klover DEA ECO 12 User manual

STUFA A PELLET
DEA ECO 12
INSTALLAZIONE, USO E
MANUNTENZIONE, CONSIGLI UTILI
ITALIANO
FRANÇAIS
ENGLISH
ESPAÑOL
Cod.CS.IST.SE12
Rev.1.3
S.R.L.
Main Revision 1.3
FPH_supplement: 001

1
ENGLISH
GENERAL INDEX
INTRODUCTION..........................................................................................................................................................3
IMPORTANTSECURITYINSTRUCTIONS......................................................................................................................................3
AFEWPRECAUTIONS...........................................................................................................................................................3
INTENDEDUSE....................................................................................................................................................................3
INSTALLATIONREGULATIONS.................................................................................................................................................4
HEALTHANDSAFETY............................................................................................................................................................4
THEMACHINEANDTHEPELLETS................................................................................................................................5
STOVECOMPONENTS...........................................................................................................................................................5
CONNECTIONSDATASHEET...................................................................................................................................................6
TECHNICALFEATURES...........................................................................................................................................................7
PELLETFEATURES................................................................................................................................................................8
REQUIREMENTSOFTHEPLACEOFINSTALLATION......................................................................................................9
POSITIONING......................................................................................................................................................................9
SPACESAROUNDANDABOVETHESTOVE..................................................................................................................................9
EXTERNALAIRVENT.............................................................................................................................................................9
FLUEANDCONNECTIONTOTHELATTERSTACK......................................................................................................................10
ELECTRICALCONNECTION..........................................................................................................................................13
CLEANINGANDMAINTENANCE.................................................................................................................................14
PRECAUTIONSBEFORECLEANING..........................................................................................................................................14 
ROUTINECLEANING...........................................................................................................................................................14
EXTRAORDINARYCLEANING.................................................................................................................................................15
CLEANINGTHECERAMICGLASS............................................................................................................................................17
CLEANINGTHEFLUE...........................................................................................................................................................17
MAINTENANCE.................................................................................................................................................................17
THEDISPLAY..............................................................................................................................................................18
THEMENU.................................................................................................................................................................20
INITIALSTARTUP......................................................................................................................................................24
PELLETLOADINGANDCONNECTIONTOTHEELECTRICITYNETWORK.............................................................................................24
IGNITIONCYCLE................................................................................................................................................................24
STOVEWORKPHASE..........................................................................................................................................................25
STOVESWITCHOFF...........................................................................................................................................................25 
MODIFICATIONOFAMBIENTTEMPERATURESETTING................................................................................................................25
MODIFYINGTHEWORKINGPOWERSETTING...........................................................................................................................26
ALARMSIGNALS................................................................................................................................................................26
USEFULINFO…. ................................................................................................................................................................ 26
WHATHAPPENSIF.....................................................................................................................................................27
PCBPARAMETERS......................................................................................................................................................28
WIRINGDIAGRAM.....................................................................................................................................................30

2
ENGLISH
Dear Customer,
first of all, we would like to thank you for choosing a “KLOVER” stove and hope you
will be fully satisfied with your purchase.
Carefully read the warranty certificate on the last page of this User Guide; we advise you to contact the
authorised Technical Assistance Centre (TAC) for the initial start-up and calibration of your stove.
In thanking you once again for trusting KLOVER products, we also wish to inform you that these models are
the result our forty years experience in the construction of solid-fuel products for domestic heating.
Every single detail of the stove is manufactured by qualified staff, using the most advanced equipment.
The manual contains a detailed description of the stove and its operation, alongside instructions for proper
installation, basic maintenance and control points, which must be performed regularly; furthermore, it
contains practical advice for obtaining maximum performance from the stove with minimum fuel
consumption.
The stove's heat output may vary depending on the type of pellets used.
Enjoy heating up with KLOVER!
Technical Support
Klover pellet stoves are imported and distributed by FirePower Heating, Capton, Dartmouth, Devon, TQ6
0JE.
UK technical and product support is provided by FirePower Heating who can be reached on 0844 3320156.
Copyright
All rights reserved. The reproduction of any part of this manual in any form, without the explicit written
permission of KLOVER srl, is forbidden. The content of this manual can be modified without notice. Although
the documentation contained in this manual has been carefully collected and verified, KLOVER srl cannot be
held liable for its resulting use.
Copyright © 2015 KLOVER srl
Latest revision: January 2017
Rev. 1.2

