5"(14.0cm) D
Other Mounting Options 1/4", 20-thread insert on cabinet rear
Finishes White/Black enclosure and grille
Wire Gauge Accommodated Up to 16AWG
Sold As Speaker pairs
Included in Carton
Speakers (x2), Grilles (x2), Brackets (x2), Manual,
Mounting Template, Bracket Retaining Screws (x4),
Safety Instructions, Grille Removal Tool
Carton Dimensions 12.6"(320mm) H x 17.3"(440mm) W x 9"(230mm) D
Total Carton Weight 10.14 lbs.(4.6kg)
Item Number 1060305 (white), 1016295 (black)
UPC 743878027013 (white), 743878025965 (black)
Built From 2014
COMPACT, HIGH PERFORMANCE
INDOOR/OUTDOOR LOUDSPEAKER
The Klipsch Compact Performance CP-4 mountable cabinet speaker,
with its weather-resistant design, is as much at home on the patio as
it is placed on a shelf or mounted on the wall indoors. The proprietary
90° x 90° Tractrix® Horn provides for unmatched low-distortion clarity
and detail while the long-throw woofer combines with front-firing
ports for amazingly powerful low frequency response wherever they
are located. Traditional Klipsch efficiency provides maximum output
with minimum wattage.
QUICK, EASY INSTALLATION
The CP-4 makes a highly aesthetic statement with its smaller size
and ability to mount closer to a wall or even be tucked into a
corner with its V-shaped rear profile. Tool-free angle adjustment
makes positioning a breeze. The unique, solid mounting bracket
assures a fast, easy, one-screwdriver installation. Front speaker wire
terminals combined with a pull-through wire channel provide a quick
connection with an uncluttered look. The CP-4 will also look great
placed on a shelf or stand without using the supplied bracket.
MULTIPURPOSE DESIGN
The Klipsch CP-4 can function as stereo mains or surrounds or be
mounted outdoors for warmer weather enjoyment with its solid,
mineral-filled cabinet and stainless steel hardware. Sold in pairs and
offered in Black or White with the ability to custom paint, the CP-4
complements any indoor or outdoor décor.
CP-4
1 3M anechoic
2 IEC 268-5 filtered pink noise with 6dB crest factor
3 Calculated at 1M at power handling power input
4 SPL at 1M, anechoic with 2.83V input
3502 Woodview Trace Indianapolis, IN 46268 | klipsch.com
All specifications are subject to change without notice.
©2014 Klipsch Group, Inc. Klipsch is a wholly-owned subsidiary of VOXX Intertnational Corporation

5.5”
(14.0cm)
8.8”
(22.4cm)
7.2”
(18.3cm)
5.5”
(14.0cm)
4.7 ”
(11.9cm)
TOOLS NEEDED FOR CP-4 INSTALLATION:
a) Level
b) One pencil
c) 1 Philips #2 screwdriver OR One Power Drill with A LOW TORQUE SETTING and a Philips #2
screwdriver bit
d) IF WALL MOUNTING: Four #10 or #12, 2.5-3” (4-5cm) Pan head Screws (Two for each speaker
bracket) for mounting into wall stud OR Four minimum 10 lb. (5kg) Wall Anchors if stud-
mounting is unavailable
SUGGESTIONS ON CONNECTING TWO PAIRS OF CP-4’S TO ONE AMPLIFIER/RECEIVER:
Klipsch CP-4 speakers are rated at 8 Ohms Nominal Impedance. If connection of TWO PAIRS to one amplifier or receiver is desired, the following connection
methods are recommended:
+
-
+
-
+
-+
-+
-
+
-
ONE PAIR TO
8ΩCAPABLE
AMP/RECEIVER
Right Channel Left Channel
+
-+
-+
-
+
-
PARALLEL WIRING TWO PAIRS TO
4ΩCAPABLE AMP/RECEIVER
Right Channels Left Channels
+
-
+
-+ -+
-+
-
+
-
SERIES WIRING TWO PAIRS TO
16ΩCAPABLE AMP/RECEIVER
Right Channels Left Channels
R
+
L
+
_
_
R
+
L
+
_
_
SPK A SPK B
Amp/Receiver Rear Amp/Receiver Front
SPK A SPK B
If your amp/receiver has separate connections for two
speaker pairs, connect the two pairs of CP-4’s to the two
speaker terminal sets. Depending on your amp/receiver,
either both pairs, or just one pair, will play at the same time.
+
-
+
-
+
-+
-+
-
+
-
ONE PAIR TO
8ΩCAPABLE
AMP/RECEIVER
Right Channel Left Channel
+
-+
-+
-
+
-
PARALLEL WIRING TWO PAIRS TO
4ΩCAPABLE AMP/RECEIVER
Right Channels Left Channels
+
-
+
-+ -+
-+
-
+
-
SERIES WIRING TWO PAIRS TO
16ΩCAPABLE AMP/RECEIVER
Right Channels Left Channels
R
+
L
+
_
_
R
+
L
+
_
_
SPK A SPK B
Amp/Receiver Rear Amp/Receiver Front
SPK A SPK B
If your amp/receiver does not have separate connections
for two speaker pairs, connect CP-4’s to the single set of
speaker terminals in parallel as shown. Your amp/receiver
must be rated to 4 Ohms to make this connection.
+
-
+
-
+
-+
-+
-
+
-
ONE PAIR TO
8ΩCAPABLE
AMP/RECEIVER
Right Channel Left Channel
+
-+
-+
-
+
-
PARALLEL WIRING TWO PAIRS TO
4ΩCAPABLE AMP/RECEIVER
Right Channels Left Channels
+
-
+
-+ -+
-+
-
+
-
SERIES WIRING TWO PAIRS TO
16ΩCAPABLE AMP/RECEIVER
Right Channels Left Channels
R
+
L
+
_
_
R
+
L
+
_
_
SPK A SPK B
Amp/Receiver Rear Amp/Receiver Front
SPK A SPK B
If your amp/receiver cannot drive a two-pair, 4 Ohm load
above, connect both pairs of CP-4’s to the single set of
speaker terminals in series as shown. This will lower the
volume sent to all speakers.
SUGGESTIONS ON PLACEMENT OF KLIPSCH CP-4 SPEAKERS:
X
XX
X
XX
X
XX
Mount Speakers horizontal
under roof eaves and point
down towards deck
House
Speakers disperse sound 90º
to cover whole deck evenly
STEREO ROOM PLACEMENT EXAMPLE
(aim speakers to main listening area)
AS SURROUND SPEAKERS ROOM PLACEMENT EXAMPLE
OUTDOORS TO COVER A DECK/PATIO WITH SOUND
(aim speakers down to main listening area)