Klipsch Reference Premiere RP-260F User manual

C
C
CO
O
ON
N
NS
S
SU
U
UM
M
ME
E
ER
R
R
Product Type: RP-280F/RP-260F/RP-250F
Manual Part #: 1061797
Model Line: Reference
Product Launch Year: 2015
The information contained in this document is solely intended for service and repair of Klipsch Group, Inc product;
use of this information to mimic or copy KGI designs is strictly prohibited and subject to prosecution.
KLIPSCH AUDIO TECHNOLOGIES
Reference Premiere RP-280F/RP-260F/RP-250F Floorstanding
Speaker Service Manual
Table of Contents
SPECIFICATIONS.........................................................................................................................2
CUT SHEET DATA FOR RP-280F.....................................................................................................2
CUT SHEET DATA FOR RP-260F.....................................................................................................2
CUT SHEET DATA FOR RP-250F.....................................................................................................4
EXPLODED VIEW ........................................................................................................................5
WARRANTY PARTS LIST ..........................................................................................................6
TROUBLESHOOTING GUIDELINES .......................................................................................7
TWEETER REMOVAL.......................................................................................................................7
WOOFER REMOVAL......................................................................................................................15

Service Manual –Consumer
2
Specifications
Cut Sheet Data
Model: RP-280F

Service Manual –Consumer
3
Specifications
Cut Sheet Data
Model: RP-260F

Service Manual –Consumer
4
Specifications
Cut Sheet Data
Model: RP-250F

Service Manual –Consumer
5
Exploded View

Service Manual –Consumer
6
Part Number
1060814
1061147
1061107
1061087
1062493
1016198
1060814
1061254
1061108
1061086
1062493
1016198
1060814
1061255
1061023
1061085
1062493
1016198
RP-250F Grill
RP-250F Network Assy
Premiere Binding Post Shorting Straps (Pair)
Rubber Foot
RP-250F Warranty Replacement Parts
RP-260F Warranty Replacment Parts
RP-260F Network Assy
Premiere Binding Post Shorting Straps (Pair)
Rubber Foot
Rubber Foot
Reference Premiere Tweeter
RP-250F Woofer
Premiere Binding Post Shorting Straps (Pair)
Reference Premiere Floorstanding Speaker Warranty Replacement Parts
Parts Description
Reference Premiere Tweeter
RP-260F Woofer
RP-260F Grill
RP-280F Warranty Replacement Parts
Reference Premiere Tweeter
RP-280F Woofer
RP-280F Grill
RP-280F Network Assy
Warranty Parts List

Service Manual –Consumer
7
Tweeter Removal for RP-280F, RP-260F, and RP-250F
Tools needed:
3mm hex (Allen) key
Small Flat Blade Screwdriver
First, gently pry back the silicone tweeter horn lens with your finger-tips as illustrated below

Service Manual –Consumer
8

Service Manual –Consumer
9
Next, begin removing the screws from the perimeter of the tweeter, highlighted in red below.
There will be eight (8) total screws to remove, each using a 3mm hex key head.

Service Manual –Consumer
10

Service Manual –Consumer
11
Once all the screws have been removed, the tweeter and tweeter horn should come free as shown
below.
Once the tweeter is removed from the cabinet, slide back the silicone covers on the terminals, and
use a small flat blade screw driver to release the wire clips holding to the positive and negative
terminals of the tweeter.

Service Manual –Consumer
12
After the tweeter is removed completely from the cabinet, turn the tweeter over with the
magnet facing up.
Next, begin removing the screws attaching the tweeter to the tweeter horn lens
There will be four (4) screws total each using a #2 Philips head, highlighted in red below

Service Manual –Consumer
13

Service Manual –Consumer
14
Once the screws have been removed, the tweeter driver will come free as shown below.
Next, place the new tweeter on the horn lens and replace the four (4) screws.
Reattach the wire clips to the positive and negative terminals on the tweeter, and seat the tweeter
back into position.
Replace the eight (8) screws holding the tweeter in place inside the cabinet.
Finally, begin to reseat the silicone horn lens back into position, ensuring the silicone lens fits
snugly and sits flush against the speaker cabinet.

Service Manual –Consumer
15
Troubleshooting Guides
Woofer Removal for RP-280F, RP-260F and RP-250F
Tools needed:
3mm hex (Allen) key
Small Flat Blade Screwdriver
First, gently pry back the silicone trim ring with your finger-tips as illustrated on the next page

Service Manual –Consumer
16

Service Manual –Consumer
17
Once the trim ring is removed, begin removing the screws from the perimeter of the woofer.
There are six (6) screws in total, each using a 3mm hex key head, highlighted in red below.

Service Manual –Consumer
18

Service Manual –Consumer
19
Once the screws are removed, the woofer should come free as shown below.

Service Manual –Consumer
20
Next, slide back the silicone covers on the terminals, and use a small flat blade screw driver
to release the wire clips holding to the positive and negative terminals of the woofer