3
ENGLISH
INTRODUCTION
Important security instructions
Read the following instructions prior to installing and using the product.
Stove installation and initial start-up must be performed by expert personnel conscious of the
importance of observing the applicable safety standards. Said personnel shall be responsible for
the definitive installation of the device and its proper operation thereof.
KLOVER srl shall not be held liable if these precautions are not observed.
During installation of the device, all local regulations - included those referring to national and
European Standards - must be observed.
Connect the flue gas outlet to a flue having the features described in the Connections section of this User
Guide.
The device is not suitable for installation on a shared flue system.
If the flue should catch fire, employ appropriate systems for extinguishing the flames or call the fire
brigade.
Connect the product to earthed sockets. Avoid using sockets controlled by switches or automatic timers.
Do not use a damaged or worn power supply cable.
If a multiple socket is used, make sure that the total voltage of the connected devices does not exceed
the voltage supported by the socket. Furthermore, make sure that the total voltage of all devices
connected to the socket does not exceed the maximum allowed level.
Do not use easily flammable substances to clean the device or its elements.
Do not leave flammable containers and substances in the room where the stove is installed.
Do not use the device as an incinerator or for any use other than that for which it was designed.
Do not use different fuels to those recommended.
Do not use liquid fuels.
The device - especially its external surfaces - becomes very hot to the touch during operation; handle it
with caution in order to avoid burns.
Only use original spare parts recommended by the manufacturer.
Do not perform any unauthorised modification on the device.
Using poor-quality pellets or pellets made of any other material may damage the stove's
functions, besides voiding the warranty and the manufacturer's liability.
The Klover pellet products are not suitable for use in smokeless zones.
A few precautions
Do not touch any hot parts of the product (ceramic glass, flue pipe) during normal operation.
Use the appropriate button to switch the electrical panel off. Do not disconnect the power supply cable
while the stove is operating.
Keep children away from the stove during normal operation, as they may suffer burns if they touch the
stove's hot parts.
Children and inexperienced people must not be allowed to use the device.
NEVER open the door of the stove during normal operation.
Intended use
The automatic operation DEA ECO stove by Klover is designed for heating your entire home.
The stove works exclusively with wood pellets and only with the hearth door shut. Never open the
door while the device is operating.
The stove comes with a DOUBLE COMBUSTION system guaranteeing “clean” flue gas emissions with
among the lowest CO2values in Europe, alongside excellent mean performance values.
Do not use the stove in ways other than those indicated in this user guide. The stove is designed for
indoor use only.
This user guide constitutes an integral part of the stove.
If the product is sold to another user, this manual must be handed down to the new owner.

