Klipsch R-14M User manual

C
C
CO
O
ON
N
NS
S
SU
U
UM
M
ME
E
ER
R
R
KLIPSCH AUDIO TECHNOLOGIES
R-14M Monitor Speaker Service Manual
Table of Contents
SPECIFICATIONS.........................................................................................................................2
R-14MSPECIFICATIONS .................................................................................................................2
EXPLODED VIEW AND WARRANTY PARTS LIST..............................................................3
R-14MEXPLODED VIEW AND WARRANTY PARTS LIST .................................................................3
TROUBLESHOOTING GUIDELINES .......................................................................................4
TWEETER REMOVAL FOR R-14M...................................................................................................4
WOOFER REMOVAL FOR R-14M ..................................................................................................10
Product Type: R-14M Monitor Speaker
Manual Part #: 1061500
Model Line: Reference Premiere
Product Launch Year: 2014
The information contained in this document is solely intended for service and repair of Klipsch Group, Inc product;
use of this information to mimic or copy KGI designs is strictly prohibited and subject to prosecution.

Service Manual –Consumer
2
Specifications
Model: R-14M

Service Manual –Consumer
3
Part Number
1061673
1061674
1061675
1061676
1061677
1061678
R-14M Beauty Carton
R-14M Inner Pack
R-14M Woofer
R-14M Grill With Logo
R-14M Network W/ Input Cup
R-14M Horn With Tweeter
Warranty Replacement Parts
Parts Description
Exploded View and Warranty Parts List

Service Manual –Consumer
4
Tweeter Removal for R-14M
Tools needed:
#2 Philips Head Screwdriver
Small Flat Blade Screwdriver
First, remove the four (4) screws from the corners of the tweeter, highlighted in red

Service Manual –Consumer
5

Service Manual –Consumer
6
Once the screws are removed, the tweeter should come free and appear similar to the picture
below.

Service Manual –Consumer
7
Once the tweeter is removed from the cabinet, slide back the silicone covers on the terminals, and
use a small flat blade screw driver to release the wire clips holding to the positive and negative
terminals of the tweeter.

Service Manual –Consumer
8
Once the tweeter is removed, the speaker will look as shown below.

Service Manual –Consumer
9
Next, plug the wires on to the new tweeter, and slide
the silicone covers back over the terminals.
Place the tweeter back into position, and replace the
screws.

Service Manual –Consumer
10
Troubleshooting Guides
Woofer Removal for R-14M
Tools needed:
#2 Philips Head Screwdriver
Small Flat Blade Screwdriver
First, remove the four (4) screws from perimeter of the woofer, highlighted in red

Service Manual –Consumer
11

Service Manual –Consumer
12
Once the screws are removed, the woofer should come free and appear similar to the picture
below.

Service Manual –Consumer
13
Once the woofer is removed from the cabinet, slide back the silicone covers on the terminals, and
use a small flat blade screw driver to release the wire clips holding to the positive and negative
terminals of the woofer.

Service Manual –Consumer
14
Once all the screws have been removed, the woofer should come free as shown below.

Service Manual –Consumer
15
Next, plug the wires on to the new woofer, and slide
the silicone covers back over the terminals.
Place the woofer back into position, and replace the
screws.
Replace the trim ring by setting into position and gently
pressing the trim ring around the edge, verifying the
clips on the back are locking into place. Once this is
done, the trim ring should sit flush with the front of
the speaker