KNIPEX 16 60 06 SB User manual

KNIPEX Quality – Made in Germany
EN Stripping Tool
for coax and data cables
Operating instructions 16 60 06 SB
1
6
6
0
0
6
K
N
I
P
E
X

2 Status: 02.11.20
CONTENTS
1 General 3
1.1 Notes on operating instructions 3
1.2 Symbols used 3
1.3 Copyright 3
1.4 Guarantee and warranty 4
2 Safety 4
2.1 Intended use 4
3 Design and function 5
3.1 Design 5
3.2 Function 5
4 Operation 6
4.1 Stripping coax cables 6
4.2 Cutting and stripping CAT 5 - 7 data cables (UTP / STP) 7
4.3 Cuttingandstrippingatcables
(Telephone cables 4p / 6p / 8p) 8
5 Maintenance 9
6 Technical data 9
6.1 Technical data 9
7 Disposal 9

GENEral
3 Status: 02.11.20
1 General
1.1 Notes on operating instructions
These operating instructions are designed to enable you to use your tool
safelyandefciently.
The tool may only be used if it is in technically perfect condition.
As a consequence of technical developments, the illustrations and
descriptions contained in these operating instructions may differ slightly
from the tool actually delivered.
We do not accept any liability for damage caused by failure to observe these
operating instructions.
1.2 Symbols used
All safety instructions in these operating instructions are indicated by
corresponding symbols. The signal words at the beginning of each safety
instruction express the extent of the hazard.
Danger!
Level 1 risk source
This combination of symbol and signal word indicates an imminently
hazardous situation that will result in death or serious injury if not avoided.
Warning!
Level 2 risk source
This combination of symbol and signal word indicates a possibly hazardous
situation that may result in death or serious injury if not avoided.
Caution!
Level 3 risk source
This combination of symbol and signal word stands for important information
that will assist in preventing damage to property or the environment.
1.3 Copyright
These operating instructions and all documentation supplied with this tool
are protected by copyright and remain the property of KNIPEX.
The reprinting of these instructions, even in extract form, is only permitted
with the written consent of C. Gustav Putsch KG.

SafETy
4 Status: 02.11.20
1.4 Guarantee and warranty
The manufacturer grants a statutory warranty in accordance with the
current sales and delivery conditions. No further warranties or assurances
are granted.
Within the warranty period, the warranty covers the rectication of all
defects that can be traced back to material faults or manufacturing errors.
Wearing parts are excluded from the warranty.
The repair or replacement of a tool shall not result in an extension of the
warranty period. Tools shall only be repaired or replaced with "as new"
parts, whose function corresponds to that of the old parts. All defective and
hence replaced parts are the property of the manufacturer.
Warranty claims shall expire in particular if:
• Damage is caused through improper operation, use for purposes other
thanthosespeciedbythemanufacturer,orpoormaintenance.
• Repairs or conversions are carried out by unauthorized persons.
• Original accessories or spare parts from KNIPEX are not used.
• Defective components are not repaired immediately to minimise the
extent of the damage and so as not to impair the safety of the tool
(obligation to repair).
2 Safety
2.1 Intended use
The tool is intended for the following uses:
• Cutting and stripping coax cables (RG 6, RG 7, RG 11, RG 59)
• Cutting and stripping data cables CAT 5 - 7 (UTP / STP)
• Cutting and stripping telephone ribbon cables (4p, 6p, 8p)
The tool must not be used for the following applications:
• Cutting steel
Any use beyond the intended purpose or any unauthorized modication
shall be considered improper. The operator shall be liable for damages
resulting from improper use.
Intended use also includes adhering to these operating instructions. They
must be read in full before use.
Warning!
Danger from sharp blades!
Handling sharp blades is dangerous. For this reason, make sure to handle
your tools with care when working.

DESiGN aND fuNCTiON
5 Status: 02.11.20
3 Design and function
3.1 Design
1
6
6
0
0
6
K
N
I
P
E
X
12
5 6 7
3 4
8
Design of the stripping tool
Legend:
1 Holder for coax cable
2 Adjustment wheel for data-cable stripping blade
3 Blade for cutting data cables
4 Ribbon cable (telephone cable) holder
5 Roughened surface for trimming off shielding wires
6 Blade insert for selecting cable type (coax cable)
7 Data cable holder
8 Finger loop for turning the tool
3.2 Function
Data cables can be cut to length and stripped using the stripping tool.
Cutting: press the pliers handles together.
Stripping:turnthetoolusingthengerloop.

OpEraTiON
6 Status: 02.11.20
4 Operation
4.1 Stripping coax cables
Depending on the cable type (RG 59 / RG 6 or RG 7 / RG 11), the black blade
insert is used in two different positions.
RG 59, RG 6
RG 7, RG 11
Adjusting the tool for different cable types
1. Select the blade insert position that matches the cable type and insert
itintothetoolwiththecablespecicationfacingup(59/6or7/11).
2. Cut off the end of the cable being stripped, ensuring a straight cut.
3. Place this end into the coax cable holder.
Stripping coax cables
4. Twist the tool a few times to strip the cable.
5. Remove the cable from the holder and trim back the shielding
wiresusingtheroughenedsurfaceofthetool(dependingonthe
Fconnectortype).

OpEraTiON
7 Status: 02.11.20
4.2 Cutting and stripping CAT 5 - 7 data cables (UTP / STP)
Depending on the cable type and insulation thickness, the height of the
blade has to be adjusted individually (+/-).
1. Cut off the end of the cable being stripped, ensuring a straight cut.
Straight cutting of data cables
2. Place this end into the data cable holder.
Adjusting the stripping blade
3. Adjust the height of the stripping blade to match the thickness of the
sheathing.
Stripping data cables
4. Twist the tool a few times to strip the cable.
Note:
To avoid damaging the conductors in the
cable, do not set the stripping blade too
deep. Adjust the setting step by step.

OpEraTiON
8 Status: 02.11.20
4.3 Cutting and stripping at cables
(Telephone cables 4p / 6p / 8p)
Cutting and stripping ribbon cables
1. Place the end of the cable in the ribbon cable holder.
2. Squeeze the tool together.
Withdrawing the ribbon cable to strip the insulation
3. Pullthestrippedcablermlyoutofthetooltostripthecable.
Note:
During repeated use, check the holder for
any cable remnants and remove them as
necessary.

MaiNTENaNCE
9 Status: 02.11.20
5 Maintenance
The tool is maintenance-free.
6 Technical data
6.1 Technical data
Technical data Unit
Item number –16 60 06 SB
Length mm 125
Weight g100
Properties –with opening spring
Cable types –RG 6, RG 7, RG 11, RG 59,
data cables, telephone ribbon cables
7 Disposal
The tool can be disposed of as household waste.

C 4711/DE/01/02.17/20.000
KNIPEX-Werk
C. Gustav Putsch KG
42337 Wuppertal
Tel.: +49 202 – 47 94-0
Fax: +49 202 – 47 74 94
[email protected]
www.knipex.com