4
ENGLISH
KLOVER S.R.L. DECLINES ALL LIABILITY IN CASE OF ACCIDENTS DUE TO FAILURE TO COMPLY
WITH THE SPECIFICATIONS OF THIS MANUAL.
KLOVER S.R.L. DECLINES ALL LIABILITY DUE TO INCORRECT USE OF THE PRODUCT BY THE
USER, UNAUTHORISED MODIFICATION AND/OR REPAIRS, AND USE OF NON-ORIGINAL SPARE
PARTS OR SPARE PARTS NOT SPECIFICALLY DESIGNED FOR USE ON THIS PRODUCT MODEL.
KLOVER S.R.L. SHALL NOT BE HELD LIABLE FOR THE STOVE'S INSTALLATION. THE INSTALLER
IS THE SOLE PARTY RESPONSIBLE FOR THIS OPERATION AND IS ALSO ENTRUSTED WITH
CHECKING THE FLUE, EXTERNAL AIR VENT AND THE CORRECTNESS OF THE PROPOSED
INSTALLATION SOLUTIONS. ALL THE SAFETY REGULATIONS CONTAINED IN THE SPECIFIC LAWS
IN FORCE IN THE COUNTRY OF THE STOVE'S INSTALLATION MUST BE OBSERVED.
EXTRAORDINARY MAINTENANCE MUST ONLY BE PERFORMED BY AUTHORISED AND QUALIFIED
STAFF.
To ensure the validity of the warranty, the user must comply with the indications contained in this
guide and, in particular, must:
Use the stove within its operational limits;
Regularly perform all maintenance activities;
Authorise expert and competent people to use the stove.
Failure to comply with the requirements of this guide shall automatically void the warranty.
Installation Regulations
These operating and instructions cover the basic principles to ensure the correct installation of the pellet
stove, although particulars may need modification to reflect local site conditions. In all cases the installation
must comply with current Building Regulations, Local Authority By-laws and other regulations that affect the
installation of the stove.
The Building Regulations requirements can be met by adopting the relevant recommendations given in
British Standards BS 8303, BS 6461 and BS 7566 as
an alternative means to achieve an equivalent level of performance to that obtained by following the
guidance given in Approved Document J.
Health and Safety
Care must be taken when installing a Klover pellet stove to ensure that the requirements of the Health and
Safety at Work Act are met.
Handling
Adequate facilities must be available for loading, unloading and site handling the appliance bearing in mind
the weight of the appliance.

5
ENGLISH
THE MACHINE AND THE PELLETS
Stove components
The stove is delivered with the following equipment:
ONE USE, INSTALLATION AND MAINTENANCE GUIDE;
ONE WARRANTY COUPON;
ONE POWER SUPPLY CABLE.
This manual is an integral part of the machine: if the stove is sold, it must be handed down to the new owner.
AMBIENT
TEMPERATURE
SENSOR
PELLET TANK
SECURITY
THERMOSTAT
MANUAL REARM
AIR INTAKE PIPE FLUE GAS
OUTLET
MAIN SWITCH,
ATTACHMENT FOR POWER
SUPPLY CABLE
AND 2 INCORPORATED FUSES
(4A 250V)

6
ENGLISH
Connections data sheet
S= Ø 80 mm M FLUE GAS OUTLET
A= Ø 33 mm AIR EXTRACTION DEVICE
E= SWITCH WITH ELECTRIC CABLE CONNECTION
REAR
VIEW

7
ENGLISH
Technical features
Nominal heat input kW 13,6 (2,5)
Nominal heat output (reduced) kW
12,1 (2,3)
(Reduced) nominal output performance % 89,1 (93,2)
CO at 13% oxygen at (reduced) nominal output % 0,019 (0,059)
Combustion gas mass at nominal heat output (reduced) g/s 8,2 (4,4)
Average flue gas temperature at nominal heat output (reduced) °C 170,2 (53,7)
Heatable volume with 35 Kcal/m3demand (45 Kcal/m3) m3300 (235)
Pellet chimney minimum draught Pa 12,1 (12,1)
Pellet tank capacity Kg 27
Pellet min –max hourly consumption Kg/h
2,81 (0,51)
Operating autonomy at minimum (maximum) output h 10 (53)
Flue pipe diameter mm 80
Nominal voltage V 220
Nominal frequency Hz 50
* Maximum power absorbed during operation W 300
Width mm 485
Height mm 1050
Depth mm 600
Weight Kg 115
Minimum safety distance from flammable materials mm 200
The data reported above is indicative and not binding. The manufacturer reserves the right to effect any
modifications to the product in order to improve its performance.
The heat output may vary according to the type of pellet used.

