www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2008
In-Wall LCR Loudspeaker
KL-6502-THX
Frequency response 46Hz-20kHz +/-3dB
Power handling 100W continuous / 400W peak
Recommended amplifier power 150W
Sensitivity 92dB @ 2.83V / 1m
Nominal impedance 8 ohms compatible
High frequency drivers 1” (2.5cm) Titanium diaphragm
compression driver mated to
90° x 90° square Tractrix®Horn
High freq crossover 2100Hz & 1200Hz
Low frequency drivers Dual 5.25” (13.3cm) high-output,
fiberglass cone woofers
Enclosure material MDF & Aluminum motorboard /
ABS frame
Enclosure type Infinite baffle, front flush with wall
Dimensions 17.75” (45.1cm) H x 8” (20.3cm) W
Mounting depth 3.75” (9.5cm)
Cutout dimensions 16.5” (41.9cm) H x 6.5” (16.5cm) W
Installation kit IK-502-W (sold seperately)
Weight 9.6lbs (4.4kg)
Finishes White paintable frame and grille
SpecificationS
The KL-6502-THX delivers effortless
dynamic range and brings superior sound
to larger areas thanks to its highly regarded
THX Select2 certification.
It employs dual 5.25-inch woven fiberglass
woofers for amazingly accurate sound, as
well as a titanium tweeter mated to an
exclusive Tractrix® Horn for flat in-room
frequency response with high efficiency and
low distortion. The speaker’s precision-
voiced crossover networks further ensure
that the high and low frequencies are faith-
fully reproduced.
This in-wall speaker also consistently deliv-
ers thrilling, realistic sound, whether it’s
installed horizontally or vertically. It fea-
tures all-new sure-grip mounting dogs that
provide even pressure against drywall for
long-term installation reliability, and includes
a paintable grille that blends in perfectly with
any décor.
Furthermore, the KL-6502-THX offers
unlimited flexibility. It is timbre matched to
all of our THX-certified products, so you
can mix and match to create an unbeatable,
discreet stereo or home theater system
that’s just right for you.
• THX Select2-certied for superior sound
• Horn-loaded for high efciency and low distortion
• Easily mounts horizontally or vertically
• Maximum installation reliability
• Mix and match with our other THX products