8
ENGLISH
Pellet features
The stove has been tested with all types of pellets available on the market. The pellets used must also have
the following features:
Diameter 6 mm;
Maximum length 35 mm;
Maximum humidity content 8 –9 %;
100% wood. Total absence of additives.
Maximum ash residue 1.1 %
For optimal stove efficiency, we recommend using good-quality pellets. The pellets must be introduced
into the tank using a shovel and not directly from the bag.
To identify good-quality pellets, it is necessary that:
They are manufactured from constant diameter cylinders and have a smooth, shiny surface;
There is not a lot of sawdust inside the packaging;
After grabbing a bunch of pellets and placing them into a container filled with water, good-quality pellets
will sink and poor-quality will tend to float;
The quality certification data, in particular conformity to international standards such as EN14961-2, DIN
51731 and O-NORM M7135, are indicated on the packaging;
The packages are intact, since pellets tend to absorb humidity. Humidity not only reduces the calorific
value and increases the amount of flue gases expelled, but also causes swelling of the product which
may create problems with the stove.
The international regulations on pellet production must be observed - as already occurs in France, Austria
and Germany alongside several Eastern European countries, which must comply with the EN14961-2, DIN
51731 and O-NORM M7135 regulations governing the minimum values for verifying pellet quality. In Italy
there is no official standard, although it is advisable to use pellets complying with the aforementioned
regulations.
The use of poor-quality pellets or pellets made of other materials can damage the stove's functions,
besides voiding the warranty and the manufacturer's liability.
In order to guarantee trouble-free combustion, the pellets must be stored in a humidity-free place.

9
ENGLISH
REQUIREMENTS OF THE PLACE OF INSTALLATION
Positioning
The initial phase for best stove installation is to determine its optimal location; the following elements need to
be considered:
The possibility of including an external air vent;
The possibility of creating a straight flue, preferably coaxial to the stove outlet;
The possibility of connecting the stove to a power socket;
Ease of access for cleaning the stove, the flue gas exhaust pipes and the flue.
The stove must be installed on a floor with suitable load-bearing capacity. If the existing building does not
fulfil this requirement, appropriate measures (e.g. load distribution plate) must be taken.
Once the best location for installing the device has been determined, position the stove according to the
indications provided below.
The minimum safety distance from flammable materials must be at least 200 mm from the sides and
back of the stove.
Spaces around and above the stove
The figure below indicates the minimum measurements to be observed when positioning the stove in relation
to the walls.
REAR WALL
SIDE WALL
SIDE WALL
50 cm 50 cm
10 cm
Any shelves or false ceilings mounted above the stove must be at least 50 cm away from the latter's upper
part.
External air vent
During operation, the stove takes in air from the environment in which it is installed; It is therefore essential
that this air is replaced through an external air vent.
If the wall behind the stove is on the outside, make a 15 cm diameter hole 20 cm from the ground (see Fig.
A).
Furniture and movable objects must be positioned at least 20 cm from the stove's side walls; these objects
must be moved when performing maintenance on the stove.
It is forbidden to hang shelves or build false ceilings above the stove less than 50 cm above the stove itself.
Protect all structures that can catch fire from heat radiation.
The hole must be protected externally with a fixed grid. Periodically check that the grid is not obstructed
by leaves or similar, as this may block the passage of air.
If it is not possible to include an air vent in the wall behind the stove, make a hole in a perimeter wall in the
room where the stove is installed.

9
ENGLISH
If it not possible to include the external air vent in the same room where the stove is installed, the hole can
be made in an adjacent room as long as it is permanently connected by means of a transit hole (15 cm
minimum diameter).
The UNI 10683 Standard FORBIDS the withdrawal of combustion air from garages, combustible
material warehouses, or from businesses with a fire hazard.
Do not connect the external air vent to the stove through piping.If there are other heating or
extraction devices inside the room, the air vents must guarantee a sufficient amount of air for
properly operating all the devices.
Only sealed equipment (e.g. C-type gas devices, as defined by the UNI 7129 C standard) or
equipment that does not depressurise the room compared to the outside environment can be housed
-whether existing or newly installed - in the room where the stove is installed.
Extractor fans can cause operating problems to the stove when they are installed in the same room or space
as the device.
Fig. A
Chimney and Flue pipe
The chimney is essential to the efficient operation of a Klover appliance. The chimney should be designed and
constructed according to these instructions, and relevant regulations including Building Regulations Approved
Document J.
Shape and size of chimney: A round chimney of 125mm diameter is recommended. 125mm is also the
minimum diameter which should be used. If the appliance is DEFRA Exempt then it should be connected to a
125mm chimney as standard (assuming that the outlet is not larger than 125mm). If it is not DEFRA Exempt
then a calculation according to BS EN 13384-1:2002 must be completed if it is to be connected to a 125mm
diameter chimney.
The maximum recommended round chimney diameter is 150mm.
Square or rectangular cross-sections must have rounded corners with radius not less than to 20 mm
Rectangular cross-sections must have a maximum ratio of 1.5 between the sides.
The chimney must have a constant, and unobstructed, internal cross section
Under no circumstances should the chimney be of a smaller diameter than the appliance outlet.
Connecting flue pipe: Short runs of single skin flue pipe to connect to the chimney may be run in a (minimum)
diameter of 100mm (as long as this is not smaller than the appliance outlet).

10
ENGLISH
Existing chimneys: Existing masonry chimneys should be lined with flexible stainless steel liner and the liner should be
insulated. All connections must be appropriately sealed.
Existing chimneys must be inspected, be clear of obstruction and have been swept clean immediately before installation
of the lining system.
No shared chimneys: Each appliance must connect to its own flue. No other appliance must connect to the same flue or
chimney. No other pipes or conduits must pass through the chimney or flue.
Sealed joins and connections: The appliance works with the combustion chamber in negative pressure and the flue pipe
under positive pressure; it is essential that all joints and flue and chimney connections are sealed. Single skin and twin
wall flue pipe should incorporate silicone seals at each joint. Other connections should be sealed with a suitable sealant
(for example high temperature silicone). All seals must be able to withstand 250ºC or more.
Suitable materials: Flue and chimney products used, including fixings and components, must be made of suitable, non-
combustible materials conforming to the applicable regulations.
Aluminium and fibre cement pipes are forbidden.
Orientation and initial vertical rise: The flue system should run as vertically as possible as any deviations off the vertical
can adversely affect the draw. 45º is the maximum off-vertical angle than may be used. Non-vertical sections should
make up no more than ¼ of the effective height of the flue or chimney (measured from the appliance outlet to the top of
the chimney), and must not be longer than 2,000 mm.
There should be no more than 4 bends in the system, with a tee counting as 2 bends.
Securely fix and support the system to avoid vibration and movement.
90º bends should not be used. When using the rear outlet on the appliance a 90º tee should be used with sweeping
access and debris collection space.
When using the rear outlet any horizontal run should not exceed 150mm, including the arm of the tee.
An initial vertical run of 600mm from the appliance is recommended before any change in direction.
Cleaning Access: The system must provide access so that the entire system can be swept and cleaned.
Flue pipes must not pass through rooms in which the installation of combustion devices is prohibited.
IT IS STRICTLY FORBIDDEN TO INSTALL FLUE DAMPERS/BUTTERFLY VALVES.
Heat shielding: If combustible materials are present then minimum separation distances will need to be adhered or heat
shielding will be required. Please refer to Building Regulations Approved Document J, and also these installation
instructions.

11
ENGLISH
Height and draught: In order for the appliance to perform satisfactorily the chimney height must be sufficient to
ensure a draught of 12 Pa so as to clear the products of combustion and prevent smoke problems into the room.
A chimney height of not less than 4.5 m measured vertically from the outlet of the stove to the top of the chimney
should be satisfactory. Alternatively the calculation procedure given in BS EN 13384-1:2002 may be used as the
basis for deciding whether a particular chimney design will provide sufficient draught.
The outlet from the chimney should be above the roof of the building in accordance with the provisions of Building
Regulations Approved Document J diagram 17 or 18. Please see the diagram below.
Termination/Cowl: The cowl terminates the chimney and it is recommended that an effective anti-downdraft cowl
should always be used. It must have a usable outlet cross-section no less than double that of the flue onto which it is
inserted. In must prevent rainwater or snow entry. It must be ensure the discharge of combustion by-products even in
the event of winds from every direction and inclination.

13
ENGLISH
ELECTRICAL CONNECTION
The electric connection must be performed by qualified staff only, in conformity to all general and local
safety standards in force.
Check that the power supply voltage and frequency correspond to 220V –50 Hz.
The device's safety is guaranteed when the latter is properly connected to an efficient earthing system.
In the electric connection to the mains power supply, include a 6 A –Id 30 mA differential magnetothermic
circuit breaker switch with suitable breaking load. The electric connections, including earthing, must be made
after shutting off the electrical system.
When completing the system, bear in mind that the cables must be placed in an unmovable manner and far
from parts subject to high temperatures. During the final wiring of the circuit, only use components with a
suitable electrical protection rating.
KLOVER srl declines all responsibility for injury to persons and animals or damage to objects due to
failure to connect the stove to earth or to comply with IEC specifications.
The electronic control unit manages and controls all the stove functions, and ensures optimal operation of the
device at all times.
The stove can only be installed in a room housing another boiler provided that the latter is a sealed-
chamber device.
THE STOVE MUST BE MOUNTED EXCLUSIVELY BY QUALIFIED PERSONNEL. STRICTLY COMPLY
WITH THE INSTRUCTIONS CONTAINED IN THIS GUIDE.
THE MANUFACTURER DECLINES ANY RESPONSIBILITY FOR DAMAGES CAUSED BY INCORRECT
ASSEMBLY.
DO NOT PASS ELECTRIC CABLES IN THE IMMEDIATE VICINITY OF THE FLUE GAS PIPE, UNLESS
THEY ARE INSULATED WITH SUITABLE MATERIALS.

14
ENGLISH
CLEANING AND MAINTENANCE
Precautions before cleaning
Before carrying out any cleaning or maintenance operations, make sure that:
The stove is turned off and all its parts have cooled down completely;
The ash is completely cold;
Before re-starting the stove, re-install all previously removed components.
During cleaning operations, use the personal protection devices specified in Directive 89/391/EEC.
The cleaning frequency depends on the type and quality of the pellets used. The schedule indicated below
may therefore vary.
Any problem affecting the stove caused by lack of cleaning will not be covered by the warranty.
Routine cleaning
The stove requires regular cleaning at least every 20 days of operation or after 3-4 ignitions, so as to always
guarantee efficient performance and optimal operation.
Pull the front knob to clean the ventilated hot air tubes above the combustion chamber. The knob must only
be pulled when the stove is turned off and cold.
Carefully clean any combustion residues from the brazier, by removing it from its housing. Use an ash
vacuum cleaner to remove any ash deposited under the brazier.

15
ENGLISH
Empty the ash drawer.
ATTENTION: use suitable “bin” type vacuum cleaners equipped with a fine mesh filter, in order to prevent
part of the ash from being spilled and thus damaging the cleaner itself.
Extraordinary cleaning
To be performed at least every 30 days.
Perform routine cleaning;
After having removed the ash drawer, extract the underlying base.
1
2

16
ENGLISH
Dismount the 4 flue diverters (2 on the right and 2 on the left) placed on the combustion chamber sides and
scrape the internal walls with a spatula removing any deposit.
Aspirare il deposito all’interno utilizzando un aspiracenere idoneo e poi riposizionare il fondo ed il cassetto
cenere.
Fare attenzione a non forzare con il
tubo del aspiracenere le alette
dell’as
p
iratore fumi.
1
2
1
2

17
ENGLISH
For correct functioning, it is necessary to use a suction device to remove the sawdust deposit on the
base of the tank at least every 15 days.
The pellet tank must be emptied at the end of every season.
Cleaning the ceramic glass
Always clean the glass when the stove is off and completely cold. Use a damp cloth or a detergent specifically
formulated for ceramic glass. Do not use abrasive sponges.
Cleaning the flue
This operation must be performed at least twice a year, at the beginning and half-way through the winter
season, and - at all events - whenever necessary.
It is important to check for any obstructions in the flue before switching the stove on following long periods of
idleness.
If cleaning is not performed, the operation of the stove and its components may be jeopardised.
The cleaning frequency of the stove and flue depend on the quality of the pellets used.
USE HIGH-QUALITY PELLETS FOR BEST RESULTS.
Maintenance
Timely and systematic maintenance is essential for guaranteeing correct operation, optimal heat performance
and durability of the device. Therefore, qualified staff should check the stove at least once a year at the
beginning of the season.
It is advisable to stipulate an annual contract for product maintenance with the Authorised Technical
Assistance Centre (TAC).

18
ENGLISH
THE DISPLAY
The device's operating mode is displayed on the console. After turning on the menu, it is possible to choose
many types of visualisations and perform the available settings according to the selected menu.
The picture below describes the meaning of the buttons and LEDs present on the console.
Meaning of the LEDs
LED MEANING WHEN ON
TEMPERATURE SET the LED is on when the ambient temperature is being modified
POWER SET the LED is on when the working power is being modified
PROGRAMMABLE
THERMOSTAT the LED is on when at least one switch on/off programme is active.
SCREW FEED the LED is on when the pellet loading gearmotor switches on.
FAN the LED is on when the hot air fan is active.
ON/OFF
the LED flashes during the ignition, switch-off, STOP ECO stand-by and alarm
ph
ases. The LED is on duri
ng
the work
ph
ase followin
g i
g
nition.
IGNITION HEATING
ELEMENT the LED is on when ignition heating element is active.
ALARM the LED is on when the stove is in alarm mode.
Programmable
thermostat LED
Infrared sensor
Tem
pe
rature set LED
Screw feed LED
ON/OFF LED
Fan LED
P1 button
- decrease
- menu
- temperature set
Alarm LED
Ign
ition heati
ng
element LED
P3 button
- ON/OFF
- Esc
- confirm
Power set LED
Mode -
po
wer -
pa
rameter dis
pl
a
y
P2 button
- increase
- stove
status

19
ENGLISH
Button functions
BUTTON MODE ACTION
1
TEMPERATURE SET... Decreases the TEMPERATURE SET temperature value
POWER SET... Decreases the POWER SET value
MENU... Moves to the previous menu
MENU PROGRAMMING... Decreases the value of the selected menu
PARAMETERS PROGRAMMING... Decreases the value of the parameter
2
TEMPERATURE SET... Increases the TEMPERATURE SET temperature value
POWER SET... Increases the POWER SET value
MENU... Moves to the successive menu
MENU PROGRAMMING... Increases the value of the selected menu
PARAMETERS PROGRAMMING... Increases the value of the parameter
3
OFF/WORK MODE... Ignites or switches off the stove when pressed for 2 seconds
ALARM BLOCK... Releases alarm
MENU... Allows for accessing the selected menu
MENU PROGRAMMING... Allows for accessing/exiting the selected menu
PARAMETERS PROGRAMMING... Allows for confirming a parameter and passing on to the next
one
BUTTON 1: When first pressed, it allows for accessing the TEMPERATURE SET function to set the
desired ambient temperature. When held depressed, it allows for accessing the USER MENU.
BUTTON 2: When first pressed, it allows for accessing the POWER SET function to set the desired
working power. When held depressed, it allows for accessing the technical data relative to the device.